On Sun, 23 Nov 2014 01:09:20 +0400
"Matwey V. Kornilov" <matwey.kornilov(a)gmail.com> wrote:
2014-11-23 0:00 GMT+03:00 Zack Piper
On Sun, Nov 23, 2014 at 12:50:44AM +0400, Matwey
V. Kornilov wrote:
2014-11-22 23:44 GMT+03:00 Zack Piper
The BeagleBone Black JeOS image, I have not been
using the boot
switch button, I have tried it, no LEDs lightup.
Which version? 13.1 13.2 Factory?
Another qustion, does the openSUSE image
a tty-over-USB at all?
With best regards,
Matwey V. Kornilov
Oops, sorry, I am using 13.2.
Hm, I've tried this couple hours ago, it worked. However, first boot
takes several minutes.
Is there a guide on enabling tty-over-USB?
It is disabled in config, I don't know why.
I see a new image (26.3 of JEOS 13,2) has been uploaded. I'm
downloading it now, will flog it and report my findings. Note there is
no sha256 for the download.
However just to be clear, on rev 26.2, the USB was totally not
functional. It would not recognize usb devices plugged into it. lsusb
only detected the usb chip on the SBC,
There is some confusion on the interwebs about which serial cable to
get. I can say the FTDI one from Adafruit works fine. But the ethernet
connection worked on the initial installation, so if somebody got
lucky, they wouldn't need the serial cable. You would be installing
the OS in the blind, which is why I mentioned luck.
To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org