Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it? Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 20.03.2013, at 06:45, Peter Czanik wrote:
Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it?
We're in the process of verifying what hardware does work and what hardware doesn't :). So far we didn't get to the CuBox, but if you'd like to take on that challenge, I'd be more than happy :). Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 03/20/2013 02:45 AM, Peter Czanik wrote:
Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it? Bye, CzP
It currently works, sans video output whose drivers are in a sorry state, and to do anything useful with them, you need closed source components. I'm using this kernel http://www.cristianrodriguez.net/test/kernel-cubox-3.7.7-0.armv7hl.rpm and will soon publish an update ;-) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Hello, On 03/20/2013 07:29 AM, Cristian Rodríguez wrote:
On 03/20/2013 02:45 AM, Peter Czanik wrote:
Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it? Bye, CzP
It currently works, sans video output whose drivers are in a sorry state, and to do anything useful with them, you need closed source components.
I'm using this kernel http://www.cristianrodriguez.net/test/kernel-cubox-3.7.7-0.armv7hl.rpm and will soon publish an update ;-)
OK, let me know if you have anything available for testing. Right now I use the device as NAS with ArchLinux (I installed it to check some syslog-ng related problems, as I'm from syslog-ng upstream), but I'd be more comfortable to use openSUSE on it :) Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 03/20/2013 07:29 AM, Cristian Rodríguez wrote:
On 03/20/2013 02:45 AM, Peter Czanik wrote:
Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it? Bye, CzP
It currently works, sans video output whose drivers are in a sorry state, and to do anything useful with them, you need closed source components.
I'm using this kernel http://www.cristianrodriguez.net/test/kernel-cubox-3.7.7-0.armv7hl.rpm and will soon publish an update ;-)
Teseted image from http://download.opensuse.org/ports/armv7hl/distribution/12.3/images/openSUSE... and received on serial console: ===> Executing ext4load mmc 0:1 0x02000000 /boot.scr Device: MV_SDHCI Manufacturer ID: 2 OEM: 544d Name: SA04G Tran Speed: 25000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 3959422976 Bus Width: 4-bit Loading file "/boot.scr" from mmc device 0:1 mmcda1 641 bytes read ## Executing script at 02000000 ## Error: "kerneladdr" not defined ## Error: "ramdiskaddr" not defined Loading file "boot/linux.vmx" from mmc device 0:1 (mmcda1) 3913168 bytes read Loading file "boot/initrd.uboot" from mmc device 0:1 (mmcda1) 33463386 bytes read ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.7.10-1.1-cubox Created: 2013-03-02 15:40:16 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3913104 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 05000000 ... Image Name: Initrd Created: 2013-03-26 22:27:26 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 33463322 Bytes = 31.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 27.03.2013, at 12:48, Peter Czanik wrote:
On 03/20/2013 07:29 AM, Cristian Rodríguez wrote:
On 03/20/2013 02:45 AM, Peter Czanik wrote:
Hello, What's the current status of CuBox support? I see that 12.2 should work: https://en.opensuse.org/HCL:CuBox But does 12.3 also support it? Bye, CzP
It currently works, sans video output whose drivers are in a sorry state, and to do anything useful with them, you need closed source components.
I'm using this kernel http://www.cristianrodriguez.net/test/kernel-cubox-3.7.7-0.armv7hl.rpm and will soon publish an update ;-)
Teseted image from http://download.opensuse.org/ports/armv7hl/distribution/12.3/images/openSUSE... and received on serial console:
===> Executing ext4load mmc 0:1 0x02000000 /boot.scr Device: MV_SDHCI Manufacturer ID: 2 OEM: 544d Name: SA04G Tran Speed: 25000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 3959422976 Bus Width: 4-bit Loading file "/boot.scr" from mmc device 0:1 mmcda1 641 bytes read ## Executing script at 02000000 ## Error: "kerneladdr" not defined ## Error: "ramdiskaddr" not defined Loading file "boot/linux.vmx" from mmc device 0:1 (mmcda1) 3913168 bytes read Loading file "boot/initrd.uboot" from mmc device 0:1 (mmcda1) 33463386 bytes read ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.7.10-1.1-cubox Created: 2013-03-02 15:40:16 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3913104 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 05000000 ... Image Name: Initrd Created: 2013-03-26 22:27:26 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 33463322 Bytes = 31.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Is the console= parameter correct? Alex
Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 03/27/2013 12:59 PM, Alexander Graf wrote:
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Is the console= parameter correct?
How can I check it? I just downloaded the image, dd-d it and booted... Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 27.03.2013, at 13:28, Peter Czanik wrote:
On 03/27/2013 12:59 PM, Alexander Graf wrote:
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Is the console= parameter correct?
How can I check it? I just downloaded the image, dd-d it and booted...
Hrm. The first thing to check would be the boot.script on the sd card :) Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 03/27/2013 01:30 PM, Alexander Graf wrote:
On 27.03.2013, at 13:28, Peter Czanik wrote:
On 03/27/2013 12:59 PM, Alexander Graf wrote:
Starting kernel ...
Uncompressing Linux... done, booting the kernel. Is the console= parameter correct? How can I check it? I just downloaded the image, dd-d it and booted... Hrm. The first thing to check would be the boot.script on the sd card :)
Alex
It's " console=ttyS0,115200n8 ", which seems to be the same as in the working Arch Linux image on the CuBox. Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Alexander Graf -
Cristian Rodríguez -
Peter Czanik