Am 30.07.18 um 22:18 schrieb Malcolm:
On Mon 30 Jul 2018 09:38:55 PM CDT, Sten Bert wrote:
Am 30.07.18 um 20:42 schrieb Andreas Färber:
Am 30.07.2018 um 07:33 schrieb Sten Bert:
Here's my result for Leap 15.0 from http://download.opensuse.org/ports/aarch64/distribution/leap/15.0/appliances...:
xzcat openSUSE-Leap15.0-ARM-JeOS-efi.aarch64-2018.07.02-Buildlp150.1.1.install.tar.xz | dd bs=4M of=/dev/sdf iflag=fullblock oflag=direct; sync .tar.xz != .raw.xz And that's not a -raspberrypi3 image either.
If you dd the wrong file it can't possibly work. :)
openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz
- booted after activating 1st partition as active, but stopped with "incompatible licence, Press any key to continue" Don't understand what exactly you're doing there and where exactly you're seeing that message.
- with and without extraconfig.txt If it boots, you don't have to touch extraconfig.txt. You only need that if ubootconfig.txt with that contents is missing (it was moved from one file to another and - Murphy's Law - the Tumbleweed image got published in between).
Cheers, Andreas
P.S. Please don't top-post. SUCCESS - SUCCESS - SUCSESS - SUCCESS
Andreas you're so right, taking the "Raspberry3"-named images worked!
The challenge was to find out the right image for the RPi3B+ among the plenty of ARM images. Following results for systematic attempts on 2 Raspberry3 images from http://download.opensuse.org/ports/aarch64: Valid for all: arm_control=0x200 is already in config.txt (no extraconfig.txt necessary)
1) Leap 15.0 JeOS: openSUSE-Leap15.0-ARM-JeOS-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz.part - booting to login prompt - wonderful!
2) Leap 15.0 LXQT: openSUSE-Leap15.0-ARM-LXQT-raspberrypi3.aarch64-2018.07.02-Buildlp150.1.1.raw.xz - "You are in emergency mode. ..." - Timed out waiting for device dev-disk-by\x2duuid-9982\x2d4ABD.device. - Dependency failed for /boot/efi. - Dependency failed for Local File Systems.
- after several attempts - success
I have some trouble in the LXQt DE with "libEGL warning: DRI2: failed to authenticate" - but I think this sould ba a separate thread.
Alessio, thanks for your help, but unfortunately I could only get JeOS. osc getbinaries openSUSE:Factory:ARM:Live X11:X11-raspberrypi3.aarch64 images aarch64 Server returned an error: HTTP Error 404: Not Found
Regards
Hi That's because the prefix is JeOS not X11 ;) <osc getbinaries openSUSE:Factory:ARM:Live JeOS:X11-raspberrypi3.aarch64 images aarch64>
A quick browse on OBS openSUSE:Factory:ARM:Live soon figured that out....
FWIW, you may be interested in this forum thread as well; http://forums.opensuse.org/showthread.php?t=531539
Hi Malcolm, ... very, very interesting thread! It shows, that this subject (openSUSE on RasPI) becomes relevant for more an more people. I continue reading there. Alessio, never mind! I still have to learn a lot about OBS (noob status). Regards, Sten Bert -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org