Hello all,
I'm testing a new autoyast.xml for OpenSUSE 11.3 and at the end of
stage1 of the installation I'm getting this error:
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> setup --stage2=/boot/grub/stage2 --force-lba (hd0) (hd0,4)
Error 21: Selected disk does not exist
grub> quit
This is quite strange, because all partitions were created successfully
without any complains, but grub seems unable to install in der MBR.
I found that in the grub "disk order settings" "/dev/sda" is defined -
this doesn't seem to work anny more in 11.3?
Changing to "/dev/disk/by-id/ata-XXX" by hand solved that, but breaks
the complete auto installation process - is there another solution?
The bootloader part of my autoyast.xml looks like this:
<bootloader>
<device_map config:type="list">
<device_map_entry>
<firmware>hd0</firmware>
<linux>/dev/sda/</linux>
</device_map_entry>
</device_map>
<global>
<activate>true</activate>
<default>Desktop -- openSUSE 11.3 -- 2.6.34-12</default>
<generic_mbr>true</generic_mbr>
<gfxmenu>(hd0,4)/message</gfxmenu>
<lines_cache_id>4</lines_cache_id>
<timeout config:type="integer">8</timeout>
</global>
<initrd_modules config:type="list">
<initrd_module>
<module>thermal</module>
</initrd_module>
<initrd_module>
<module>ata_piix</module>
</initrd_module>
<initrd_module>
<module>ata_generic</module>
</initrd_module>
<initrd_module>
<module>piix</module>
</initrd_module>
<initrd_module>
<module>ide_pci_generic</module>
</initrd_module>
<initrd_module>
<module>processor</module>
</initrd_module>
<initrd_module>
<module>fan</module>
</initrd_module>
<initrd_module>
<module>ahci</module>
</initrd_module>
<initrd_module>
<module>pata_atiixp</module>
</initrd_module>
<initrd_module>
<module>atiixp</module>
</initrd_module>
</initrd_modules>
<loader_type>grub</loader_type>
<sections config:type="list">
<section>
<append>resume=/dev/sda6 splash=silent quiet crashkernel=
showopts</append>
<image>(hd0,4)/vmlinuz-2.6.34-12-desktop</image>
<initial>1</initial>
<initrd>(hd0,4)/initrd-2.6.34-12-desktop</initrd>
<lines_cache_id>0</lines_cache_id>
<name>Desktop -- openSUSE 11.3 --</name>
<original_name>linux</original_name>
<root>/dev/sda7</root>
<type>image</type>
<vgamode>0x31a</vgamode>
</section>
<section>
<append>showopts apm=off noresume nosmp maxcpus=0 edd=off
powersaved=off nohz=off highres=off processor.max_cstate=1
x11failsafe</append>
<image>(hd0,4)/vmlinuz-2.6.34-12-desktop</image>
<initrd>(hd0,4)/initrd-2.6.34-12-desktop</initrd>
<lines_cache_id>1</lines_cache_id>
<name>Failsafe -- openSUSE 11.3 --</name>
<original_name>failsafe</original_name>
<root>/dev/sda7</root>
<type>image</type>
<vgamode>0x31a</vgamode>
</section>
</sections>
</bootloader>
Any ideas? Thanks!
Regards,
Ivan
--
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help(a)opensuse.org
