September 2013 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 814763] New: After changing policy kit permissions for updates to Administrator, Apper still does not require administrator privileges
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=814763 https://bugzilla.novell.com/show_bug.cgi?id=814763#c0 Summary: After changing policy kit permissions for updates to Administrator, Apper still does not require administrator privileges Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: 64bit OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: grglsn765(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:20.0) Gecko/20100101 Firefox/20.0 After changing policy kit permissions for updates to Administrator, Apper still does not require administrator privileges. I do not believe this is a duplicate of Bug 373618, as that fails to complete the update. In this instance, Apper's notification of available updates are approved with a simple click of "ok", and root permissions are not required. In the Actions Policy under System Settings, I went to org.freedesktop followed by The PackageKit Project. There under "update packages" I changed the implicit authorization level of an "Active console" to "Administrator Authentication". My intent was to force apper to ask for my root password before downloading and installing updates, so that some other user that doesn't have administrator privileges cannot complete the update. However, updates are still able to be obtained without asking for root password, as if the Actions Policy under system settings was never changed from a simple "yes". See the following thread in the forums to show that other users have experienced the same thing: http://forums.opensuse.org/english/get-technical-help-here/applications/485… Reproducible: Always Steps to Reproduce: 1. Change policy kit permissions on updates to Administrator Authentication under System Settings 2. Run Apper to find updates 3. Administrator permission (root password) is never asked for as updates are downloaded and installed Actual Results: root password was not asked for, but updates were downloaded and installed Expected Results: because I changed the permissions to Administrator, Apper should have asked for a root password to download and install the updates I believe this affects security, as an administrator could find his computer updated by a regular user. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 802771] New: kde wants to remove hardware
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=802771 https://bugzilla.novell.com/show_bug.cgi?id=802771#c0 Summary: kde wants to remove hardware Classification: openSUSE Product: openSUSE 12.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jw(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=523891) --> (http://bugzilla.novell.com/attachment.cgi?id=523891) Do you want KDE to permanently forget about these devices? >From time to time I get kde-ish popups that list many audio devices that should go away. I am running xfce, and it often happens, when pidgin makes a "ding" sound. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 784175] New: Mounting/ejecting USB drive needs root
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=784175 https://bugzilla.novell.com/show_bug.cgi?id=784175#c0 Summary: Mounting/ejecting USB drive needs root Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: martin.jakl(a)qbicon.cz QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.92 Safari/537.4 After updating to openSUSE 12.2 mounting/ejecting USB drive/DVD-ROM started to ask for root permissions. Reproducible: Always Steps to Reproduce: 1. insert USB drive Actual Results: Message box asking for root password appears. Expected Results: Operation is permitted for normal user. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 24

[Bug 444155] Amarok stutters with xine+pulseaudio backend
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=444155 https://bugzilla.novell.com/show_bug.cgi?id=444155#c11 Hrvoje Senjan <hrvoje.senjan(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED CC| |hrvoje.senjan(a)gmail.com Resolution| |NORESPONSE --- Comment #11 from Hrvoje Senjan <hrvoje.senjan(a)gmail.com> 2013-09-05 22:31:50 UTC --- I think it is safe to close this report ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 813272] New: Computer freezes after some time
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=813272 https://bugzilla.novell.com/show_bug.cgi?id=813272#c0 Summary: Computer freezes after some time Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: ingesvensson(a)orion.vokby.se QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created an attachment (id=533363) --> (http://bugzilla.novell.com/attachment.cgi?id=533363) Xorg log after reboot User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 Running some applications and waiting for 10 to 20 minutes mouse and hole computer freezes. Reproducible: Always Steps to Reproduce: 1.Start Dolphin, Firefox, kdenlive, Skype, Thunderbird and WebmonX 2.Wait 10-20 minutes 3. Actual Results: Computer and mouse freezes Expected Results: Should be able to run computer for days. kdenlive is from Packman output of hwinfo --gfx: 30: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: VCu0.Ops3VmLD3p2 Parent ID: _Znp.7b0eoFd8jc8 SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia VGA compatible controller" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0ca2 SubVendor: pci 0x174b "PC Partner Limited" SubDevice: pci 0x2150 Revision: 0xa2 Driver: "nouveau" Driver Modules: "drm" Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xce000000-0xcfffffff (ro,non-prefetchable) I/O Ports: 0xd800-0xd87f (rw) Memory Range: 0xfe980000-0xfe9fffff (ro,non-prefetchable,disabled) IRQ: 18 (647 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000CA2sv0000174Bsd00002150bc03sc00i00" Driver Info #0: Driver Status: nvidiafb is not active Driver Activation Cmd: "modprobe nvidiafb" Driver Info #1: Driver Status: nouveau is active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) Primary display adapter: #30 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 807189] New: Gnome Dash, duplicate icons
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=807189 https://bugzilla.novell.com/show_bug.cgi?id=807189#c0 Summary: Gnome Dash, duplicate icons Classification: openSUSE Product: openSUSE Factory Version: 12.3 Beta 1 Platform: x86-64 OS/Version: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: tomas.kloucek(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 When I add some application to the Dash as favorite one and than run it, it has two icons (one ugly and one nice). Both should combine and show up as a single icon. The problematic apps, which I have found are: Mendeley Yast (and all sub "applications") - http://i46.tinypic.com/oixgeb.png VirtualBox Nixnote (Nixnote has completely different icon than the original) - http://i49.tinypic.com/168exc7.png Reproducible: Always Steps to Reproduce: 1. Pin the Yast into the Dash 2. Run Yast from the Dash 3. See the Dash Actual Results: The Yast icon is duplicated and the second is rely ugly Expected Results: One nice icon openSuse 12.3, Gnome -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 819720] New: Marking Text of a PDF-File in Evince 3.6.1 results in black rectangles
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=819720 https://bugzilla.novell.com/show_bug.cgi?id=819720#c0 Summary: Marking Text of a PDF-File in Evince 3.6.1 results in black rectangles Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 0 Platform: i686 OS/Version: openSUSE 12.3 Status: NEW Severity: Minor Priority: P5 - None Component: Xfce AssignedTo: bnc-team-xfce(a)forge.provo.novell.com ReportedBy: beat.kaufmann(a)gmx.ch QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=539057) --> (http://bugzilla.novell.com/attachment.cgi?id=539057) Screenshot of Evince 3.6.1 with marked Text User-Agent: Mozilla/5.0 (X11; Linux i686; rv:20.0) Gecko/20100101 Firefox/20.0 This happens with the themes Raleigh and many others, which seem to be based on gtk-2.0 (with the exception of the theme Adwaita, but there is another problem with visibility of forms). This Problem didn't occur with opensuse 12.1. Reproducible: Always Steps to Reproduce: 1. Chose Theme Raleigh (Settings Manager - Appearance) 2. Open a PDF-File with Evince 3.6.1 3. Marking some Text Actual Results: I can't read the marked Text, because there are black rectangles (view Attachment) Expected Results: I would read the marked Text. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 825903] New: librest: use system ca database
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=825903 https://bugzilla.novell.com/show_bug.cgi?id=825903#c0 Summary: librest: use system ca database Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 2 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: dimstar(a)opensuse.org ReportedBy: lnussel(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- librest is built do use /etc/ssl/ca-bundle.pem. Please don't do that. It should rely on the defaults provided by the crypto libraries instead. Libsoup has a property 'ssl-use-system-ca-file' that can be used instead of hardcoding a file. OTOH that's libsoup's default so librest actually shouldn't be setting anything. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 797258] New: openSUSE:12.2/graphviz: Bug
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=797258 https://bugzilla.novell.com/show_bug.cgi?id=797258#c0 Summary: openSUSE:12.2/graphviz: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: pth(a)suse.com ReportedBy: itsbo(a)fz-juelich.de QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: Yes Graphviz Package in OpenSuSE 12.2 is missing binary for "lefty". "dotty" won't work without "lefty". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 838027] New: Missing Git dependency 'perl-Term-ReadKey'
by bugzilla_noreply＠novell.com 05 Sep '13

05 Sep '13

https://bugzilla.novell.com/show_bug.cgi?id=838027 https://bugzilla.novell.com/show_bug.cgi?id=838027#c0 Summary: Missing Git dependency 'perl-Term-ReadKey' Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: All OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hogejo(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0 If you want to use Git with/for SVN repositories, in some cases Git will crash because of the missing dependency 'perl-Term-ReadKey'. Please add the package 'perl-Term-ReadKey' to the dependencies of the Git package. Reproducible: Sometimes Steps to Reproduce: 1. Install Git with 'zypper in git git-svn' 2. Try to connect to an SVN repository over HTTP(S) that requires a username and password. Actual Results: Git crashed because of the missing perl package. Expected Results: Git SVN asks for the password for the SVN repository. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3