On Thu 16 Aug 2018 01:22:17 PM CDT, Alexander Graf wrote:
On 08/16/2018 10:13 AM, Volker Kuhlmann wrote:
See $SUBJECT - the Leap 15.0 JeOS image fails to boot.
openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
dd the .raw to a 16GB micro SD card on a linux desktop computer.
Check the config.txt:
mount /dev/sd_usb3_uSD2 /mnt -r
/mnt/boot/vc/config.txt contains arm_control=0x200 (Ugh, mount point not empty)
mount /dev/sd_usb3_uSD1 /mnt/boot/ -r
/mnt/boot/config.txt contains arm_control=0x200
The last 2 blocks of the micro SD card are zeroes.
Powerup: Green LED flashes briefly, colourwheel screen shows + disappears, stuck, with screen showing Net: No ethernet found. starting USB... USB0: Core release: 2.80a scanning bus 0 for devices...
(After over an hour I gave up; it'd be useless anyway if it took that long to boot.)
This sounds like the U-Boot USB stack is unhappy about something on your USB bus. What devices do you have connected via USB to your RPi3? Can you try to unplug all and see how far you get?
Alex
Hi I have that with my TW JeOS on USB device, at u-boot a usb reset normally sorts it out... starting USB... USB0: scanning bus 0 for devices... usb_new_device: Cannot read configuration, skipping device 13fe:5500 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 U-Boot> usb reset resetting USB... USB0: scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found U-Boot> boot -- Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) SLES 15 | GNOME Shell 3.26.2 | 4.12.14-25.6-default HP 255 G4 Notebook | E2-7110 X4 @ 1.80 GHz | AMD Radeon R3 up 9 days 9:55, 2 users, load average: 3.45, -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org