Vidar Gudmundsson changed bug 987487
What Removed Added
CC   vidar@hi.is

Comment # 10 on bug 987487 from
Still same kind of problem, even after last Tumbleweed update 29.03. 2019.
hwinfo:

 26: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.386]
  Unique ID: _Znp.xe0yZMlAdY7
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated
Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x22b1 "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
Integrated Graphics Controller"
  SubVendor: pci 0x1558 "CLEVO/KAPOK Computer"
  SubDevice: pci 0x5108 
  Revision: 0x35
  Driver: "i915"
  Driver Modules: "i915"
  Memory Range: 0x80000000-0x80ffffff (rw,non-prefetchable)
  Memory Range: 0x90000000-0x9fffffff (ro,non-prefetchable)
  I/O Ports: 0xf000-0xf03f (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 118 (460 events)
  Module Alias: "pci:v00008086d000022B1sv00001558sd00005108bc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

>From /var/log/Xorg.0.log:

X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    30.091] Build Operating System: openSUSE SUSE LINUX
[    30.091] Current Operating System: Linux linux-0xvp 5.0.3-1-default #1 SMP
Fri Mar 22 17:30:35 UTC 2019 (2a31831) x86_64
[    30.091] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.3-1-default
root=UUID=5ce5a17d-22d9-4dda-b625-bd1626260693 resume=/dev/sda3 splash=silent
quiet showopts
[    30.091] Build Date: 26 March 2019  12:00:00PM
[    30.091]  
[    30.091] Current version of pixman: 0.36.0
[    30.091]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    30.091] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.091] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 30 17:21:37
2019
[    30.094] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    30.094] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.097] (==) No Layout section.  Using the first Screen section.
[    30.097] (==) No screen section available. Using defaults.
[    30.097] (**) |-->Screen "Default Screen Section" (0)
[    30.097] (**) |   |-->Monitor "<default monitor>"
[    30.098] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    30.098] (==) Automatically adding devices
[    30.098] (==) Automatically enabling devices
[    30.098] (==) Automatically adding GPU devices
[    30.098] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    30.102] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    30.102]    Entry deleted from font path.
[    30.103] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    30.103] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    30.103] (WW) Ignoring unrecognized extension "XFree86-DGA"
[    30.103] (II) The server relies on udev to provide the list of input
devices.
        If no devices become available, reconfigure udev or disable
AutoAddDevices.
[    30.103] (II) Loader magic: 0x55cbd648dd00
[    30.103] (II) Module ABI versions:
[    30.103]    X.Org ANSI C Emulation: 0.4
[    30.103]    X.Org Video Driver: 24.0
[    30.103]    X.Org XInput driver : 24.1
[    30.103]    X.Org Server Extension : 10.0
[    30.105] (++) using VT number 7

[    30.105] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[    30.107] (II) xfree86: Adding drm device (/dev/dri/card0)
[    30.124] (--) PCI:*(0@0:2:0) 8086:22b1:1558:5108 rev 53, Mem @
0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/131072
[    30.124] (II) LoadModule: "glx"
[    30.126] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    30.129] (II) Module glx: vendor="X.Org Foundation"
[    30.129]    compiled for 1.20.4, module version = 1.0.0
[    30.129]    ABI class: X.Org Server Extension, version 10.0
[    30.129] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI
ID's supported by the drivers
[    30.130] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI
ID's supported by the drivers
[    30.130] (==) Matched intel as autoconfigured driver 0
[    30.130] (==) Matched modesetting as autoconfigured driver 1
[    30.130] (==) Matched fbdev as autoconfigured driver 2
[    30.130] (==) Matched vesa as autoconfigured driver 3
[    30.130] (==) Assigned the driver to the xf86ConfigLayout
[    30.130] (II) LoadModule: "intel"
[    30.134] (WW) Warning, couldn't open module intel
[    30.134] (EE) Failed to load module "intel" (module does not exist, 0)
[    30.134] (II) LoadModule: "modesetting"
[    30.134] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    30.136] (II) Module modesetting: vendor="X.Org Foundation"
[    30.136]    compiled for 1.20.4, module version = 1.20.4
[    30.136]    Module class: X.Org Video Driver
[    30.136]    ABI class: X.Org Video Driver, version 24.0
[    30.136] (II) LoadModule: "fbdev"
[    30.136] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    30.137] (II) Module fbdev: vendor="X.Org Foundation"
[    30.137]    compiled for 1.20.3, module version = 0.5.0
[    30.137]    Module class: X.Org Video Driver
[    30.137]    ABI class: X.Org Video Driver, version 24.0
[    30.137] (II) LoadModule: "vesa"
[    30.137] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    30.138] (II) Module vesa: vendor="X.Org Foundation"
[    30.138]    compiled for 1.20.3, module version = 2.4.0
[    30.138]    Module class: X.Org Video Driver
[    30.138]    ABI class: X.Org Video Driver, version 24.0
[    30.138] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.138] (II) FBDEV: driver for framebuffer: fbdev
[    30.138] (II) VESA: driver for VESA chipsets: vesa
[    30.168] (II) modeset(0): using drv /dev/dri/card0
[    30.169] (WW) Falling back to old probe method for fbdev
[    30.169] (II) Loading sub module "fbdevhw"
[    30.169] (II) LoadModule: "fbdevhw"
[    30.169] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    30.169] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.169]    compiled for 1.20.4, module version = 0.0.2
[    30.170]    ABI class: X.Org Video Driver, version 24.0
[    30.170] (II) modeset(0): Creating default Display subsection in Screen
section
        "Default Screen Section" for depth/fbbpp 24/32
[    30.170] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    30.170] (==) modeset(0): RGB weight 888
[    30.170] (==) modeset(0): Default visual is TrueColor
[    30.170] (II) Loading sub module "glamoregl"
[    30.170] (II) LoadModule: "glamoregl"
[    30.170] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    30.183] (II) Module glamoregl: vendor="X.Org Foundation"
[    30.183]    compiled for 1.20.4, module version = 1.0.1
[    30.183]    ABI class: X.Org ANSI C Emulation, version 0.4
[    30.260] (II) modeset(0): glamor X acceleration enabled on Mesa DRI
Intel(R) HD Graphics 400 (Braswell) 
[    30.260] (II) modeset(0): glamor initialized
[    30.261] (II) modeset(0): Output eDP-1 has no monitor section
[    30.261] (II) modeset(0): Output DP-1 has no monitor section
[    30.263] (II) modeset(0): Output HDMI-1 has no monitor section
[    30.264] (II) modeset(0): Output DP-2 has no monitor section
[    30.456] (II) modeset(0): Output HDMI-2 has no monitor section
[    30.458] (II) modeset(0): EDID for output eDP-1
[    30.458] (II) modeset(0): Manufacturer: CMN  Model: 1130  Serial#: 0
[    30.458] (II) modeset(0): Year: 2013  Week: 52
[    30.458] (II) modeset(0): EDID Version: 1.4
[    30.458] (II) modeset(0): Digital Display Input
[    30.458] (II) modeset(0): 6 bits per channel
[    30.458] (II) modeset(0): Digital interface is DisplayPort
[    30.458] (II) modeset(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    30.458] (II) modeset(0): Gamma: 2.20
[    30.458] (II) modeset(0): No DPMS capabilities specified
[    30.458] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    30.458] (II) modeset(0): First detailed timing is preferred mode
[    30.458] (II) modeset(0): Preferred mode is native pixel format and refresh
rate
[    30.458] (II) modeset(0): redX: 0.570 redY: 0.333   greenX: 0.325 greenY:
0.582
[    30.458] (II) modeset(0): blueX: 0.160 blueY: 0.144   whiteX: 0.313 whiteY:
0.329
[    30.458] (II) modeset(0): Manufacturer's mask: 0
[    30.458] (II) modeset(0): Supported detailed timing:
[    30.458] (II) modeset(0): clock: 76.0 MHz   Image Size:  256 x 144 mm
[    30.458] (II) modeset(0): h_active: 1366  h_sync: 1436  h_sync_end 1482
h_blank_end 1599 h_border: 0
[    30.458] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776
v_blanking: 792 v_border: 0
[    30.458] (II) modeset(0):  N116BGE-EB2
[    30.458] (II) modeset(0):  CMN
[    30.458] (II) modeset(0):  N116BGE-EB2
[    30.458] (II) modeset(0): EDID (in hex):
[    30.458] (II) modeset(0):   00ffffffffffff000dae301100000000
[    30.458] (II) modeset(0):   34170104951a0e780214359255539529
[    30.458] (II) modeset(0):   24505400000001010101010101010101
[    30.458] (II) modeset(0):   010101010101b01d56e950001830462e
[    30.458] (II) modeset(0):   3500009010000018000000fe004e3131
[    30.458] (II) modeset(0):   364247452d4542320a20000000fe0043
[    30.458] (II) modeset(0):   4d4e0a202020202020202020000000fe
[    30.458] (II) modeset(0):   004e3131364247452d4542320a2000db
[    30.459] (II) modeset(0): Printing probed modes for output eDP-1
[    30.459] (II) modeset(0): Modeline "1366x768"x60.0   76.00  1366 1436 1482
1599  768 771 776 792 -hsync -vsync (47.5 kHz eP)
[    30.459] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512
1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    30.459] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320
1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    30.459] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472
1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    30.459] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360
1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212
1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    30.459] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128
1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    30.459] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088
1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    30.459] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060
1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200
1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064
1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160
1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    30.459] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104
1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    30.459] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128
1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    30.459] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000
1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    30.459] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124
1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    30.459] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000
1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    30.459] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088
1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    30.459] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040
1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    30.459] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928
1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    30.459] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
 600 601 605 628 +hsync +vsync (37.9 kHz d)
[    30.459] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
 600 601 603 625 +hsync +vsync (35.2 kHz d)
[    30.459] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980
1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    30.459] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920
 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    30.459] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072
 486 489 494 506 -hsync +vsync (30.3 kHz d)
[    30.459] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024
 486 489 494 500 +hsync -vsync (29.8 kHz d)
[    30.459] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940
 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    30.459] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928
1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    30.459] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880
 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    30.459] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844
 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    30.460] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924
 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    30.460] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780
 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    30.460] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900
 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    30.460] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800 
480 490 492 525 -hsync -vsync (31.5 kHz d)
[    30.460] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896 
405 408 413 422 -hsync +vsync (25.1 kHz d)
[    30.460] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880 
405 408 413 419 +hsync -vsync (24.7 kHz d)
[    30.460] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892
 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    30.460] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764
 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    30.460] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840
 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    30.460] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720
 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    30.460] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832
 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    30.460] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720
 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    30.460] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800 
360 363 368 376 -hsync +vsync (22.5 kHz d)
[    30.460] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800 
360 363 368 374 +hsync -vsync (22.2 kHz d)
[    30.460] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672
 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    30.460] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648
 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    30.460] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592
 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    30.460] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608
 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    30.460] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560
 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    30.460] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528
 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    30.460] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512
 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    30.460] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536
 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    30.460] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512
 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    30.460] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400
 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    30.460] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448
 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    30.460] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440
 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    30.460] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400
 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    30.460] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400
 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    30.460] (II) modeset(0): EDID for output DP-1
[    30.462] (II) modeset(0): EDID for output HDMI-1
[    30.463] (II) modeset(0): EDID for output DP-2
[    30.656] (II) modeset(0): EDID for output HDMI-2
[    30.656] (II) modeset(0): Output eDP-1 connected
[    30.656] (II) modeset(0): Output DP-1 disconnected
[    30.656] (II) modeset(0): Output HDMI-1 disconnected
[    30.656] (II) modeset(0): Output DP-2 disconnected
[    30.656] (II) modeset(0): Output HDMI-2 disconnected
[    30.656] (II) modeset(0): Using exact sizes for initial modes
[    30.656] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    30.656] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    30.656] (==) modeset(0): DPI set to (96, 96)
[    30.656] (II) Loading sub module "fb"
[    30.656] (II) LoadModule: "fb"
[    30.656] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    30.658] (II) Module fb: vendor="X.Org Foundation"
[    30.658]    compiled for 1.20.4, module version = 1.0.0
[    30.658]    ABI class: X.Org ANSI C Emulation, version 0.4
[    30.658] (II) UnloadModule: "fbdev"
[    30.658] (II) Unloading fbdev
[    30.658] (II) UnloadSubModule: "fbdevhw"
[    30.658] (II) Unloading fbdevhw
[    30.658] (II) UnloadModule: "vesa"
[    30.658] (II) Unloading vesa
[    30.678] (==) modeset(0): Backing store enabled
[    30.678] (==) modeset(0): Silken mouse enabled
[    30.752] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    30.753] (==) modeset(0): DPMS enabled
[    30.753] (II) modeset(0): [DRI2] Setup complete
[    30.753] (II) modeset(0): [DRI2]   DRI driver: i965
[    30.753] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    30.753] (II) Initializing extension Generic Event Extension
[    30.754] (II) Initializing extension SHAPE
[    30.754] (II) Initializing extension MIT-SHM
[    30.754] (II) Initializing extension XInputExtension
[    30.755] (II) Initializing extension XTEST
[    30.755] (II) Initializing extension BIG-REQUESTS
[    30.756] (II) Initializing extension SYNC
[    30.756] (II) Initializing extension XKEYBOARD
[    30.756] (II) Initializing extension XC-MISC
[    30.757] (II) Initializing extension SECURITY
[    30.757] (II) Initializing extension XFIXES
[    30.757] (II) Initializing extension RENDER
[    30.758] (II) Initializing extension RANDR
[    30.758] (II) Initializing extension COMPOSITE
[    30.759] (II) Initializing extension DAMAGE
[    30.759] (II) Initializing extension MIT-SCREEN-SAVER
[    30.759] (II) Initializing extension DOUBLE-BUFFER
[    30.760] (II) Initializing extension RECORD
[    30.760] (II) Initializing extension DPMS
[    30.760] (II) Initializing extension Present
[    30.761] (II) Initializing extension DRI3
[    30.761] (II) Initializing extension X-Resource
[    30.761] (II) Initializing extension XVideo
[    30.762] (II) Initializing extension XVideo-MotionCompensation
[    30.762] (II) Initializing extension GLX
[    30.777] (II) AIGLX: Loaded and initialized i965
[    30.777] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.777] (II) Initializing extension XFree86-VidModeExtension
[    30.777] (II) Initializing extension XFree86-DGA
[    30.778] (II) Initializing extension XFree86-DRI
[    30.778] (II) Initializing extension DRI2
[    30.787] (II) modeset(0): Damage tracking initialized
[    30.787] (II) modeset(0): Setting screen physical size to 361 x 203
[    30.984] (II) config/udev: Adding input device Power Button
(/dev/input/event6)
[    30.985] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.985] (**) Power Button: Applying InputClass "system-keyboard"
[    30.985] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.985] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[    30.985] (II) LoadModule: "libinput"
[    30.985] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[    30.990] (II) Module libinput: vendor="X.Org Foundation"
[    30.990]    compiled for 1.20.3, module version = 0.28.2
[    30.990]    Module class: X.Org XInput Driver
[    30.990]    ABI class: X.Org XInput driver, version 24.1
[    30.990] (II) Using input driver 'libinput' for 'Power Button'
[    30.990] (**) Power Button: always reports core events
[    30.990] (**) Option "Device" "/dev/input/event6"
[    30.991] (**) Option "_source" "server/udev"
[    31.002] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    31.002] (II) event6  - Power Button: device is a keyboard
[    31.003] (II) event6  - Power Button: device removed
[    31.024] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event6"
[    31.024] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[    31.024] (**) Option "xkb_model" "microsoftpro"
[    31.024] (**) Option "xkb_layout" "is"
[    31.024] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.076] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    31.076] (II) event6  - Power Button: device is a keyboard
[    31.077] (II) config/udev: Adding input device Video Bus
(/dev/input/event2)
[    31.077] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.077] (**) Video Bus: Applying InputClass "system-keyboard"
[    31.077] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.077] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    31.077] (II) Using input driver 'libinput' for 'Video Bus'
[    31.077] (**) Video Bus: always reports core events
[    31.077] (**) Option "Device" "/dev/input/event2"
[    31.078] (**) Option "_source" "server/udev"
[    31.080] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    31.080] (II) event2  - Video Bus: device is a keyboard
[    31.080] (II) event2  - Video Bus: device removed
[    31.120] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event2"
[    31.120] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[    31.120] (**) Option "xkb_model" "microsoftpro"
[    31.120] (**) Option "xkb_layout" "is"
[    31.120] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.122] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    31.123] (II) event2  - Video Bus: device is a keyboard
[    31.124] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[    31.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.124] (**) Power Button: Applying InputClass "system-keyboard"
[    31.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.124] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[    31.124] (II) Using input driver 'libinput' for 'Power Button'
[    31.124] (**) Power Button: always reports core events
[    31.124] (**) Option "Device" "/dev/input/event3"
[    31.124] (**) Option "_source" "server/udev"
[    31.126] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    31.126] (II) event3  - Power Button: device is a keyboard
[    31.126] (II) event3  - Power Button: device removed
[    31.148] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10/event3"
[    31.148] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[    31.148] (**) Option "xkb_model" "microsoftpro"
[    31.148] (**) Option "xkb_layout" "is"
[    31.148] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.150] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    31.150] (II) event3  - Power Button: device is a keyboard
[    31.151] (II) config/udev: Adding input device Lid Switch
(/dev/input/event5)
[    31.152] (II) No input driver specified, ignoring this device.
[    31.152] (II) This device may have been added with another device file.
[    31.153] (II) config/udev: Adding input device Sleep Button
(/dev/input/event4)
[    31.153] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.153] (**) Sleep Button: Applying InputClass "system-keyboard"
[    31.153] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.153] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[    31.153] (II) Using input driver 'libinput' for 'Sleep Button'
[    31.153] (**) Sleep Button: always reports core events
[    31.153] (**) Option "Device" "/dev/input/event4"
[    31.153] (**) Option "_source" "server/udev"
[    31.155] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[    31.155] (II) event4  - Sleep Button: device is a keyboard
[    31.155] (II) event4  - Sleep Button: device removed
[    31.172] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11/event4"
[    31.172] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 9)
[    31.172] (**) Option "xkb_model" "microsoftpro"
[    31.172] (**) Option "xkb_layout" "is"
[    31.172] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.174] (II) event4  - Sleep Button: is tagged by udev as: Keyboard
[    31.174] (II) event4  - Sleep Button: device is a keyboard
[    31.177] (II) config/udev: Adding input device Chicony USB2.0 Camera:
Chicony  (/dev/input/event12)
[    31.177] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass "evdev
keyboard catchall"
[    31.177] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass
"system-keyboard"
[    31.177] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass "evdev
keyboard catchall"
[    31.177] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass
"libinput keyboard catchall"
[    31.177] (II) Using input driver 'libinput' for 'Chicony USB2.0 Camera:
Chicony '
[    31.177] (**) Chicony USB2.0 Camera: Chicony : always reports core events
[    31.177] (**) Option "Device" "/dev/input/event12"
[    31.177] (**) Option "_source" "server/udev"
[    31.180] (II) event12 - Chicony USB2.0 Camera: Chicony : is tagged by udev
as: Keyboard
[    31.180] (II) event12 - Chicony USB2.0 Camera: Chicony : device is a
keyboard
[    31.180] (II) event12 - Chicony USB2.0 Camera: Chicony : device removed
[    31.216] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event12"
[    31.216] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera:
Chicony " (type: KEYBOARD, id 10)
[    31.216] (**) Option "xkb_model" "microsoftpro"
[    31.216] (**) Option "xkb_layout" "is"
[    31.216] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.219] (II) event12 - Chicony USB2.0 Camera: Chicony : is tagged by udev
as: Keyboard
[    31.219] (II) event12 - Chicony USB2.0 Camera: Chicony : device is a
keyboard
[    31.221] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[    31.221] (II) No input driver specified, ignoring this device.
[    31.221] (II) This device may have been added with another device file.
[    31.222] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event9)
[    31.222] (II) No input driver specified, ignoring this device.
[    31.222] (II) This device may have been added with another device file.
[    31.223] (II) config/udev: Adding input device HDA Intel PCH Front
Headphone (/dev/input/event10)
[    31.223] (II) No input driver specified, ignoring this device.
[    31.223] (II) This device may have been added with another device file.
[    31.224] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3
(/dev/input/event11)
[    31.224] (II) No input driver specified, ignoring this device.
[    31.224] (II) This device may have been added with another device file.
[    31.226] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[    31.226] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[    31.226] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-keyboard"
[    31.226] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[    31.226] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput
keyboard catchall"
[    31.226] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[    31.226] (**) AT Translated Set 2 keyboard: always reports core events
[    31.226] (**) Option "Device" "/dev/input/event0"
[    31.226] (**) Option "_source" "server/udev"
[    31.229] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as:
Keyboard
[    31.229] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    31.230] (II) event0  - AT Translated Set 2 keyboard: device removed
[    31.248] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.248] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 11)
[    31.248] (**) Option "xkb_model" "microsoftpro"
[    31.248] (**) Option "xkb_layout" "is"
[    31.248] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    31.251] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as:
Keyboard
[    31.251] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    31.253] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event1)
[    31.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[    31.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[    31.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput
touchpad catchall"
[    31.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[    31.253] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default
clickpad buttons"
[    31.253] (II) LoadModule: "synaptics"
[    31.254] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[    31.255] (II) Module synaptics: vendor="X.Org Foundation"
[    31.255]    compiled for 1.20.3, module version = 1.9.1
[    31.255]    Module class: X.Org XInput Driver
[    31.255]    ABI class: X.Org XInput driver, version 24.1
[    31.255] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[    31.255] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.255] (**) Option "Device" "/dev/input/event1"
[    31.288] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events
for semi-multitouch device
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 -
5692 (res 66)
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 -
4680 (res 102)
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 -
15
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
double triple
[    31.288] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.288] (**) Option "HorizEdgeScroll" "off"
[    31.288] (**) Option "TapButton1" "1"
[    31.288] (**) Option "TapButton2" "3"
[    31.289] (**) Option "TapButton3" "2"
[    31.289] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.289] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.324] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input6/event1"
[    31.324] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 12)
[    31.324] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is
now constant deceleration 2.5
[    31.324] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is
now 1.75
[    31.324] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is
now 0.037
[    31.324] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[    31.325] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.325] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[    31.325] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.325] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.326] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[    31.326] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass
"touchpad ignore duplicates"
[    31.327] (II) config/udev: Adding input device PC Speaker
(/dev/input/event7)
[    31.327] (II) No input driver specified, ignoring this device.
[    31.327] (II) This device may have been added with another device file.
[    31.353] (EE) modeset(0): failed to set mode: Invalid argument
[    31.362] (EE) Failed to open authorization file
"/run/sddm/{782fb0ce-4332-41fa-b48c-d14a853130fc}": No such file or directory
linux-0xvp:/var/log #


You are receiving this mail because: