July 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 827480] New: openSUSE:Tools: Bug
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=827480 https://bugzilla.novell.com/show_bug.cgi?id=827480#c0 Summary: openSUSE:Tools: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: 3rd party software AssignedTo: adrian(a)suse.com ReportedBy: Rene.vanPaassen(a)gmail.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Other Blocker: No obs-service-source_validator.noarch 0:0.3-43.1 doesn't install on Fedora for lack of gpg2, which is called gnupg2 on Fedora To be solved by: %if 0%{?fedora_version} Substitute: gpg2 gnupg2 %endif in the meta file -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 625552] New: openssh: inprove recommendation in "REMOTE HOST IDENTIFICATION HAS CHANGED" message
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=625552 http://bugzilla.novell.com/show_bug.cgi?id=625552#c0 Summary: openssh: inprove recommendation in "REMOTE HOST IDENTIFICATION HAS CHANGED" message Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: anicka(a)novell.com ReportedBy: sbrabec(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- When remote host identification changes, following message appears: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is ................ Please contact your system administrator. Add correct host key in /home/sbrabec/.ssh/known_hosts to get rid of this message. Offending key in /home/sbrabec/.ssh/known_hosts:1 RSA host key for ben has changed and you have requested strict checking. Host key verification failed. Following the message and opened known_hosts file, I found just an ASCII noise. Well, I tried to delete line 1 (guessing from the error message) and got this message: The authenticity of host 'foo (...)' can't be established. RSA key fingerprint is ............ Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'foo' (RSA) to the list of known hosts. Warning: the RSA host key for foo' differs from the key for the IP address '...' Offending key for IP in /home/sbrabec/.ssh/known_hosts:1 Are you sure you want to continue connecting (yes/no)? yes It would be nice to change the messsage and offer ssh-keygen -R or so. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 776058] New: Go language - go get/install fails with permission denied
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=776058 https://bugzilla.novell.com/show_bug.cgi?id=776058#c0 Summary: Go language - go get/install fails with permission denied Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: openSUSE 12.1 Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: graham(a)andtech.eu QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1226.0 Safari/537.4 SUSE/22.0.1226.0 With the Go 1.0.2 update, as a non priveleged user using the 'go' toolchain command to get/install a third party package from an SCM repo may fail with the message: go install runtime: open /usr/lib64/go/pkg/linux_amd64/runtime.a: permission denied The go build command somehow thinks the runtime .a archive is older than the runtime package source and so tries to rebuild the runtime package for linking. Known workarounds: 1. Pass the openSUSE specific -s flag to 'go get', 'go build' e.g. go get -s example.com/package 2. Update the file time on the runtime .a archive, as root do: find /usr/lib64/go/pkg -type f -exec touch {} + Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 909912] New: install with encrypted partition lacks timeout parameter
by bugzilla_noreply＠novell.com 19 Dec '19

19 Dec '19

http://bugzilla.suse.com/show_bug.cgi?id=909912 Bug ID: 909912 Summary: install with encrypted partition lacks timeout parameter Classification: openSUSE Product: openSUSE Factory Version: 201412* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: ohering(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 617054 --> http://bugzilla.suse.com/attachment.cgi?id=617054&action=edit boot-failure-1.jpg A fresh install which includes an encrypted partition does not include a timeout= parameter in crypttab (Not sure if thats the actual cause here!). The result is that one is FORCED to pay attention to the boot process to quickly enter the passphrase. Otherwise the user is presented with a black screen and geeky output. I wonder what the value is to not just sit there and wait forever for a passphrase, instead of enter failing state as its done now... If one grabs a translator to decode whats printend on the screen, ctrl D will not actually help. It asks for the password for a few seconds, then the bootsplash is started again. Nothing happens during that time. After a while the same geek screen is shown. -- You are receiving this mail because: You are on the CC list for the bug.

1 46

[Bug 931168] New: dia documentation partially in wrong directory (+ broken symlinks)
by bugzilla_noreply＠novell.com 10 Dec '19

10 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=931168 Bug ID: 931168 Summary: dia documentation partially in wrong directory (+ broken symlinks) Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: suse-beta(a)cboltz.de QA Contact: qa-bugs(a)suse.de Found By: Beta-Customer Blocker: --- Besides the (correct) /usr/share/doc/packages/dia/ directory, there's also /usr/share/doc/dia/ (note the missing "packages" segment) which contains some $LANG/examples/*.dtd files. Also, /usr/share/doc/dia/html/ contains symlinks pointing to non-existing directories. Please move everything to /usr/share/doc/packages/dia/ and fix the html/* symlinks. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 851982] New: unable to install ibus due to libreoffice conflict
by bugzilla_noreply＠novell.com 10 Dec '19

10 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=851982 https://bugzilla.novell.com/show_bug.cgi?id=851982#c0 Summary: unable to install ibus due to libreoffice conflict Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: mrkfbrn(a)yahoo.co.nz QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 Am unable to install ibus due to a conflict with Libreoffice KDE integration. conflict message from yast is "ibus 1.5.4.4.1.x86_64 conflicts with libreoffice-kde4 provided by libreoffice-kde4-4.1.3.2-4.2.x86_64" Yast provides no option to ignore the conflict. ibus is required for Japanese input so this is a showstopper for me. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 536505] New: rrdtool graph has some problems with vertical auto-scaling
by bugzilla_noreply＠novell.com 09 Dec '19

09 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=536505 Summary: rrdtool graph has some problems with vertical auto-scaling Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: SLES 10 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: qa(a)suse.de Found By: --- Created an attachment (id=316589) --> (http://bugzilla.novell.com/attachment.cgi?id=316589) Example with --rigid: No y scale displayed User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.21) Gecko/20090410 SUSE/1.1.16-1.1.2 SeaMonkey/1.1.16 (Found in current version of SLES10 SP2, rrdtool-1.2.12-13.2) Specific values (like all between 17.7 and 17.8) cause rrdtool's graph to autoscale the values at a range of 10 to 20, making actual variations practically invisible. There are other intervals where similar problems arise, like [42.0:42.2] where the scale is [40:50]. The --alt-autoscale improves the scaling, but has a problem with not enough numeric labels for the y-axis being shown, just as --rigid does. The author of the tool said the current version is much better regarding those issues. Reproducible: Sometimes Steps to Reproduce: 1. Create graphs with automatic scaling where the values vary a little bit around some undetermined value Actual Results: Some graphs are not good enough to show the variations. Expected Results: The vertical scale should respect the range of values more that it currently does. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 768947] New: purge-kernels does not log to /var/log/zypp/history
by bugzilla_noreply＠novell.com 09 Dec '19

09 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=768947 https://bugzilla.novell.com/show_bug.cgi?id=768947#c0 Summary: purge-kernels does not log to /var/log/zypp/history Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: mmarek(a)suse.com ReportedBy: suse-beta(a)cboltz.de QAContact: qa-bugs(a)suse.de Found By: Beta-Customer Blocker: --- purge-kernels logs to /var/log/messages - but that's a logfile nobody reads when he wants to check the package installation/removal history. /var/log/zypp/history is a much better logfile for this - purge-kernels should write it's removal log there (additional or instead of /var/log/messages). (Yes, I know that purge-kernels calls rpm directly ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 902401] New: plymouth segfault
by bugzilla_noreply＠novell.com 15 Nov '19

15 Nov '19

http://bugzilla.opensuse.org/show_bug.cgi?id=902401 Bug ID: 902401 Summary: plymouth segfault Classification: openSUSE Product: openSUSE Factory Version: NO 13.2 BUGS!! Hardware: i686 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: idonmez(a)suse.com Reporter: mpluskal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- # systemd-coredumpctl gdb 169 TIME PID UID GID SIG EXE Čt 2014-10-23 14:42:07 CEST 169 0 0 11 /usr/sbin/plymouthd GNU gdb (GDB; openSUSE Factory) 7.8 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i586-suse-linux". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://bugs.opensuse.org/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... warning: /etc/gdbinit.d/gdb-heap.py: Adresář nebo soubor neexistuje Reading symbols from /usr/sbin/plymouthd...Reading symbols from /usr/lib/debug/usr/sbin/plymouthd.debug...done. done. [New LWP 169] b[Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/libthread_db.so.1". Core was generated by `@usr/sbin/plymouthd --mode=boot --pid-file=/run/plymouth/pid --attach-to-sessio'. Program terminated with signal SIGSEGV, Segmentation fault. #0 ply_event_loop_stop_watching_signal (loop=0x7665642f, signal_number=signal_number@entry=28) at ply-event-loop.c:869 t869 ply-event-loop.c: Adresář nebo soubor neexistuje. (gdb) bt #0 ply_event_loop_stop_watching_signal (loop=0x7665642f, signal_number=signal_number@entry=28) at ply-event-loop.c:869 #1 0xb76febe7 in ply_terminal_close (terminal=0x99f4008) at ply-terminal.c:707 #2 0xb7717159 in ply_hashtable_foreach (hashtable=0x99f3dc8, func=0xb76feb10 <ply_terminal_close>, user_data=user_data@entry=0x99f3e18) at ply-hashtable.c:272 #3 0xb76fb0fc in ply_close_all_terminals (manager=0x99f3e18) at ply-device-manager.c:954 #4 0x0805396c in quit_splash (state=state@entry=0xbff95794) at main.c:1083 #5 0x08053a4f in dump_details_and_quit_splash (state=state@entry=0xbff95794) at main.c:1114 #6 0x08053ccf in on_quit (state=0xbff95794, retain_splash=false, quit_trigger=0x99f6ac0) at main.c:1349 #7 0x0804ee27 in ply_boot_connection_on_request (connection=0x9a028e0) at ply-boot-server.c:534 #8 0xb7713fc6 in ply_event_loop_handle_met_status_for_source (status=PLY_EVENT_LOOP_FD_STATUS_HAS_DATA, source=0x99f1af0, loop=0x99ef0b0) at ply-event-loop.c:1060 #9 ply_event_loop_process_pending_events (loop=loop@entry=0x99ef0b0) at ply-event-loop.c:1327 #10 0xb7714508 in ply_event_loop_run (loop=0x99ef0b0) at ply-event-loop.c:1359 #11 0x0804c424 in main (argc=4, argv=0xbff95ab4) at main.c:2357 (gdb) bt full #0 ply_event_loop_stop_watching_signal (loop=0x7665642f, signal_number=signal_number@entry=28) at ply-event-loop.c:869 node = 0x19 #1 0xb76febe7 in ply_terminal_close (terminal=0x99f4008) at ply-terminal.c:707 __func__ = "ply_terminal_close" #2 0xb7717159 in ply_hashtable_foreach (hashtable=0x99f3dc8, func=0xb76feb10 <ply_terminal_close>, user_data=user_data@entry=0x99f3e18) at ply-hashtable.c:272 i = 5 #3 0xb76fb0fc in ply_close_all_terminals (manager=0x99f3e18) at ply-device-manager.c:954 No locals. #4 0x0805396c in quit_splash (state=state@entry=0xbff95794) at main.c:1083 __func__ = "quit_splash" #5 0x08053a4f in dump_details_and_quit_splash (state=state@entry=0xbff95794) at main.c:1114 No locals. #6 0x08053ccf in on_quit (state=0xbff95794, retain_splash=false, quit_trigger=0x99f6ac0) at main.c:1349 __func__ = "on_quit" #7 0x0804ee27 in ply_boot_connection_on_request (connection=0x9a028e0) at ply-boot-server.c:534 retain_splash = false quit_trigger = 0x99f6ac0 server = 0x99f1688 command = 0x99f69f8 "Q" argument = 0x99f6b40 "" __PRETTY_FUNCTION__ = "ply_boot_connection_on_request" __func__ = "ply_boot_connection_on_request" #8 0xb7713fc6 in ply_event_loop_handle_met_status_for_source (status=PLY_EVENT_LOOP_FD_STATUS_HAS_DATA, source=0x99f1af0, loop=0x99ef0b0) at ply-event-loop.c:1060 next_node = 0x0 destination = 0x9a02a50 node = <optimized out> #9 ply_event_loop_process_pending_events (loop=loop@entry=0x99ef0b0) at ply-event-loop.c:1327 source = 0x99f1af0 is_disconnected = <optimized out> number_of_received_events = 1 i = 0 events = {{events = 1, data = {ptr = 0x99f1af0, fd = 161422064, u32 = 161422064, u64 = 161422064}}, {events = 4294967295, data = {ptr = 0xffffffff, fd = -1, u32 = 4294967295, u64 = 18446744073709551615}} <repeats 63 times>} __PRETTY_FUNCTION__ = "ply_event_loop_process_pending_events" #10 0xb7714508 in ply_event_loop_run (loop=0x99ef0b0) at ply-event-loop.c:1359 No locals. #11 0x0804c424 in main (argc=4, argv=0xbff95ab4) at main.c:2357 state = {loop = 0x99ef0b0, boot_server = 0x99f1688, boot_splash = 0x0, session = 0x99f27e0, boot_buffer = 0x99f17c8, progress = 0x99f3d60, keystroke_triggers = 0x99ef5e0, entry_triggers = 0x99ef5f0, entry_buffer = 0x99f0660, messages = 0x99f1678, command_parser = 0x99ef008, mode = PLY_MODE_BOOT, local_console_terminal = 0x99f40d8, device_manager = 0x99f3e18, deactivate_trigger = 0x0, quit_trigger = 0x99f6ac0, start_time = 2.9794491600000002, splash_delay = nan(0x8000000000000), kernel_command_line = "BOOT_IMAGE=/boot/vmlinuz-3.17.1-0.g5c4d099-default root=UUID=04f6a8f9-ec8e-4fd8-9d03-9159c16a0a32 resume=/dev/disk/by-id/ata-ST3200827A_5ND4PPCL-part1 splash=silent quiet showopts Y2DEBUG=1\n", '\000' <repeats 321 times>, kernel_command_line_is_set = 1, no_boot_log = 0, showing_details = 1, system_initialized = 1, is_redirected = 0, is_attached = 0, should_be_attached = 1, should_retain_splash = 0, is_inactive = 1, is_shown = 0, should_force_details = 0, override_splash_path = 0x0, system_default_splash_path = 0x99f3e80 "/usr/share/plymouth/themes/openSUSE/openSUSE.plymouth", distribution_default_splash_path = 0x99f3f80 "/usr/share/plymouth/themes/openSUSE/openSUSE.plymouth", default_tty = 0x805641f "/dev/tty7", number_of_errors = 0} exit_code = <optimized out> should_help = false no_boot_log = false no_daemon = false debug = false attach_to_session = true daemon_handle = 0x99ef5a0 mode_string = 0x99ef5a0 " " kernel_command_line = 0x0 tty = 0x0 device_manager_flags = <optimized out> sa = {__sigaction_handler = {sa_handler = 0x80529e0 <dosigaction>, sa_sigaction = 0x80529e0 <dosigaction>}, sa_mask = {__val = {0 <repeats 32 times>}}, sa_flags = -2147483648, sa_restorer = 0x0} __func__ = "main" -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 935864] New: zlib: package minizip?
by bugzilla_noreply＠novell.com 12 Nov '19

12 Nov '19

http://bugzilla.suse.com/show_bug.cgi?id=935864 Bug ID: 935864 Summary: zlib: package minizip? Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: tchvatal(a)suse.com Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de CC: security-team(a)suse.de Found By: --- Blocker: --- zlib contains contrib/minizip which at least by judging from the use of unzip.h is contained as copy in 30 other packages. What about building minizip as separate sub package? -- You are receiving this mail because: You are on the CC list for the bug.

1 12