(In reply to Thomas Blume from comment #42) > (In reply to Sebastian Kuhne from comment #41) > > > > OK, executed and attached, with udev_log="debug" and as root. > > Unfortunately, the udev verbose log is still not visible in the logs. > However, the problem is visible, after mounting swap and home, there is a > delay of about 45s: > > -->-- > Jan 15 16:21:53 linux-1r76 systemd-fsck[430]: /dev/sda6: clean, > 75903/18096128 files, 64059249/72373334 blocks > Jan 15 16:21:53 linux-1r76 kernel: Adding 2104476k swap on /dev/sda1. > Priority:-1 extents:1 across:2104476k FS > Jan 15 16:21:55 linux-1r76 kernel: EXT4-fs (sda6): mounted filesystem with > ordered data mode. Opts: (null) > Jan 15 16:22:40 linux-1r76 kernel: usbcore: registered new interface driver > snd-usb-audio > Jan 15 16:22:40 linux-1r76 lvm[444]: WARNING: lvmetad is running but > disabled. Restart lvmetad before enabling it! > Jan 15 16:22:41 linux-1r76 lvm[444]: No volume groups found > Jan 15 16:22:41 linux-1r76 lvm[446]: WARNING: lvmetad is running but > disabled. Restart lvmetad before enabling it! > Jan 15 16:22:41 linux-1r76 lvm[446]: No volume groups found > --<-- > > Strange are the lvm messages. > It seems you don't have any lvm setup. > Can you confirm this? > If so, please edit /etc/lvm/lvm.conf and change the use_lvmetad parameter to: > > use_lvmetad = 0 > > In addition, please deactivate the lvmetad socket via: > > systemctl disable lvm2-lvmetad.socket > > I have tried to reproduce the problem with the latest factory build > (20150107) but couldn't see any of the above problems. > So I would recommend that you update your test system to latest factory > before you do the next tests. > > If it still doesn't work with the above settings, please provide the output > of journalctl -axb again (please keep udev_log="debug" in > /etc/udev/udev.conf). Hi Thomas, use_lvmetad = 0 was already activated. I have executed "systemctl disable lvm2-lvmetad.socket", and the output of journalctl -axb attached (udev_log="debug"). Sorry for this issue. Many thanks for your help! Best regards Sebastian