Comment # 18
on bug 1028966
from Richard Palethorpe
I am still suffering random crashes in 4.10.12-1 Tumbleweed. I am not sure
whether you are saying it is only fixed in 4.11.
DMESG log from most recent crash:
[May10 11:03] ------------[ cut here ]------------
[ +0.000027] WARNING: CPU: 3 PID: 0 at ../net/sched/sch_generic.c:316
dev_watchdog+0x229/0x230
[ +0.000005] NETDEV WATCHDOG: enp62s0u1u2 (r8152): transmit queue 0 timed out
[ +0.000004] Modules linked in: binfmt_misc dm_mod iscsi_ibft iscsi_boot_sysfs
xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat
nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack
ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ebtable_filter ebtables
ip6table_filter ip6_tables iptable_filter ip_tables x_tables fuse af_packet
cdc_ether usbnet snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device r8152
mii msr uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2
videobuf2_core videodev btusb btrtl hid_multitouch nls_iso8859_1 nls_cp437 vfat
fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel
snd_hda_codec_hdmi xfs dell_rbtn libcrc32c dell_laptop kvm iTCO_wdt dell_led
i2c_designware_platform dell_wmi arc4 irqbypass
[ +0.000067] mei_wdt iTCO_vendor_support i2c_designware_core dell_smbios
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek pcbc
dcdbas snd_hda_codec_generic dell_smm_hwmon iwlmvm intel_hid sparse_keymap
joydev mac80211 snd_hda_intel snd_hda_codec snd_hda_core aesni_intel snd_hwdep
idma64 snd_pcm rtsx_pci_ms aes_x86_64 crypto_simd iwlwifi glue_helper snd_timer
pcspkr virt_dma i2c_i801 cryptd snd soundcore memstick cfg80211 mei_me hci_uart
mei btbcm thermal btqca intel_pch_thermal intel_lpss_pci btintel fan
processor_thermal_device intel_soc_dts_iosf bluetooth rfkill int3403_thermal
dell_smo8800 acpi_als pinctrl_sunrisepoint kfifo_buf pinctrl_intel industrialio
tpm_tis tpm_tis_core int3402_thermal intel_lpss_acpi intel_lpss tpm
int340x_thermal_zone shpchp fjes int3400_thermal
[ +0.000065] acpi_pad battery acpi_thermal_rel ac btrfs xor hid_generic
usbhid raid6_pq rtsx_pci_sdmmc mmc_core nouveau mxm_wmi ttm i915 i2c_algo_bit
crc32c_intel drm_kms_helper syscopyarea xhci_pci sysfillrect sysimgblt
serio_raw fb_sys_fops rtsx_pci xhci_hcd mfd_core usbcore drm i2c_hid wmi video
button sg efivarfs
[ +0.000036] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.10.12-1-default #1
[ +0.000003] Hardware name: Dell Inc. Precision 5510/0N8J4R, BIOS 01.02.00
04/07/2016
[ +0.000002] Call Trace:
[ +0.000021] <IRQ>
[ +0.000012] dump_stack+0x5c/0x7a
[ +0.000008] __warn+0xbe/0xe0
[ +0.000010] warn_slowpath_fmt+0x4f/0x60
[ +0.000011] ? enqueue_task_fair+0x84/0x680
[ +0.000006] dev_watchdog+0x229/0x230
[ +0.000008] ? qdisc_rcu_free+0x40/0x40
[ +0.000004] ? qdisc_rcu_free+0x40/0x40
[ +0.000007] call_timer_fn+0x2e/0x160
[ +0.000006] ? qdisc_rcu_free+0x40/0x40
[ +0.000006] run_timer_softirq+0x223/0x4c0
[ +0.000009] ? tick_sched_handle.isra.15+0x20/0x50
[ +0.000004] ? tick_sched_timer+0x38/0x70
[ +0.000005] __do_softirq+0x105/0x2e5
[ +0.000008] irq_exit+0xae/0xb0
[ +0.000006] smp_apic_timer_interrupt+0x39/0x50
[ +0.000006] apic_timer_interrupt+0x82/0x90
[ +0.000003] </IRQ>
[ +0.000006] ? cpuidle_enter_state+0x11a/0x2e0
[ +0.000004] ? cpuidle_enter_state+0x107/0x2e0
[ +0.000005] ? do_idle+0x17a/0x1f0
[ +0.000004] ? cpu_startup_entry+0x5d/0x60
[ +0.000006] ? start_secondary+0x144/0x170
[ +0.000004] ? start_cpu+0x14/0x14
[ +0.000005] ---[ end trace 932bf4f661e7ad08 ]---
[ +0.000008] r8152 4-1.2:1.0 enp62s0u1u2: Tx timeout
[ +1.035551] irq 16: nobody cared (try booting with the "irqpoll" option)
[ +0.000003] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G W
4.10.12-1-default #1
[ +0.000001] Hardware name: Dell Inc. Precision 5510/0N8J4R, BIOS 01.02.00
04/07/2016
[ +0.000001] Call Trace:
[ +0.000006] <IRQ>
[ +0.000004] dump_stack+0x5c/0x7a
[ +0.000002] __report_bad_irq+0x30/0xc0
[ +0.000002] note_interrupt+0x23b/0x280
[ +0.000003] handle_irq_event_percpu+0x41/0x50
[ +0.000002] handle_irq_event+0x37/0x60
[ +0.000002] handle_fasteoi_irq+0x9d/0x170
[ +0.000005] handle_irq+0x19/0x30
[ +0.000002] do_IRQ+0x41/0xc0
[ +0.000002] common_interrupt+0x82/0x82
[ +0.000001] </IRQ>
[ +0.000002] ? cpuidle_enter_state+0x11a/0x2e0
[ +0.000001] ? cpuidle_enter_state+0x107/0x2e0
[ +0.000001] ? do_idle+0x17a/0x1f0
[ +0.000001] ? cpu_startup_entry+0x5d/0x60
[ +0.000002] ? start_secondary+0x144/0x170
[ +0.000001] ? start_cpu+0x14/0x14
[ +0.000001] handlers:
[ +0.000003] [<ffffffffc0b9a910>] idma64_irq [idma64]
[ +0.000001] [<ffffffffc0b43b20>] i801_isr [i2c_i801]
[ +0.000002] [<ffffffffc083f140>] i2c_dw_isr [i2c_designware_core]
[ +0.000001] Disabling IRQ #16
[ +4.083989] xhci_hcd 0000:3e:00.0: xHCI host not responding to stop endpoint
command.
[ +0.000009] xhci_hcd 0000:3e:00.0: Assuming host is dying, halting host.
[ +0.000093] r8152 4-1.2:1.0 enp62s0u1u2: Tx status -108
[ +0.000008] r8152 4-1.2:1.0 enp62s0u1u2: Tx status -108
[ +0.000005] r8152 4-1.2:1.0 enp62s0u1u2: Tx status -108
[ +0.000006] r8152 4-1.2:1.0 enp62s0u1u2: Tx status -108
[ +0.000044] xhci_hcd 0000:3e:00.0: HC died; cleaning up
[ +0.000022] r8152 4-1.2:1.0 enp62s0u1u2: Tx timeout
[ +0.000062] usb 3-1: USB disconnect, device number 2
[ +0.000006] usb 3-1.5: USB disconnect, device number 3
[ +0.000318] usb 4-1: USB disconnect, device number 2
[ +0.000008] usb 4-1.2: USB disconnect, device number 3
[ +0.000982] usb 3-1.6: USB disconnect, device number 4