Comment # 8 on bug 1131976 from Dr. Werner Fink

(In reply to Dr. Werner Fink from comment #7)
> (In reply to Denis Kirjanov from comment #6)
> > (In reply to Dr. Werner Fink from comment #5)
> > > (In reply to Denis Kirjanov from comment #4)
> > > > Could you please try to just switch off GRO?
> > > > 
> > > > Thank you.
> > > 
> > > You mean GRO only and TSO, GSO back to on?
> > 
> > Right
> 
> Done ... let's if this is stable

Currently I do not see any problems here

 dmesg -T | grep e1000e
 [Tue Nov 19 12:57:27 2019] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 [Tue Nov 19 12:57:27 2019] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 [Tue Nov 19 12:57:27 2019] e1000e 0000:00:19.0: Interrupt Throttling Rate
(ints/sec) set to 2000
 [Tue Nov 19 12:57:27 2019] e1000e 0000:00:19.0: PHY Smart Power Down Enabled
 [Tue Nov 19 12:57:27 2019] e1000e 0000:00:19.0 eth0: (PCI
Express:2.5GT/s:Width x1) 00:1c:c0:a4:1c:14
 [Tue Nov 19 12:57:27 2019] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
 [Tue Nov 19 12:57:27 2019] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No:
FFFFFF-0FF
 [Tue Nov 19 12:57:40 2019] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
 [Tue Nov 19 14:48:07 2019] e1000e: eth0 NIC Link is Down
 [Tue Nov 19 14:48:10 2019] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx
 [Wed Nov 20 10:42:31 2019] e1000e: eth0 NIC Link is Down
 [Wed Nov 20 10:42:34 2019] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: Rx/Tx