Op vrijdag 11 maart 2016 13:33:08 schreef Alexander Graf:
On 11.03.16 13:07, Freek de Kruijf wrote:
Op vrijdag 11 maart 2016 12:33:14 schreef Alexander Graf:
On 11.03.16 10:44, Freek de Kruijf wrote:
Op donderdag 10 maart 2016 13:28:08 schreef Guillaume Gardet:
Hi,
Le 10/03/2016 12:53, Freek de Kruijf a écrit :
Is there any support for the RPi camera in the openSUSE software for a Raspberry Pi? I tried to find sources, but did not succeed.
What do you need?
raspberrypi-userland package provide some RPi tools such as: * raspistill * raspivid * raspividyuv * raspiyuv
Otherwise, standard tool whould work too.
Guillaume
Thanks, one step further. I installed raspberrypi-userland and used the command "raspistill -o
" and got the message: mmal: mmal_component_create_core: could not find component 'vc.ril.camera' mmal: Failed to create camera component mmal: main: Failed to create camera component mmal: Camera is not enabled in this build. Try running "sudo raspi-config" and ensure that "camera" has been enabled
The bash script raspi-config I found seems to be written for Raspian. On openSUSE it seems to do nothing.
How to continue?
Just a guess into the blue, but maybe the missing part is a device tree entry for the camera. Or just a random Config.txt option.
I found to insert in /boot/efi/Config.txt:
# Enable the camera module start_x=1 # Turn off the red camera LED when recording video or taking a still picture disable_camera_led=1
Also appended the following line to /etc/modprobe.d/99-local.conf:
install bcm2835-v4l2 /bin/true
This provides the device /dev/video0
and enabled vcfiled via
systemctl enable vcfiled.service
which will start this service after a reboot or after a start command.
But still raspistill gives:
mmal: mmal_component_create_core: could not find component 'vc.ril.camera' mmal: Failed to create camera component mmal: main: Failed to create camera component mmal: Failed to run camera app. Please check for firmware updates
Do normal v4l accessing tools work? Like xawtv?
Alex
xawtv pulled in 70 packages. Running "xawtv -hwinfo" showed the error message:
This is xawtv-3.103, running on Linux/armv7l (3.18.14-5-rpi2)
Error: Can't open display:
which makes sense because I do not have an X display.
Also "raspistill -o