From tv@solnet.ch Tue Jan 29 11:05:24 2008
From: Thomas Vogt <tv@solnet.ch>
To: autoinstall@lists.opensuse.org
Subject: [opensuse-autoinstall] no nameserver entry in resolv.conf
Date: Tue, 29 Jan 2008 12:05:12 +0100
Message-ID: <479F0868.6080506@solnet.ch>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============2330473733473633775=="

--===============2330473733473633775==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

Hello

Is there a way to add nameserver values to the resolv.conf with
autoyast.xml?
After the installation of OpenSuSE 10.3 (i386) with autoyast my
resolv.conf is always empty. Everything else works fine.

XML config:

<dns>
       <dhcp_hostname config:type="boolean">false</dhcp_hostname>
       <dhcp_resolv config:type="boolean">false</dhcp_resolv>
       <domain>mydomain</domain>
       <hostname>myhostname</hostname>
       <nameservers config:type="list">
         <nameserver>1.2.3.4</nameserver>
         <nameserver>1.2.3.5</nameserver>
       </nameservers>
     </dns>

I also tried it with a post-script but with no luck.

   <scripts>
     <post-scripts config:type="list">
       <script>
         <debug config:type="boolean">true</debug>
         <feedback config:type="boolean">false</feedback>
         <filename>myscript</filename>
         <interpreter>shell</interpreter>
         <location></location>
         <network_needed config:type="boolean">true</network_needed>
         <source><![CDATA[shell
#!/bin/sh
# Sort out resolv.conf
cat > /etc/resolv.conf <<EOF
nameserver 1.2.3.4
nameserver 1.2.3.5
EOF
]]></source>
       </script>
     </post-scripts>
   </scripts>

Any idea?

Regards,
Thomas
-- 
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

--===============2330473733473633775==--


From mzugec@suse.cz Wed Jan 30 06:34:52 2008
From: Michal Zugec <mzugec@suse.cz>
To: autoinstall@lists.opensuse.org
Subject: Re: [opensuse-autoinstall] no nameserver entry in resolv.conf
Date: Wed, 30 Jan 2008 07:35:02 +0100
Message-ID: <47A01A96.2020506@suse.cz>
In-Reply-To: <479F0868.6080506@solnet.ch>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============2962050894894306906=="

--===============2962050894894306906==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit

Thomas Vogt  wrote / napísal(a):
> Hello
> 
> Is there a way to add nameserver values to the resolv.conf with
> autoyast.xml?
> After the installation of OpenSuSE 10.3 (i386) with autoyast my
> resolv.conf is always empty. Everything else works fine.
> 
> XML config:
> 
> <dns>
>       <dhcp_hostname config:type="boolean">false</dhcp_hostname>
>       <dhcp_resolv config:type="boolean">false</dhcp_resolv>
>       <domain>mydomain</domain>
>       <hostname>myhostname</hostname>
>       <nameservers config:type="list">
>         <nameserver>1.2.3.4</nameserver>
>         <nameserver>1.2.3.5</nameserver>
>       </nameservers>
>     </dns>
> 
> I also tried it with a post-script but with no luck.
> 
>   <scripts>
>     <post-scripts config:type="list">
>       <script>
>         <debug config:type="boolean">true</debug>
>         <feedback config:type="boolean">false</feedback>
>         <filename>myscript</filename>
>         <interpreter>shell</interpreter>
>         <location></location>
>         <network_needed config:type="boolean">true</network_needed>
>         <source><![CDATA[shell
> #!/bin/sh
> # Sort out resolv.conf
> cat > /etc/resolv.conf <<EOF
> nameserver 1.2.3.4
> nameserver 1.2.3.5
> EOF
> ]]></source>
>       </script>
>     </post-scripts>
>   </scripts>
> 
> Any idea?
> 
> Regards,
> Thomas

Can you write a bugreport for that, please?
Thank you.


-- 
Best Regards,
Michal Zugec
Software developer
---------------------------------------------------------------------
SuSE CR, s.r.o.                                e-mail: mzugec(a)suse.cz
Lihovarska 1060/12                              tel: +420 284 028 960
190 00 Praha 9                                  fax: +420 296 542 374
Czech Republic                                    http://www.suse.cz/

-- 
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

--===============2962050894894306906==--


From ug@suse.de Wed Jan 30 09:46:44 2008
From: Uwe Gansert <ug@suse.de>
To: autoinstall@lists.opensuse.org
Subject: Re: [opensuse-autoinstall] no nameserver entry in resolv.conf
Date: Wed, 30 Jan 2008 10:46:52 +0100
Message-ID: <200801301046.53309.ug@suse.de>
In-Reply-To: <479F0868.6080506@solnet.ch>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============9153654854050604352=="

--===============9153654854050604352==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit

On Dienstag, 29. Januar 2008, Thomas Vogt wrote:

> Is there a way to add nameserver values to the resolv.conf with
> autoyast.xml?
> After the installation of OpenSuSE 10.3 (i386) with autoyast my
> resolv.conf is always empty. Everything else works fine.
>
> I also tried it with a post-script but with no luck.
>
>    <scripts>
>      <post-scripts config:type="list">
>        <script>
>          <debug config:type="boolean">true</debug>
>          <feedback config:type="boolean">false</feedback>
>          <filename>myscript</filename>
>          <interpreter>shell</interpreter>
>          <location></location>
>          <network_needed config:type="boolean">true</network_needed>

try to set network_needed to false or use init-scripts. Then it should work.

-- 
ciao, Uwe Gansert

Uwe Gansert, Server Technologies Team
SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg)
Business: http://www.suse.de/~ug
listening to: Obsolete by De/Vision
-- 
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

--===============9153654854050604352==--


From mmarion@qualcomm.com Wed Jan 30 20:23:33 2008
From: Mike Marion <mmarion@qualcomm.com>
To: autoinstall@lists.opensuse.org
Subject: Re: [opensuse-autoinstall] no nameserver entry in resolv.conf
Date: Wed, 30 Jan 2008 12:23:33 -0800
Message-ID: <20080130202332.GE5092@cornholio.qualcomm.com>
In-Reply-To: <479F0868.6080506@solnet.ch>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============3570365019891784409=="

--===============3570365019891784409==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

On Tue, Jan 29, 2008 at 12:05:12PM +0100, Thomas Vogt wrote:

> <dns>
>       <dhcp_hostname config:type="boolean">false</dhcp_hostname>
>       <dhcp_resolv config:type="boolean">false</dhcp_resolv>
>       <domain>mydomain</domain>
>       <hostname>myhostname</hostname>
>       <nameservers config:type="list">
>         <nameserver>1.2.3.4</nameserver>
>         <nameserver>1.2.3.5</nameserver>
>       </nameservers>
>     </dns>

That's exactly how I'm doing ours here and it works great.. sles9-sp3
through sles/sled10-sp1.  This probably isn't it, but that is inside the
<networking> tags, right?

Here's what my desktop entries look like in the cached xml file.. I
build the file on the fly in the pre-install scripts too (actual
names/ips mod'd of course):


  <networking>
    <dhcp_options>
      <dhclient_additional_options></dhclient_additional_options>
      <dhclient_client_id></dhclient_client_id>
      <dhclient_hostname_option>AUTO</dhclient_hostname_option>
    </dhcp_options>
    <dns>
      <dhcp_hostname config:type="boolean">false</dhcp_hostname>
      <dhcp_resolv config:type="boolean">false</dhcp_resolv>
      <domain>ourdomain</domain>
      <hostname>desktopname</hostname>
      <nameservers config:type="list">
        <nameserver>1.2.3.4</nameserver>
        <nameserver>1.2.3.5</nameserver>
      </nameservers>
    </dns>
    <interfaces config:type="list">
      <interface>
        <bootproto>static</bootproto>
        <device>eth0</device>
        <ipaddr>192.168.1.50</ipaddr>
        <netmask>255.255.254.0</netmask>
        <startmode>auto</startmode>
        <usercontrol>no</usercontrol>
      </interface>
    </interfaces>
    <managed config:type="boolean">false</managed>
    <modules config:type="list">
      <module_entry>
        <device>static-0</device>
        <module></module>
        <options></options>
      </module_entry>
    </modules>
    <routing>
      <ip_forward config:type="boolean">false</ip_forward>
      <routes config:type="list">
        <route>
          <destination>default</destination>
          <device>-</device>
          <gateway>192.168.1.1</gateway>
          <netmask>-</netmask>
        </route>
      </routes>
    </routing>
  </networking>

Installs happen using dhcp, the above is done (like I said) in a
pre-install script (my pre.sh is a wrapper that just mounts an NFS path
then does a basic "for script in $path/*; do $script; done" idea) that
had read in some default values (like initial dns servers and such) and
builds the above on the fly using the passed static ip, name dns server,
etc, then spits out the above into the /tmp/profile/modified.xml.  Has
worked great across the sles/sled versions thus far.  The reboot after
initial install is done uses the above networking config and creates a
valid resolv.conf.

-- 
Mike Marion-Unix SysAdmin/Staff IT Engineer-http://www.qualcomm.com
The idea that an arbitrary naive human should be able to properly use a
given tool without training or understanding is even more wrong for
computing than it is for other tools (eg automobiles, airplanes, guns or
power saws).
-- 
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org

--===============3570365019891784409==--