Am 23.11.2014 um 06:37 schrieb lists
On Sat, 22 Nov 2014 14:25:31 -0800
lists <lists(a)lazygranch.com> wrote:
> On Sun, 23 Nov 2014 01:09:20 +0400
> "Matwey V. Kornilov" <matwey.kornilov(a)gmail.com> wrote:
>> 2014-11-23 0:00 GMT+03:00 Zack Piper <zack(a)apertron.net>et>:
>>> On Sun, Nov 23, 2014 at 12:50:44AM +0400, Matwey V. Kornilov
>>>> 2014-11-22 23:44 GMT+03:00 Zack Piper <zack(a)apertron.net>et>:
>>>>> The BeagleBone Black JeOS image, I have not been using the boot
>>>>> switch button, I have tried it, no LEDs lightup.
>>>> Which version? 13.1 13.2 Factory?
>>>>> Another qustion, does the openSUSE image automatically activate
>>>>> a tty-over-USB at all?
>>>> With best regards,
>>>> Matwey V. Kornilov
>>> Oops, sorry, I am using 13.2.
>> Hm, I've tried this couple hours ago, it worked. However, first
>> boot takes several minutes.
>>> Is there a guide on enabling tty-over-USB?
>> It is disabled in config, I don't know why.
> I see a new image (26.3 of JEOS 13,2) has been uploaded. I'm
> downloading it now, will flog it and report my findings. Note
> there is no sha256 for the download.
> However just to be clear, on rev 26.2, the USB was totally not
> functional. It would not recognize usb devices plugged into it.
> lsusb only detected the usb chip on the SBC,
> There is some confusion on the interwebs about which serial cable
> to get. I can say the FTDI one from Adafruit works fine. But the
> ethernet connection worked on the initial installation, so if
> somebody got lucky, they wouldn't need the serial cable. You would
> be installing the OS in the blind, which is why I mentioned luck.
The 26.3 rev has issues. The serial port doesn't work well. This
problem wasn't evident in the 26.2 rev. USB still doesn't work.
Looks like it's working to me ;). The serial port issues usually come
from a loose cable. If you press against the serial pin connectors
they should go away.