August 2012 - openSUSE Autoinstall - openSUSE Mailing Lists

[opensuse-autoinstall] 新建电子邮件
by Norman Zhou 23 Aug '12

23 Aug '12

The 14th International Exhibition on Surfactant & Detergent Apr. 10-12, 2013 Shanghai Everbright Convention and Exhibition Center, China Review on last exhibition The “2012 International Exhibition of Surfactants and Detergents” was held in Shanghai on April 14 - April 16, 2012, which attracted suppliers and industrial elites around the world to gather in Shanghai to discuss about new development trends and directions of the industry. In the efforts of the organizers, the exhibition made gratifying achievements based on the support of existing customers and positive response of new customers. 163 exhibitors from 13 countries and regions showed their new products, new technologies and new achievements in the three-day exhibition to over 6013 professional visitors from 48 countries and regions. The exhibition gathered lots of brands in the world including SABIC, GOC, AkzoNobel, Rhodia, Milliken, KLK, Lonkey, Zhejiang Zanyu, Kimyagaran, Zhejiang Jinke, Liaoning Oxiran, Woellner France, Jinling Sinopec, Qingshan, Odyssey, etc. The exhibition not only focuses on the investigation of new technologies and environmentally friendly products, but also pays more attention to exchanges with international enterprises in the same industry. Twelfth International Conference of Surfactants and Detergents (ICSD) sponsored by China Association of Surfactant Soap and Detergent Industries and China Research Institute of Daily Chemical Industry was held on April 15 at SECEC Hotel. “A Virtuous Path for Industry Development under Low-Carbon Economy” was the theme of last conference, having totally received more than 100 domestic and foreign academic exchange papers. After the review of the Academic Committee of Conference, 19 high quality papers were selected for the oral communication and more than 60 articles were selected for wall poster. Totally, more than 300 delegates from 20countries and regions have attended the four-day conference. If you are the supplier of following products, please reserve the exhibition booth ☆ Silicone surfactants, bio-surfactants, fluorinated surfactants and other special surfactants: large and wide green anionic surfactants, cationic surfactants, nonionic surfactants, zwitterion surfactants: new and green surfactants, such as Fatty Acid Methyl Ester Ethoxylates (FMEE), Fatty Acid Methyl Ester Sulfonate (MES), Alkyl Polyglycosides (APG) and monoethanolamine succinylosuccinic ester; ☆ Alkyl benzene (AB), Ethylene Oxide (EO), Propylene Oxide (PO), Nonyl phenol (NP), Octyl phenol (OP), Ethylene Glycol (EG), Ethanolamine, Polyethylene Glycol (PEG), Ethylene Amine (EA), Fatty Acids, Fatty Alcohols, Fatty Amines, Fatty Acid Methyl Ester; ☆ Detergents: sodium tripolyphosphate, sodium silicate, sodium carbonate, sodium sulphate, brightener, enzyme-based agents, raw materials of wash & chemistry and its intermediate product; ☆ Personal and home care products: (perfumed) soap, washing powder, liquid detergent, shower gel, hand sanitizer, cleanser essence, detergents, industrial, commercial, residential washing equipments; ☆ Packaging technology, materials and mechanical equipment of daily chemical products; ☆ Other compound surfactants, detergents and research and patented technology of various surfactants and detergents; Details for participation Section A：2800 USD/standard booth (9m2 each) Raw space cost: 280 USD /m2 (min. 18m2) Undertaker: Shanghai Yihan Exhibition Service Co., Ltd. Address: Rm. 1705, Seat 2 Minfu Mansion,No 228 Xinjian Road,Shanghai,China. Zip code: 200110 Te.: +86-21-64137426 64133729 Fax: +86-21-60919309 Contact person: Liu kui MP:86-13636683790 E-mail：yihanexpo(a)vip.sina.com http://www.iesdexpo.com ---------------------------------------------------------------------------------- If you don't want to receive these Emails, please visit the following link to unsubscribe: http://hosted.comm100.cn/Newsletter/Newsletter_Unsubscribe.aspx?type=0&Site… If you want to receive more types of Emails, please visit the following link to subscribe: http://hosted.comm100.cn/Newsletter/Newsletter_Subscribe.aspx?type=0&SiteId… You could share this Email to your friends, please visit the following link to forward: http://hosted.comm100.cn/Newsletter/Newsletter_Forward.aspx?type=0&SiteId=8… Comm100 Email Marketing powered by Comm100 http://www.comm100.com/emailmarketingnewsletter?c_cid=newsletter20120823 -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] Autoyast and Virtualbox ?
by Dsant 20 Aug '12

20 Aug '12

Hello, what is the best way to use Autoyast with Virtualbox ? When changing autoinst.xml file, I could build a new ISO image, give the iso to virtualbox : this is not very practical. How do you do, you ? Dsant -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 2

[opensuse-autoinstall] Autoyast : Grub doesn't install
by Dsant 19 Aug '12

19 Aug '12

Hello, I Have the same problem as in the RESOLVED bug here : https://bugzilla.novell.com/show_bug.cgi?id=757523 * created a xml file with yast2 * like in the description, autoyast has lost user, root password. * Then image : https://bugzilla.novell.com/attachment.cgi?id=486439&action=edit is the file produced by yast2 corrupted ? Dsant Here is the Yast2 file : <?xml version="1.0"?> <!DOCTYPE profile> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <bootloader> <device_map config:type="list"> <device_map_entry> <firmware>fd0</firmware> <linux>/dev/sdc</linux> </device_map_entry> </device_map> <global> <activate>true</activate> <boot_boot>false</boot_boot> <boot_extended>false</boot_extended> <boot_mbr>true</boot_mbr> <boot_root>false</boot_root> <default>Linux_sda1</default> <gfxmenu>/boot/message</gfxmenu> <timeout config:type="integer">8</timeout> </global> <loader_type>grub</loader_type> <sections config:type="list"> <section> <append>splash=silent quiet showopts</append> <image>/boot/vmlinuz</image> <initrd>/boot/initrd</initrd> <name>Linux_sda1</name> <noverifyroot>false</noverifyroot> <original_name>linux</original_name> <root>(hd0,0)</root> <type>image</type> <vgamode>0x314</vgamode> </section> <section> <append>splash=silent quiet showopts</append> <image>/boot/vmlinuz</image> <initrd>/boot/initrd</initrd> <name>Linux_sda2</name> <noverifyroot>false</noverifyroot> <original_name>linux</original_name> <root>(hd0,1)</root> <type>image</type> <vgamode>0x314</vgamode> </section> <section> <append>showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe</append> <image>/boot/vmlinuz</image> <initrd>/boot/initrd</initrd> <name>Failsafe</name> <original_name>failsafe</original_name> <root></root> <type>image</type> </section> </sections> </bootloader> <deploy_image> <image_installation config:type="boolean">false</image_installation> </deploy_image> <firewall> <enable_firewall config:type="boolean">false</enable_firewall> <start_firewall config:type="boolean">false</start_firewall> </firewall> <groups config:type="list"> <group> <gid>7</gid> <group_password>x</group_password> <groupname>lp</groupname> <userlist>dd</userlist> </group> <group> <gid>305</gid> <group_password>!</group_password> <groupname>vboxusers</groupname> <userlist>dd</userlist> </group> <group> <gid>33</gid> <group_password>x</group_password> <groupname>video</groupname> <userlist>gdm,dd</userlist> </group> <group> <gid>17</gid> <group_password>x</group_password> <groupname>audio</groupname> <userlist>dd,pulse</userlist> </group> </groups> <keyboard> <keymap>french</keymap> </keyboard> <login_settings/> <networking> <dhcp_options> <dhclient_hostname_option>AUTO</dhclient_hostname_option> </dhcp_options> <dns> <dhcp_hostname config:type="boolean">false</dhcp_hostname> <domain>lyon</domain> <hostname>mypc</hostname> <nameservers config:type="list"> <nameserver>192.168.200.1</nameserver> <nameserver>8.8.8.8</nameserver> </nameservers> <resolv_conf_policy>auto</resolv_conf_policy> <searchlist config:type="list"> <search>lyon</search> </searchlist> <write_hostname config:type="boolean">true</write_hostname> </dns> <interfaces config:type="list"> <interface> <bootproto>dhcp</bootproto> <device>eth0</device> <startmode>auto</startmode> <usercontrol>no</usercontrol> </interface> </interfaces> <ipv6 config:type="boolean">true</ipv6> <managed config:type="boolean">false</managed> <routing> <ip_forward config:type="boolean">false</ip_forward> </routing> </networking> <partitioning config:type="list"/> <runlevel> <default>5</default> <services config:type="list"> <service> <service_name>sshd</service_name> <service_start>3 5</service_start> </service> </services> </runlevel> <software> <packages config:type="list"> <package>autoyast2-installation</package> </packages> <patterns config:type="list"> <pattern>base</pattern> </patterns> </software> <sshd> <config> <AllowTcpForwarding config:type="list"> <listentry>yes</listentry> </AllowTcpForwarding> <Compression config:type="list"> <listentry>yes</listentry> </Compression> <MaxAuthTries config:type="list"> <listentry>6</listentry> </MaxAuthTries> <PermitRootLogin config:type="list"> <listentry>no</listentry> </PermitRootLogin> <Port config:type="list"> <listentry>1975</listentry> </Port> <PrintMotd config:type="list"> <listentry>yes</listentry> </PrintMotd> <PubkeyAuthentication config:type="list"> <listentry>yes</listentry> </PubkeyAuthentication> <RSAAuthentication config:type="list"> <listentry>no</listentry> </RSAAuthentication> <X11Forwarding config:type="list"> <listentry>no</listentry> </X11Forwarding> </config> <status config:type="boolean">true</status> </sshd> <timezone> <hwclock>UTC</hwclock> <timezone>Europe/Paris</timezone> </timezone> <user_defaults> <group>25</group> <groups>video</groups> <home>/home</home> <inactive>-1</inactive> <shell>/bin/bash</shell> <skel>/etc/skel</skel> <umask>022</umask> </user_defaults> <users config:type="list"> <user> <encrypted config:type="boolean">true</encrypted> <fullname>dd</fullname> <gid>25</gid> <home>/home/dd</home> <password_settings> <inact>-1</inact> <max>99999</max> <min>0</min> <warn>7</warn> </password_settings> <shell>/bin/bash</shell> <uid>1000</uid> <user_password>$1$kL54rgJ2$3j8iyHtLs8IkFkFVv7VyW0</user_password> <username>dd</username> </user> <user> <encrypted config:type="boolean">true</encrypted> <fullname>root</fullname> <gid>0</gid> <home>/root</home> <password_settings> <inact>-1</inact> <max>-1</max> <min>-1</min> <warn>-1</warn> </password_settings> <shell>/bin/bash</shell> <uid>0</uid> <user_password>$1$C0LfrEWK$LK83dzU/fuoz/5rlEwkWD/</user_password> <username>root</username> </user> </users> </profile> -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 1

[opensuse-autoinstall] Autoyast - Grub : which arguments ?
by Dsant 19 Aug '12

19 Aug '12

With autoyast, in the xml file I put the grub arguments : kernel : /boot/vmlinuz initrd : /boot/initrd root : (hd0,0) However, during installation I can see that /boot is empty ! And grub install fails ("An error occurred during initrd creation"). What are the correct arguments ? Dsant, from France XML file (part) : <section> <append>splash=silent quiet showopts</append> <image>/boot/vmlinuz</image> <initrd>/boot/initrd</initrd> <name>Linux_sda1</name> <noverifyroot>false</noverifyroot> <original_name>linux</original_name> <root>(hd0,0)</root> <type>image</type> </section> -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] xml tag to add "sudoers_base" line to /etc/ldap.conf file?
by Nefi Munoz 16 Aug '12

16 Aug '12

Hi, Is there an autoyast tag to add a sudoers line to /etc/ldap.conf file? My customer tried adding this line to <ldap> section but this didn't work: <sudoers_base>ou=sudoers,dc=HPC,dc=COMPANY,dc=COM</sudoers_base> Below is the complete ldap section (I masked company name) Thanks in advance, Nefi M. --------------------------- <ldap> <base_config_dn>ou=ldapconfig,dc=HPC,dc=COMPANY,dc=COM</base_config_dn> <bind_dn></bind_dn> <create_ldap config:type="boolean">false</create_ldap> <file_server config:type="boolean">false</file_server> <ldap_domain>dc=HPC,dc=COMPANY,dc=COM</ldap_domain> <ldap_server>server.hpc.COMPANY.com server.hpc.COMPANY.com</ldap_server> <ldap_tls config:type="boolean">false</ldap_tls> <ldap_v2 config:type="boolean">false</ldap_v2> <login_enabled config:type="boolean">true</login_enabled> <member_attribute>member</member_attribute> <nss_base_group>ou=Group,dc=HPC,dc=COMPANY,dc=COM</nss_base_group> <nss_base_passwd>ou=People,dc=HPC,dc=COMPANY,dc=COM</nss_base_passwd> <nss_base_shadow>ou=People,dc=HPC,dc=COMPANY,dc=COM</nss_base_shadow> <pam_password>exop</pam_password> <start_autofs config:type="boolean">true</start_autofs> <start_ldap config:type="boolean">true</start_ldap> <tls_cacertdir>/etc/ssl/certs</tls_cacertdir> <sudoers_base>ou=sudoers,dc=HPC,dc=COMPANY,dc=COM</sudoers_base> </ldap> -----------------------------

2 2

[opensuse-autoinstall] schema fixes for <files>
by Andrew Daugherity 13 Aug '12

13 Aug '12

The autoyast schema currently lacks the file_location element and thus my profile fails to validate (despite working properly). I've fixed this in my "simple_files_fix" branch on github[1]. I've also made a "files_cleanup" branch that enforces what I think autoyast expects (open to correction, of course): * there should only be file_content or file_location, not both * file_path should be mandatory * everything else (file_owner, file_permissions, file_script) is optional but should only occur once per file * all of the file_* elements can occur in any order within the <file> tag Which brings me to a point of confusion: my profile, which I based on a previous version of the AutoYaST documentation, uses <file> rather than <config_file>, e.g.: <files config:type="list"> <file> <file_location>http://blah.blah/foo</file_location> <file_path>/foo/bar</file_path> </file> ... </files> However, the current documentation[2] uses <config_file> instead of <file>. My profile works correctly in both SLES 11 SP1 & SP2 and openSUSE 12.1, and the schema expects <file>, so this appears correct, but I hesitate to call the documentation wrong without further input. Whichever way is correct, everything should be reconciled. BTW, it's great that YaST on github now -- it makes fixes like this a lot easier! Uwe (or others), please let me know how you wish to proceed, and I'll file a github pull request and/or a BugZilla entry. Thanks, Andrew Daugherity Systems Analyst Division of Research, Texas A&M University [1] https://github.com/adaugherity/yast-autoinstallation/branches [2] http://www.suse.de/~ug/autoyast_doc/configuration.html#createprofile.comple… -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 1

[opensuse-autoinstall] USB-Stick as installation-Source
by Daniel Spannbauer 08 Aug '12

08 Aug '12

Hello, I wan't to install opensuse 11.4 with an USB Stick as the installation source. But how do I tell the system where the source is? I tried it with install=hd:// install=usb:// install=/dev/sdc1, with 2 Slashes, 3 slashes, on slash....nothing seems to work. Regards Daniel -- Daniel Spannbauer Software Entwicklung marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4 - 6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

5 23

[opensuse-autoinstall] Nachricht: INFO
by INFO Firmen 08 Aug '12

08 Aug '12

Guten Tag, Wir sind in Besitz neuer, aktualisierter Datenbanken deutscher Firmen und Unternehmen. Ihre Konkurrenz sucht täglich nach neuen Methoden der Kundengewinnung. Unser Produkt ermöglicht dies Ihnen auf effektive Weise. Wir laden Sie dazu ein, Gebrauch aus unseren Lösungen für eine gelungene Werbekampagne zu machen. Wir bieten Ihnen Datenbanken der aktivsten Firmen auf dem deutschen Markt, die gerne Interesse für Ihr Produkt zeigen und eine feste Zusammenarbeit mit Ihnen knüpfen. http://www.firmen-de.com/verzeichnis/ Beweis der Wirksamkeit unserer Produkte, ist die ständig wachsende Liste zufriedener Kunden, die für Ihr Angebot schnell neue Abnehmer fanden. Unsere Kataloge sind auf Branchen und Unterbranchen aufgeteilt, weshalb es einfach ist Kampagnen an Personen und Firmen zu wenden, die Abnehmer für Ihre Produkte und Dienstleistungen sein können. Die Datenbank wird alle drei Monate aktualisiert, zusätzlich bieten wir jedem neuen Kunden, der Datenbanken von Firmen bei uns kauft, die erste Aktualisierung KOSTENLOS an. Das Produkt wird elektronisch und auf CD-ROM geliefert. Weitere Informationen finden Sie auf unserer Website: http://www.firmen-de.com/ Sie können uns auch gerne persönlich kontaktieren, wir sind bereit Ihnen auf alle Fragen zu antworten. Mit freundlichem Gruß --- http://www.firmen-de.com -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

1 0

[opensuse-autoinstall] 12.2RC2: Failed to fetch init script from NFS, all other scripts OK
by Joschi Brauchle 07 Aug '12

07 Aug '12

Hey there, I just started testing 12.2RC2 and noticed to following. There are multiple custom user scripts in my XML file, all of which get pulled from an NFS server. Now, all scripts were transferred successfully to the installation system under /var/adm/autoinstall/scripts, EXCEPT the init script! The Init script is mention like this in my XML: -------- <init-scripts config:type="list"> <script> <filename>init0000_final_installation.sh</filename> <location><![CDATA[nfs://<server>/<path>/init0000_final_installation.sh]]></location> </script> </init-scripts> -------- All other scripts come from the same NFS server, same path, different filename (of course) and work nicely. In y2log, it says: -------- 2012-08-06 10:34:13 <1> test122(3344) [Interpreter] clients/autoinst_scripts2_finish.ycp:60 Calling YaST client autoinst_scripts2_finish 2012-08-06 10:34:13 <1> test122(3344) [YCP] clients/autoinst_scripts2_finish.ycp:33 starting autoinst_scripts2_finish 2012-08-06 10:34:13 <1> test122(3344) [YCP] AutoinstScripts.ycp:690 Writing init script into /var/adm/autoinstall/init.d/init0000_final_installation.sh 2012-08-06 10:34:13 <1> test122(3344) [agent-system] SystemAgent.cc(Execute):1130 mkdir /tmp/YaST2-03344-nXRhf8/tmp_mount 2012-08-06 10:34:13 <2> test122(3344) [YCP] autoinstall/io.ycp:196 Mount failed 2012-08-06 10:34:13 <3> test122(3344) [YCP] AutoinstScripts.ycp:696 script nfs://<server>/<path>/init0000_final_installation.sh could not be retrieved -------- Another init script is included with its source in the XML file, and this is running fine. Hence, it looks like the problem lies in mounting the remote NFS path when running the init scripts...? Best regards, Joschi Brauchle

4 10