To @Nikolai
In the BIOS Advanced > System Agent (SA) Configuration > Graphics Configuration
> Primary Display > 'Auto' was selected. The other options were 'CPU Graphics',
'PEG', 'PCIE' and I changed it to 'PEG'.
Advanced > System Agent (SA) Configuration > Graphics Configuration > iGPU
Multi-Monitor is already set to 'Disabled'. I rebooted the system with monitor
OFF and got the same result with DP NO Signal when monitor was turned on.
sudo inxi -aSCGImz
System: Kernel: 5.3.18-59.34-default x86_64 bits: 64 compiler: gcc v: 7.5.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.3.18-59.34-default
root=UUID=843c52a9-20ba-4694-abc3-a3988c2c354a
splash=silent
resume=/dev/disk/by-uuid/295c1286-73fd-42fa-9f7a-21fa1103e118 mitigations=auto
quiet
Console: tty 1 dm: SDDM Distro: openSUSE Leap 15.3
Memory: RAM: total: 15.53 GiB used: 733.7 MiB (4.6%)
Array-1: capacity: 64 GiB slots: 4 EC: None max module size: 16 GiB
note: est.
Device-1: ChannelA-DIMM1 size: No Module Installed
Device-2: ChannelA-DIMM2 size: 8 GiB speed: 2133 MT/s type: DDR4
detail: synchronous bus width: 64 bits
total: 64 bits manufacturer: G-Skill part-no: F4-3000C16-8GISB
serial: N/A
Device-3: ChannelB-DIMM1 size: No Module Installed
Device-4: ChannelB-DIMM2 size: 8 GiB speed: 2133 MT/s type: DDR4
detail: synchronous bus width: 64 bits
total: 64 bits manufacturer: G-Skill part-no: F4-3000C16-8GISB
serial: N/A
CPU: Topology: 8-Core model: Intel Core i7-10700K bits: 64 type: MT MCP
arch: N/A family: 6 model-id: A5 (165)
stepping: 5 microcode: EC L1 cache: 512 KiB L2 cache: 16.0 MiB L3
cache: 16.0 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 121596
Speed: 800 MHz min/max: 800/5100 MHz Core speeds (MHz): 1: 800 2:
800 3: 800 4: 800 5: 801 6: 800 7: 800 8: 800
9: 801 10: 800 11: 800 12: 800 13: 800 14: 800 15: 800 16: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass
disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user
pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Navi 21 [Radeon RX
6800/6800 XT / 6900 XT] vendor: Tul driver: amdgpu
v: kernel bus ID: 04:00.0 chip ID: 1002:73bf
Display: server: X.org 1.20.3 compositor: kwin_x11 driver:
amdgpu,ati unloaded: fbdev,modesetting,radeon,vesa
tty: 208x57
Message: Advanced graphics data unavailable in console for root.
Info: Processes: 338 Uptime: N/A Init: systemd v: 246 runlevel: 5 target:
graphical.target Compilers: gcc: N/A
Shell: bash (sudo) v: 4.4.23 running in: tty 1 (SSH) inxi: 3.1.00