User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML,
like Gecko) Chrome/94.0.4606.71 Safari/537.36
Build Identifier:
The driver doesn't seem to load. I've included some of the console output below
(OCR from a photo). It is the same with both the network and offline ISOs. The
problem only started happening in recent ISOs (maybe since 5.14?) as it has
worked fine in the past.
After installing via a USB Ethernet adapter or with the offline ISO, when
rebooting into the system, the WiFi works OK.
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
cryptd: max_cpu_qlen set to 1000
iwlwifi 0100:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-64.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-63.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-62.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-61.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-60,ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-59.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-58.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-57.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-56.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-55.ucode
failed with error -2
iwlwifi 0000'00:14.3: Direct firmware load for iwlwifilu-c0-hr-b0-54.ucode
failed with error -2
iwlwifi 0000.00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-53.ucode
failed with error -2
iwlwifi 0000:00:14.3:4Direct firmware load for iwlwifi-Qu-c0-hr-b0-52.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-51.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi.-Qu-c0-hr-b0-50.ucode
failed with error -2
Multi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-49.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-48.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-47.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-46.ucode
failed with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-45.ucode
failed with error -2
Whiff' 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-44.ucode
failed with error -2
Multi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-43.ucode
failed with error -2
MOH 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-42.ucode failed
with error -2
iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-41.ucode
failed with error -2
iwlwifi 0800:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-40.ucode
failed with error -2
Multi 0000:00:14.3: Direct firmware load for iwlwifi-Qu-c0-hr-b0-39.ucode
failed with error -2
iwlwifi 0000:00:14.3: no suitable firmware found!
iwlwifi 0000:00:14.3: minimum version required: iwlwifi-Qu-c0-hr-b0-39
iwlwifi 0000:00:14.3: maximum version supported: iwlwifilu-c0-hr-b0-64
iwlwifi 0000:00:14.3: check
Reproducible: Always
Steps to Reproduce:
1.boot installer ISO from USB drive
2.installer prompts user for location of repos because there are no network
conections
Actual Results:
unable to install due to no network
Expected Results:
Should work fine, has worked fine in the past