Comment # 3 on bug 975881 from Jean-Claude Dole

While trying x86 driver, I have to keep x86_64 version of
kipi-plugins-acquireimage and libksane0 because changing to 32 bits need to
change many other things.
I installed the 32 bits scanner driver.
I still have a warning that the driver may failed on 64 bits system.
It does not work.

# lsusb
Bus 002 Device 004: ID 04b8:0130 Seiko Epson Corp. GT-X770 [Perfection V500]

OK

# sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.24

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

found USB scanner (vendor=0x04b8 [EPSON], product=0x0130 [EPSON Scanner]) at
libusb:002:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done

OK

# scanimage -L
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner
device `epkowa:interpreter:002:004' is a Epson (unknown model) flatbed scanner

OK

# scanimage -vvv -T
scanimage: open of device epkowa:interpreter:002:004 failed: Invalid argument
Calling sane_exit
scanimage: finished