[opensuse-arm] Raspi-OS 13.2: with FBAS connection
Hi, Raspi-friends. I am installing the 13.2-version for the raspberry. As a mostly operating in the text-mode, I am using a 7inch-monitor connected to the FBAS-connector. In works but on the left sind, the first 2 letters and on the bottom the last two lines are missing. Using the Raspberry with the Debian-Squueze OS, I changed settings in the /boot/boot.conf file. Who can I do it with the Raspi-OS13.2-version. Thanks for your advice Edgar, DJ3PU, Munich -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Edgar Dombrowski wrote:
Using the Raspberry with the Debian-Squueze OS, I changed settings in the /boot/boot.conf file.
Who can I do it with the Raspi-OS13.2-version.
You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt Ciao, Michael.
Am 15.01.2015 15:55, schrieb Michael Ströder:
Edgar Dombrowski wrote:
Using the Raspberry with the Debian-Squueze OS, I changed settings in the /boot/boot.conf file.
Who can I do it with the Raspi-OS13.2-version. You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt
Ciao, Michael.
Hi, Michael. Thank for your replay. I have looked into the boot-files, but there is no config.txt-file. But there are two text-files "boot.scr" and "boot.scrpt" . However I could not identify any informations for adjusting display. Have a good weekend Edgar, DJ3PU -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hi Edgar, Am 16.01.2015 um 13:38 schrieb Edgar Dombrowski:
Am 15.01.2015 15:55, schrieb Michael Ströder:
Edgar Dombrowski wrote:
Using the Raspberry with the Debian-Squueze OS, I changed settings in the /boot/boot.conf file.
Who can I do it with the Raspi-OS13.2-version. You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt
I have looked into the boot-files, but there is no config.txt-file. But there are two text-files "boot.scr" and "boot.scrpt" . However I could not identify any informations for adjusting display.
The RPi has three partitions, so /boot (where the above files are) is not /dev/mmcblk0p1 but mmcblk0p2. You need to mount mmcblk0p1 yourself to, e.g., /mnt. That file is not specific to openSUSE btw, it is read by the VideoCore IV firmware on that first FAT partition and is documented on elinux.org. Cheers, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Andreas Färber -
Edgar Dombrowski -
Michael Ströder