Comment # 34
on bug 1189841
from Michal Suchanek
s390vsl205:~/:[0]# KERNEL_PACKAGE_SCRIPT_DEBUG=1 zypper in
kernel-default-extra-5.3.18-108.1.gdd7ca9f
dlm-kmp-default-5.3.18-108.1.gdd7ca9f hello-kmp-default suse-module-tools
Loading repository data...
Reading installed packages...
'suse-module-tools' is already installed.
No update candidate for 'suse-module-tools-16.0.9+3-157.1.s390x'. The highest
available version is already installed.
Resolving package dependencies...
The following 5 NEW packages are going to be installed:
dlm-kmp-default-5.3.18-108.1.gdd7ca9f hello-kmp-default hello-ueficert
kernel-default-5.3.18-108.1.gdd7ca9f
kernel-default-extra-5.3.18-108.1.gdd7ca9f
The following 5 packages have no support information from their vendor:
dlm-kmp-default-5.3.18-108.1.gdd7ca9f hello-kmp-default hello-ueficert
kernel-default-5.3.18-108.1.gdd7ca9f
kernel-default-extra-5.3.18-108.1.gdd7ca9f
The following package requires a system reboot:
kernel-default-5.3.18-108.1.gdd7ca9f
5 new packages to install.
Overall download size: 44.3 MiB. Already cached: 0 B. After the operation,
additional 52.8 MiB will be used.
Note: System reboot required.
Continue? [y/n/v/...? shows all options] (y):
Retrieving package hello-ueficert-1.0-14.3.s390x
(1/5), 8.4 KiB ( 880 B unpacked)
Retrieving: hello-ueficert-1.0-14.3.s390x.rpm
...........................................................................[done
(3.3 KiB/s)]
Retrieving package kernel-default-5.3.18-108.1.gdd7ca9f.s390x
(2/5), 31.3 MiB ( 51.5 MiB unpacked)
Retrieving: kernel-default-5.3.18-108.1.gdd7ca9f.s390x.rpm
.............................................................[done (51.5
MiB/s)]
Retrieving package kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x
(3/5), 7.1 MiB ( 1.2 MiB unpacked)
Retrieving: kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x.rpm
....................................................................[done]
Retrieving package hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x
(4/5), 10.6 KiB ( 5.6 KiB unpacked)
Retrieving: hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x.rpm
...............................................................[done]
Retrieving package dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x
(5/5), 5.9 MiB ( 68.9 KiB unpacked)
Retrieving: dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x.rpm
.........................................................................[done]
Checking for file conflicts:
........................................................................................................[done]
(1/5) Installing: hello-ueficert-1.0-14.3.s390x
.....................................................................................[done]
Additional rpm output:
cert pre ca-check: certs: 3559CCE2 -- 1
cert post ca-check: certs: 3559CCE2 -- 1
(2/5) Installing: kernel-default-5.3.18-108.1.gdd7ca9f.s390x
........................................................................[done]
Additional rpm output:
pre name: kernel-default version: 5.3.18 release: 108.1.gdd7ca9f kernelrelease:
5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0 image: image certs:
3559CCE2 -- 2
cert pre ca-check: 1 certs: 3559CCE2 -- 2
post name: kernel-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
Triggering purge-kernels
wm2 --add-kernel 5.3.18-108.gdd7ca9f-default
dracut: Executing: /usr/bin/dracut -f /boot/initrd-5.3.18-108.gdd7ca9f-default
5.3.18-108.gdd7ca9f-default
dracut: dracut module 'dmraid' will not be installed, because command 'dmraid'
could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm'
could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid'
could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command
'biosdevname' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command 'dmraid'
could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm'
could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid'
could not be found!
dracut: *** Including module: bash ***
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: cio_ignore ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: zipl ***
dracut: *** Including module: dasd_mod ***
dracut: *** Including module: dasd_rules ***
dracut: Skipping udev rule: /etc/udev/rules.d/51-dasd-*.rules
dracut: *** Including module: dcssblk ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: zdev ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: haveged ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: grub2 ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: *** Hardlinking files done ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut: rd.cio_accept=0.0.0800,0.0.0801,0.0.0802,0.0.0150
dracut: rd.zipl=/dev/disk/by-path/ccw-0.0.0150-part1
dracut: rd.dasd=0.0.0150
dracut: resume=/dev/disk/by-path/ccw-0.0.0150-part2
dracut: root=/dev/disk/by-path/ccw-0.0.0150-part3 rootfstype=btrfs
rootflags=rw,relatime,ssd,space_cache,subvolid=266,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot
dracut: *** Creating image file '/boot/initrd-5.3.18-108.gdd7ca9f-default' ***
dracut: *** Creating initramfs image file
'/boot/initrd-5.3.18-108.gdd7ca9f-default' done ***
cert post ca-check: 1 certs: 3559CCE2 -- 2
(3/5) Installing: kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x
..................................................................[done]
Additional rpm output:
KMP pre name: kernel-default-extra version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
KMP post name: kernel-default-extra version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
wm2 --add-kernel-modules 5.3.18-108.gdd7ca9f-default
(4/5) Installing: hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x
.............................................................[done]
Additional rpm output:
KMP pre name: hello-kmp-default version: 1.0_k5.3.18_107.g59a73dd release: 14.3
kernelrelease: 5.3.18-107.g59a73dd flavor: default usrmerged: 0 --
KMP post name: hello-kmp-default version: 1.0_k5.3.18_107.g59a73dd release:
14.3 kernelrelease: 5.3.18-107.g59a73dd flavor: default usrmerged: 0 --
wm2 --add-kmp hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3
(5/5) Installing: dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x
.......................................................................[done]
Additional rpm output:
KMP pre name: dlm-kmp-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
KMP post name: dlm-kmp-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
wm2 --add-kernel-modules 5.3.18-108.gdd7ca9f-default
Executing %posttrans script 'hello-ueficert-1.0-14.3.s390x.rpm'
------------------------------------------------------------------------[/]
Output of hello-ueficert-1.0-14.3.s390x.rpm %posttrans script:
cert posttrans ca-check: certs: 3559CCE2 -- 1
Executing %posttrans script 'kernel-default-5.3.18-108.1.gdd7ca9f.s390x.rpm'
......<20%>================================================[/]
Output of kernel-default-5.3.18-108.1.gdd7ca9f.s390x.rpm %posttrans script:
posttrans name: kernel-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
Executing %posttrans script
'kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x.rpm'
................<40%>================================[-]
Output of kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x.rpm %posttrans
script:
KMP posttrans name: kernel-default-extra version: 5.3.18 release:
108.1.gdd7ca9f kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant:
usrmerged: 0 image: image certs: 3559CCE2 -- 2
dracut: Executing: /usr/bin/dracut --kver=5.3.18-107.g59a73dd-default -f
dracut: dracut module 'dmraid' will not be installed, because command
'dmraid' could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsid' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command
'biosdevname' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command
'dmraid' could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsid' could not be found!
dracut: *** Including module: bash ***
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: cio_ignore ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: zipl ***
dracut: *** Including module: dasd_mod ***
dracut: *** Including module: dasd_rules ***
dracut: Skipping udev rule: /etc/udev/rules.d/51-dasd-*.rules
dracut: *** Including module: dcssblk ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: zdev ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: haveged ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: grub2 ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: *** Hardlinking files done ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut: rd.cio_accept=0.0.0800,0.0.0801,0.0.0802,0.0.0150
dracut: rd.zipl=/dev/disk/by-path/ccw-0.0.0150-part1
dracut: rd.dasd=0.0.0150
dracut: resume=/dev/disk/by-path/ccw-0.0.0150-part2
dracut: root=/dev/disk/by-path/ccw-0.0.0150-part3 rootfstype=btrfs
rootflags=rw,relatime,ssd,space_cache,subvolid=266,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot
dracut: *** Creating image file '/boot/initrd-5.3.18-107.g59a73dd-default'
***
dracut: *** Creating initramfs image file
'/boot/initrd-5.3.18-107.g59a73dd-default' done ***
dracut: Executing: /usr/bin/dracut --kver=5.3.18-108.gdd7ca9f-default -f
dracut: dracut module 'dmraid' will not be installed, because command
'dmraid' could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsid' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command
'biosdevname' could not be found!
dracut: dracut module 'dmraid' will not be installed, because command
'dmraid' could not be found!
dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because
command 'ntfs-3g' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command
'iscsid' could not be found!
dracut: *** Including module: bash ***
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: drm ***
dracut: *** Including module: plymouth ***
dracut: *** Including module: cio_ignore ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: zipl ***
dracut: *** Including module: dasd_mod ***
dracut: *** Including module: dasd_rules ***
dracut: Skipping udev rule: /etc/udev/rules.d/51-dasd-*.rules
dracut: *** Including module: dcssblk ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: suse-btrfs ***
dracut: *** Including module: suse-xfs ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: zdev ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: haveged ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: grub2 ***
dracut: *** Including module: shutdown ***
dracut: *** Including module: suse ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: *** Hardlinking files done ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Store current command line parameters ***
dracut: Stored kernel commandline:
dracut: rd.cio_accept=0.0.0800,0.0.0801,0.0.0802,0.0.0150
dracut: rd.zipl=/dev/disk/by-path/ccw-0.0.0150-part1
dracut: rd.dasd=0.0.0150
dracut: resume=/dev/disk/by-path/ccw-0.0.0150-part2
dracut: root=/dev/disk/by-path/ccw-0.0.0150-part3 rootfstype=btrfs
rootflags=rw,relatime,ssd,space_cache,subvolid=266,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot
dracut: *** Creating image file '/boot/initrd-5.3.18-108.gdd7ca9f-default'
***
dracut: *** Creating initramfs image file
'/boot/initrd-5.3.18-108.gdd7ca9f-default' done ***
Executing %posttrans script
'hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x.rpm'
.......................<60%>====================[\]
Output of hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x.rpm %posttrans
script:
KMP posttrans name: hello-kmp-default version: 1.0_k5.3.18_107.g59a73dd
release: 14.3 kernelrelease: 5.3.18-107.g59a73dd flavor: default usrmerged: 0
--
Executing %posttrans script 'dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x.rpm'
.........................................<80%>============[|]
Output of dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x.rpm %posttrans script:
KMP posttrans name: dlm-kmp-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 2
Executing %posttrans scripts
........................................................................................................[done]
s390vsl205:~/:[0]# KERNEL_PACKAGE_SCRIPT_DEBUG=1 zypper rm -u
kernel-default-5.3.18-108.1.gdd7ca9f hello-kmp-default
Reading installed packages...
Resolving package dependencies...
The following 5 packages are going to be REMOVED:
dlm-kmp-default-5.3.18-108.1.gdd7ca9f hello-kmp-default hello-ueficert
kernel-default-5.3.18-108.1.gdd7ca9f
kernel-default-extra-5.3.18-108.1.gdd7ca9f
5 packages to remove.
After the operation, 52.8 MiB will be freed.
Continue? [y/n/v/...? shows all options] (y):
(1/5) Removing dlm-kmp-default-5.3.18-108.1.gdd7ca9f.s390x
..........................................................................[done]
Additional rpm output:
KMP preun name: dlm-kmp-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
KMP postun name: dlm-kmp-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
(2/5) Removing hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3.s390x
................................................................[done]
Additional rpm output:
KMP preun name: hello-kmp-default version: 1.0_k5.3.18_107.g59a73dd release:
14.3 kernelrelease: 5.3.18-107.g59a73dd flavor: default usrmerged: 0 --
KMP postun name: hello-kmp-default version: 1.0_k5.3.18_107.g59a73dd release:
14.3 kernelrelease: 5.3.18-107.g59a73dd flavor: default usrmerged: 0 --
wm2 --remove-kmp hello-kmp-default-1.0_k5.3.18_107.g59a73dd-14.3
(3/5) Removing kernel-default-extra-5.3.18-108.1.gdd7ca9f.s390x
.....................................................................[done]
Additional rpm output:
KMP preun name: kernel-default-extra version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
KMP postun name: kernel-default-extra version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
(4/5) Removing hello-ueficert-1.0-14.3.s390x
........................................................................................[done]
Additional rpm output:
cert preun ca-check: certs: 3559CCE2 -- 0
cert postun ca-check: certs: 3559CCE2 -- 0
(5/5) Removing kernel-default-5.3.18-108.1.gdd7ca9f.s390x
...........................................................................[done]
Additional rpm output:
preun name: kernel-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
cert preun ca-check: 1 certs: 3559CCE2 -- 1
postun name: kernel-default version: 5.3.18 release: 108.1.gdd7ca9f
kernelrelease: 5.3.18-108.gdd7ca9f flavor: default variant: usrmerged: 0
image: image certs: 3559CCE2 -- 1
Disarming purge-kernels
wm2 --remove-kernel 5.3.18-108.gdd7ca9f-default
cert postun ca-check: 1 certs: 3559CCE2 -- 1
Core libraries or services have been updated.
Reboot is required to ensure that your system benefits from these updates.