Op vrijdag 11 maart 2016 14:31:23 schreef Freek de Kruijf:
Op donderdag 10 maart 2016 09:22:39 schreef Guillaume Gardet:
Thanks for the fix! I accepted your SR to Base:System/u-boot. It is on the way to Factory.
Guillaume
I just tested JeOS 2016.03.09-Build5.1, but a reboot does not boot the system anymore, like before. It tries to boot via the network.
I now have a USB serial interface to connect to the GPIO pins 13 14 and 15. Will try this and hope to be able to give printenv.
I succeeded in getting the output of printenv after interrupting the U-boot process using Build389.1, which is working and the non-working 2016.03.09- Build5.1. It is an attachment, but I am not sure it will get through, so I also have it appended in this text. --- wrong_image.txt 2016-03-11 15:36:31.473062507 +0100 +++ working_image.txt 2016-03-11 15:41:51.459094684 +0100 @@ -1 +1 @@ -U-Boot 2016.03-rc3 (Mar 07 2016 - 19:13:07 +0000) +U-Boot 2016.03-rc2 (Feb 26 2016 - 21:55:58 +0000) @@ -32 +31,0 @@ -boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; bootefi ${kernel_addr_r} @@ -34,0 +34 @@ +boot_prefixes=/ /boot/ @@ -46 +45,0 @@ -efi_dtb_prefixes=/ /dtb/ /dtb/current/ /boot/ /boot/dtb/ /boot/dtb/current/ @@ -54 +52,0 @@ -load_efi_dtb=load ${devtype} ${devnum}:2 ${fdt_addr_r} ${prefix}${fdtfile}; fdt addr ${fdt_addr_r} @@ -60 +58 @@ -scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; +scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done @@ -62 +59,0 @@ -scan_dev_for_efi=for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:2 ${prefix}${fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; boot_prefixes=/ /boot/ @@ -66 +62,0 @@ -serial#=00000000b6c0717f @@ -75 +71 @@ -Environment size: 3115/16380 bytes +Environment size: 2419/16380 bytes -- fr.gr. member openSUSE Freek de Kruijf