On 14 December 2012 21:02, Alexander Graf wrote:

On 14.12.2012, at 22:00, Andrew Wafaa wrote:

...

On 14 December 2012 16:42, Dirk Müller wrote:

...

Hi,

http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/

does anyone see a blocker issue with those images being released as Milestone 2?

I've tested the panda image and it seems to work. Any volunteer for the other images?

Ideally I'd like to push it out as Milestone 2 asap.

TIA, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

I've not had a chance to check the Panda or Origen images yet. Also I've just setup a repo for the Chromebook, would it be possible to wait till that is ready?

I don't think we need to wait for the chromebook image, as the chromebook kernel is not part of factory.

Alex

OK fair enough. I won't be able to test till Monday though. -- Andrew Wafaa IRC: FunkyPenguin GPG: 0x3A36312F -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

On 15.12.2012, at 13:19, Guillaume Gardet wrote:

Hi,

Le 14/12/2012 17:42, Dirk Müller a écrit :

...

Hi,

http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/

does anyone see a blocker issue with those images being released as Milestone 2?

I've tested the panda image and it seems to work. Any volunteer for the other images?

I tested BeagleBoard xM (kernel 3.6.0-20-omap2plus). At first boot, I get 28 times and then 25 times the following line ()number after udevd change each time): udevd[1264]: failed to execute '/usr/lib/udev/socket:/org/kernel/dm/multipath_event' 'socket:/org/kernel/dm/multipath_event': No such file or directory It does not seem to hurt but it is always bad to see failure messages. ;)

This one goes to Hannes :).

No yast2-firstboot launched.

Is the respective logic implemented in the config.sh script?

After a reboot, I am no more able to log in via serial port (only SSH is ok). It is a strange behavior: some keys pressed are not shown (received?), sometimes a return seems to be received by the board but a char key was pressed. If I copy/paste login/password, I am able to login and I get this message: stty: standard input: unable to perform all requested operations Once logged in, strange behavior of my keyboard (through serial) is still there.

This indicates that 2 gettys are connected to the same tty. Does gfx login work?

* Audio: Need to install alsa-utils (and deps) and add a config file. Need to modprobe manually snd-soc-omap3beagle

I thought you had a patch for this one? :)

* CPU: Bogomips are: - idle: 175.65 (was 262.08 for 12.2) - full: 467.41 (was 700.57 for 12.2)

We probably enable CPU throttling in Factory.

* DSP: Need to modprobe manually: modprobe mailbox_mach modprobe tidspbridge base_img=/lib/dsp/baseimage.dof

Any ideas how to work around this? Either by having the modules probe themselves or by adding a config.sh hack.

* Ethernet: ok

* SD/MMC: ok

* UART (debug): ok

* USB: ok

* Video: No omapdrm. (was disabled in kernel config some times ago and then re-enabled). See: http://kernel.opensuse.org/cgit/kernel-source/commit/config/armv7hl/omap2plu... http://kernel.opensuse.org/cgit/kernel-source/commit/config/armv7hl/omap2plu... Then, we can use omapfb dribver as a workaround: modprobe panel-tfp410 modprobe omapfb mode=dvi:1440x900MR-24@60

:(. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org