From looking around it appears one needs kernel, initrd and DTB separately. So I
Hello all, I'm trying to get an openSUSE image for Raspberry Pi2 going in QEMU. But everything I've tried so far didn't work. --> I'd greatly appreciate any hints or pointers where to perform an RTFM. I started at https://en.opensuse.org/HCL:Raspberry_Pi2 with this image openSUSE-Leap15.0-ARM-JeOS-raspberrypi2.armv7l-2018.07.02-Buildlp150.1.1.raw peeled them off the image and tried booting like this: --- snip --- INITRD=initrd-4.12.14-lp150.11-lpae KERNEL=zImage-4.12.14-lp150.11-lpae DTB=bcm2709-rpi-2-b.dtb HDDIMG=openSUSE-Leap15.0-ARM-JeOS-raspberrypi2.armv7l-2018.07.02-Buildlp150.1.1.raw qemu-system-arm \ -M raspi2 \ -kernel ${KERNEL} \ -initrd ${INITRD} \ -dtb ${DTB} \ -append "rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2" \ -drive if=sd,format=raw,file=${HDDIMG} --- snap --- But this only gives a blank screen in the QEMU window (also on the serial console) and 100% CPU usage. I've tried a few variations but the symptoms stay the same. So how do I start one of the openSUSE images for Raspberry Pi2 in QEMU? Thanks and regards -- Till -- Dipl.-Inform. Till Dörges doerges@pre-sense.de Tel. +49 - 40 - 244 2407 - 0 Fax +49 - 40 - 244 2407 - 24 PRESENSE Technologies GmbH Sachsenstr. 5, D-20097 HH Geschäftsführer/Managing Directors AG Hamburg, HRB 107844 Till Dörges, Jürgen Sander USt-IdNr.: DE263765024 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org