But it work under Windows 7 fine. 
I turned off usb3.0 in bios, So usb working in usb 2.0 state. Logs of
journalctl -f when i plug in the printer in usb port.  

������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: new high-speed USB device number
7 using ehci-pci
������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: New USB device found,
idVendor=03f0, idProduct=2b17, bcdDevice= 1.00
������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: Product: HP LaserJet 1020
������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: Manufacturer: Hewlett-Packard
������ 14 16:31:39 lnxvrxtosh kernel: usb 1-1.5: SerialNumber: FN27X5A
������ 14 16:31:39 lnxvrxtosh root[4210]: udev hpmud.rules runs hp-firmware to
test if HP device with USB vendor ID 03f0 and USB product ID 2b17 at USB bus ID
001 and USB device ID 007 needs firmware and if yes to upload it
������ 14 16:31:39 lnxvrxtosh python3[4211]: io/hpmud/musb.c 2185: [4211]
hpmud_make_usb_uri() bus=001 dev=007
������ 14 16:31:39 lnxvrxtosh python3[4211]: io/hpmud/musb.c 2282:
hpmud_make_usb_uri() uri=hp:/usb/HP_LaserJet_1020?serial=FN27X5A bytes_read=39
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 427: Found interface
conf=0, iface=0, altset=0, index=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 389: Active kernel
driver on interface=0 ret=0
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 535: claimed 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 780: read actual
device_id successfully fd=1 len=82
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 561: released 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 427: Found interface
conf=0, iface=0, altset=0, index=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 389: Active kernel
driver on interface=0 ret=0
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 535: claimed 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 780: read actual
device_id successfully fd=1 len=82
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 561: released 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 427: Found interface
conf=0, iface=0, altset=0, index=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 389: Active kernel
driver on interface=0 ret=0
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 535: claimed 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 780: read actual
device_id successfully fd=1 len=82
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 561: released 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 427: Found interface
conf=0, iface=0, altset=0, index=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 389: Active kernel
driver on interface=0 ret=0
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 535: claimed 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 780: read actual
device_id successfully fd=1 len=82
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 561: released 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 960: new PRINT
channel=2 clientCnt=1 channelCnt=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 427: Found interface
conf=0, iface=0, altset=0, index=1
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 389: Active kernel
driver on interface=0 ret=0
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 535: claimed 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 561: released 7/1/2
interface
������ 14 16:31:40 lnxvrxtosh python3[4211]: io/hpmud/musb.c 975: removed PRINT
channel=2 clientCnt=0 channelCnt=0
������ 14 16:31:41 lnxvrxtosh kernel: WARNING! power/level is deprecated; use
power/control instead
������ 14 16:31:41 lnxvrxtosh systemd[1]: Created slice
system-configure\x2dprinter.slice.
������ 14 16:31:41 lnxvrxtosh systemd[1]: Reached target Printer.
������ 14 16:31:41 lnxvrxtosh systemd[1]: Started Configure Plugged-In Printer.
������ 14 16:31:41 lnxvrxtosh systemd[2505]: Reached target Printer.
������ 14 16:31:42 lnxvrxtosh udev-configure-printer[4319]: add usb-001-007
������ 14 16:31:42 lnxvrxtosh udev-configure-printer[4319]: device devpath is
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5
������ 14 16:31:46 lnxvrxtosh kernel: usblp 1-1.5:1.0: usblp0: USB Bidirectional
printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
������ 14 16:31:46 lnxvrxtosh kernel: usbcore: registered new interface driver
usblp
������ 14 16:31:46 lnxvrxtosh systemd[1]: configure-printer@usb-001-007.service:
Main process exited, code=exited, status=1/FAILURE
������ 14 16:31:46 lnxvrxtosh systemd[1]: configure-printer@usb-001-007.service:
Failed with result 'exit-code'.
������ 14 16:31:46 lnxvrxtosh mtp-probe[4389]: checking bus 1, device 7:
"/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5"
������ 14 16:31:46 lnxvrxtosh mtp-probe[4389]: bus: 1, device: 7 was not an MTP
device
������ 14 16:32:06 lnxvrxtosh kernel: usb 1-1.5: USB disconnect, device number 7
������ 14 16:32:06 lnxvrxtosh kernel: usblp0: removed
������ 14 16:32:09 lnxvrxtosh kernel: usb 1-1.2: new high-speed USB device number
8 using ehci-pci
������ 14 16:32:15 lnxvrxtosh kernel: usb 1-1.2: device descriptor read/8, error
-110
������ 14 16:32:20 lnxvrxtosh kernel: usb 1-1.2: device descriptor read/8, error
-110
������ 14 16:32:20 lnxvrxtosh kernel: usb 1-1.2: new high-speed USB device number
9 using ehci-pci
������ 14 16:32:24 lnxvrxtosh kernel: usb 1-1.2: device descriptor read/8, error
-71
������ 14 16:32:24 lnxvrxtosh kernel: usb 1-1.2: device descriptor read/8, error
-71
������ 14 16:32:24 lnxvrxtosh kernel: usb 1-1-port2: attempt power cycle
������ 14 16:32:26 lnxvrxtosh kernel: usb 1-1.5: new high-speed USB device number
11 using ehci-pci
������ 14 16:32:32 lnxvrxtosh kernel: usb 1-1.5: device descriptor read/8, error
-110
������ 14 16:32:37 lnxvrxtosh kernel: usb 1-1.5: device descriptor read/8, error
-110
������ 14 16:32:37 lnxvrxtosh kernel: usb 1-1.5: new high-speed USB device number
12 using ehci-pci
������ 14 16:32:42 lnxvrxtosh kernel: usb 1-1.5: device descriptor read/8, error
-110