Hi, I run into a problem with my RasPi Model B+ V1.2 with openSuse 13.2. I type: raspi:~ # cat /proc/cpuinfo processor : 0 model name : ARMv6-compatible processor rev 7 (v6l) Features : swp half thumb fastmult vfp edsp java tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xb76 CPU revision : 7 Hardware : BCM2835 Revision : 0000 Serial : 0000000000000000 From serveral other sources I heard that Hardware should be BCM2708, Revision 0010 and there should be a valid serial number. The same hardware with raspbian says: Hardware : BCM2708 Revision : 0010 Serial : 00000000c2c2clcfbb The problem is that many libs are looking into this information to determine what type of raspi they are running on. Furthermore serial not set properly means that raspi does not have a stable MAC. Every time you boot it has another MAC. Any suggestions how I can fix this? -- Viele Grüße Thomas Aichinger ---------------------------- http://www.datamagic.at ---------------------------- Data Magic Datenservice GmbH Schönbrunner Straße 140 1120 Wien -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org