Hi, I am trying to run openSUSE Leap 15 on Raspberry Pi 3. Yast does not find any audio devices to configure. Raspbian has no problem finding and using the audio out port. The sound module (snd-bcm2835) loads correctly but aplay finds only the HDMI audio. There is some advice in other forums about setting "amixer cset numid=3 1" to direct audio to the analog port but in opensuse amixer numid=3 seems to point to a volume control rather than a PCM device switcher. Is the analog port supported at this time? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: vc4hdmi [vc4-hdmi], device 0: MAI PCM vc4-hdmi-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 cat /proc/asound/devices 2: [ 0] : control 3: [ 0- 0]: digital audio playback 33: : timer -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org