[opensuse-arm] Factory: boot.scr not updated
Hi, after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot. Anything changed in config or kiwi? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 28.05.2015 um 16:32 schrieb Guillaume Gardet:
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi?
I have the same problem. Image is http://download.opensuse.org/ports/armv7hl/factory/images/openSUSE-Tumblewee... The first boot is running, when doing a reboot uboot stops with: ... switch to partitions #0, OK mmc0 is current device ** File not found boot/linux.vmx ** SCRIPT FAILED: continuing... ** Bad partition specification mmc 0:0:1 ** ** Bad partition specification mmc 0:0:1 ** ** Bad partition specification mmc 0:0:1 ** ## Error: "bootcmd_firstboot" not defined ## Error: "bootcmd_firstboot" not defined ## Error: "bootcmd_firstboot" not defined ## Error: "bootcmd_firstboot" not defined sunxi# ext4ls mmc 0:1 / <DIR> 1024 . <DIR> 1024 .. <DIR> 12288 lost+found <SYM> 1 boot 2678 boot.scr <DIR> 1024 dtb 22528 sunxi-spl.bin 363768 u-boot-sunxi-with-spl.bin 331000 u-boot.img 0 0x76fb834e 1484 boot.readme 2606 boot.script 182205 config-4.0.4-1-default <DIR> 1024 dracut <SYM> 22 initrd 292683 symvers-4.0.4-1-default.gz 239 sysctl.conf-4.0.4-1-default 3465580 System.map-4.0.4-1-default 8440103 vmlinux-4.0.4-1-default.gz <SYM> 22 zImage 6874320 zImage-4.0.4-1-default 7500320 initrd-4.0.4-1-default Maybe one of the hook scripts did not run? Br, Frank -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi, also with new builds from today the situation is still the same. it seems that all sunxi based board images are broken. I tried to find out what is wrong but up to now without success. 'Old' images with kernel 3.19 (Factory) still work. Br, Frank -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 07/06/2015 22:31, Frank Kunz a écrit :
Hi,
also with new builds from today the situation is still the same. it seems that all sunxi based board images are broken. I tried to find out what is wrong but up to now without success. 'Old' images with kernel 3.19 (Factory) still work.
Could you give us the kiwi version from working image, please? Guillaume
Br, Frank
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi?
Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :( boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh ++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 ********************************************************************** How could we debug this? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 11:43, Guillaume Gardet a écrit :
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi?
Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh
Marcus, should not we look for /mnt/kiwi-hooks/setupUBoot.sh since at this moment, partition is mounted on /mnt ? Guillaume
++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this?
Guillaume
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi,
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi?
Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh ++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this?
Check the initrd if the script is really included gzip -cd <initrd> | cpio -it | grep setupUBoot.sh If it does not exist at all check if the tarball providing the script(s) is bootincluded <archive name="foo.tgz" bootinclude="true"/> Next check if the archive bundled the scripts correctly, should look like this: tar -tf foo.tgz kiwi-hooks/ kiwi-hooks/setupUBoot.sh If all that matches check the kiwi build log if you can see the "Installing archives" log information Regards, Marcus -- Public Key available via: https://keybase.io keybase search marcus_schaefer ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE Linux GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg HRB: 21284 (AG Nürnberg) Germany GF: Felix Imendörffer, Jane Smithard GF: Dilip Upmanyu, Graham Norton http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 11:54, Guillaume Gardet a écrit :
Le 08/06/2015 11:43, Guillaume Gardet a écrit :
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi?
Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh
Marcus, should not we look for /mnt/kiwi-hooks/setupUBoot.sh since at this moment, partition is mounted on /mnt ?
I will send a patch to fix this later today. Guillaume
Guillaume
++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this?
Guillaume
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi,
Marcus, should not we look for /mnt/kiwi-hooks/setupUBoot.sh since at this moment, partition is mounted on /mnt ?
no hook scripts are embedded into the initrd, and if not actively removed (e.g via config.sh) they are also available in the later system for reference. Most people use an init/systemd script to remove them on first boot though because they are not really needed at that stage anymore Regards, Marcus -- Public Key available via: https://keybase.io keybase search marcus_schaefer ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE Linux GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg HRB: 21284 (AG Nürnberg) Germany GF: Felix Imendörffer, Jane Smithard GF: Dilip Upmanyu, Graham Norton http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 12:10, Marcus Schäfer a écrit :
Hi,
Marcus, should not we look for /mnt/kiwi-hooks/setupUBoot.sh since at this moment, partition is mounted on /mnt ? no hook scripts are embedded into the initrd, and if not actively removed (e.g via config.sh) they are also available in the later system for reference. Most people use an init/systemd script to remove them on first boot though because they are not really needed at that stage anymore
Ok, so, I will check if it is in the initrd. Guillaume
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 12:06, Marcus Schäfer a écrit :
Hi,
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi? Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh ++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this? Check the initrd if the script is really included
gzip -cd <initrd> | cpio -it | grep setupUBoot.sh
It is in uImage format, so we need to remove headers before extract it with: sudo tail -c+65 < initrd.uboot | gunzip > /tmp/out gzip -cd /tmp/out | cpio -it | grep setupUBoot.sh which returns: kiwi-hooks/setupUBoot.sh 265320 blocs So, it is here... Guillaume
If it does not exist at all check if the tarball providing the script(s) is bootincluded
<archive name="foo.tgz" bootinclude="true"/>
Next check if the archive bundled the scripts correctly, should look like this:
tar -tf foo.tgz
kiwi-hooks/ kiwi-hooks/setupUBoot.sh
If all that matches check the kiwi build log if you can see the "Installing archives" log information
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 12:24, Guillaume Gardet a écrit :
Le 08/06/2015 12:06, Marcus Schäfer a écrit :
Hi,
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi? Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh ++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this? Check the initrd if the script is really included
gzip -cd <initrd> | cpio -it | grep setupUBoot.sh
It is in uImage format, so we need to remove headers before extract it with: sudo tail -c+65 < initrd.uboot | gunzip > /tmp/out gzip -cd /tmp/out | cpio -it | grep setupUBoot.sh which returns: kiwi-hooks/setupUBoot.sh 265320 blocs
So, it is here...
Moreover, second script installUBoot.sh is executed (but it is a bit later). Full boot.kiwi log is there: http://paste.opensuse.org/90335031 Guillaume
Guillaume
If it does not exist at all check if the tarball providing the script(s) is bootincluded
<archive name="foo.tgz" bootinclude="true"/>
Next check if the archive bundled the scripts correctly, should look like this:
tar -tf foo.tgz
kiwi-hooks/ kiwi-hooks/setupUBoot.sh
If all that matches check the kiwi build log if you can see the "Installing archives" log information
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 12:40, Guillaume Gardet a écrit :
Le 08/06/2015 12:24, Guillaume Gardet a écrit :
Le 08/06/2015 12:06, Marcus Schäfer a écrit :
Hi,
Le 28/05/2015 16:32, Guillaume Gardet a écrit :
Hi,
after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot.
Anything changed in config or kiwi? Marcus, it seems that kiwi does not run our u-boot hook (setupUBoot.sh) which is in /kiwi-hooks/ because test if file exists fails whereas it is there. :(
boot.kiwi log: ********************************************************************** ++ local 'IFS= ' ++ '[' '!' -z '' ']' ++ export eval KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ KIWI_ALLOW_HOOK_CMD_setupUBoot=0 ++ HOOK=/kiwi-hooks/setupUBoot.sh ++ '[' '!' -e /kiwi-hooks/setupUBoot.sh ']' ++ HOOK=/lib/kiwi/hooks/setupUBoot.sh ++ '[' -e /lib/kiwi/hooks/setupUBoot.sh ']' ++ '[' '!' -z '' ']' ++ eval local 'call_cmd=$KIWI_ALLOW_HOOK_CMD_setupUBoot' +++ local call_cmd=0 **********************************************************************
How could we debug this? Check the initrd if the script is really included
gzip -cd <initrd> | cpio -it | grep setupUBoot.sh
It is in uImage format, so we need to remove headers before extract it with: sudo tail -c+65 < initrd.uboot | gunzip > /tmp/out gzip -cd /tmp/out | cpio -it | grep setupUBoot.sh which returns: kiwi-hooks/setupUBoot.sh 265320 blocs
So, it is here...
Moreover, second script installUBoot.sh is executed (but it is a bit later).
Full boot.kiwi log is there: http://paste.opensuse.org/90335031
I just rechecked and it seems that there is no /kiwi-hooks/ at all in initrd (seems I had a look at a previous initrd extraction, sorry) BUT installUBoot.sh is called. So, I guess this is from /kiwi-hooks/ from SD card.
Guillaume
Guillaume
If it does not exist at all check if the tarball providing the script(s) is bootincluded
<archive name="foo.tgz" bootinclude="true"/>
Yes : <archive name="uboot-setup-beaglebone.tgz" bootinclude="true"/>
Next check if the archive bundled the scripts correctly, should look like this:
tar -tf foo.tgz
kiwi-hooks/ kiwi-hooks/setupUBoot.sh
tar -tf uboot-setup-beaglebone.tgz kiwi-hooks/ kiwi-hooks/installUBoot.sh kiwi-hooks/setupUBoot.sh
If all that matches check the kiwi build log if you can see the "Installing archives" log information
Build log is here: https://build.opensuse.org/build/openSUSE:Factory:ARM/factory/armv7l/JeOS-be... I can see: [ 253s] Jun-07 19:57:50 <1> : Installing raw archives in: /usr/src/packages/KIWIROOT-oem... [ 253s] Jun-07 19:57:50 <1> : EXEC [chmod 755 /usr/src/packages/KIWIROOT-oem/screenrc.smart] [ 254s] + export PBL_SKIP_BOOT_TEST=1 [ 254s] + PBL_SKIP_BOOT_TEST=1 [ 254s] + trap clean INT TERM [ 254s] + for i in uboot-setup-beaglebone.tgz [ 254s] + grep -v '/$' [ 254s] + tar -tf /usr/src/packages/SOURCES/uboot-setup-beaglebone.tgz [ 254s] + for i in uboot-setup-beaglebone.tgz [ 254s] + tar -C /usr/src/packages/KIWIROOT-oem -xvf /usr/src/packages/SOURCES/uboot-setup-beaglebone.tgz [ 254s] kiwi-hooks/ [ 254s] kiwi-hooks/installUBoot.sh [ 254s] kiwi-hooks/setupUBoot.sh [ 254s] + echo 0 [ 254s] + exit 0 And: [ 285s] Jun-07 19:58:22 <1> : Reading contents of bootincluded packages/archives [ 285s] Jun-07 19:58:22 <1> : EXEC [rpm --root /usr/src/packages/KIWIROOT-oem -ql "dtb-am335x" 2>&1] [ 285s] Jun-07 19:58:22 <1> : --> got list from dtb-am335x [ 285s] Jun-07 19:58:22 <1> : EXEC [rpm --root /usr/src/packages/KIWIROOT-oem -ql "kernel-default" 2>&1] [ 286s] Jun-07 19:58:22 <1> : --> got list from kernel-default [ 286s] Jun-07 19:58:22 <1> : EXEC [rpm --root /usr/src/packages/KIWIROOT-oem -ql "u-boot-am335xevm" 2>&1] [ 286s] Jun-07 19:58:23 <1> : --> got list from u-boot-am335xevm [ 286s] Jun-07 19:58:23 <1> : --> got list from bootincluded_archives.filelist [ 286s] Jun-07 19:58:23 <1> : Checking for tools in bootincluded contents to keep [ 286s] Jun-07 19:58:23 <1> : --> no tools to keep Does it help you to find the problem? Guillaume
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi,
Full boot.kiwi log is there: http://paste.opensuse.org/90335031
There should be the message "Boot including archive(s) [bootstrap]: ..." But it's not there. However I can see the .kiwi file to have this archive boot included. Very strange. I'll test a local build Regards, Marcus -- Public Key available via: https://keybase.io keybase search marcus_schaefer ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE Linux GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg HRB: 21284 (AG Nürnberg) Germany GF: Felix Imendörffer, Jane Smithard GF: Dilip Upmanyu, Graham Norton http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 16:26, Marcus Schäfer a écrit :
Hi,
Full boot.kiwi log is there: http://paste.opensuse.org/90335031 There should be the message
"Boot including archive(s) [bootstrap]: ..."
But it's not there. However I can see the .kiwi file to have this archive boot included. Very strange. I'll test a local build
Ok. Thanks for having a look at it. Looking forward to get (good) news from you. ;) Guillaume
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi,
Le 08/06/2015 16:26, Marcus Schäfer a écrit :
Hi,
Full boot.kiwi log is there: http://paste.opensuse.org/90335031 There should be the message
"Boot including archive(s) [bootstrap]: ..."
But it's not there. However I can see the .kiwi file to have this archive boot included. Very strange. I'll test a local build
Ok. Thanks for having a look at it.
Looking forward to get (good) news from you. ;)
I found the bug in kiwi, not so good news, but I will fix it :-) new package submission will follow today... evening because I have another bug in the list which needs to be fixed Thanks and sorry for this one, it's a clear regression due to the changes in the <archive> handling Regards, Marcus -- Public Key available via: https://keybase.io keybase search marcus_schaefer ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE Linux GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg HRB: 21284 (AG Nürnberg) Germany GF: Felix Imendörffer, Jane Smithard GF: Dilip Upmanyu, Graham Norton http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Le 08/06/2015 17:03, Marcus Schäfer a écrit :
Hi,
Le 08/06/2015 16:26, Marcus Schäfer a écrit :
Hi,
Full boot.kiwi log is there: http://paste.opensuse.org/90335031 There should be the message
"Boot including archive(s) [bootstrap]: ..."
But it's not there. However I can see the .kiwi file to have this archive boot included. Very strange. I'll test a local build Ok. Thanks for having a look at it.
Looking forward to get (good) news from you. ;) I found the bug in kiwi, not so good news, but I will fix it :-)
It is still a good news. ;)
new package submission will follow today... evening because I have another bug in the list which needs to be fixed
Thanks and sorry for this one, it's a clear regression due to the changes in the <archive> handling
Ok. Thanks for your fix. Guillaume
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 08.06.2015 um 11:36 schrieb Guillaume Gardet:
Could you give us the kiwi version from working image, please?
That's what I found out of the image: kiwi_iversion='1.12.1' kiwi_revision='a1b5148889afb4530f8f202f4175f58e5c5bf171' Br, Frank -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi, kiwi 7.02.54 is building, do you need a factory submit request ? Regards, Marcus -- Public Key available via: https://keybase.io keybase search marcus_schaefer ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE Linux GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg HRB: 21284 (AG Nürnberg) Germany GF: Felix Imendörffer, Jane Smithard GF: Jennifer Guild, Dilip Upmanyu, Graham Norton http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi, Le 08/06/2015 22:48, Marcus Schäfer a écrit :
Hi,
kiwi 7.02.54 is building, do you need a factory submit request ?
Yes, please. Guillaume
Regards, Marcus
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (4)
-
Frank Kunz
-
Guillaume Gardet
-
Marcus Schäfer
-
Marcus Schäfer