![](https://seccdn.libravatar.org/avatar/892bf3b848428f95cf1a3fb35cde3f58.jpg?s=120&d=mm&r=g)
Hi, After succeeding in getting wifi enabled on the pi 3 (see my previous posting 6th of nov., 20:31 WET, and follow ups) the next problem arises: every 5 minutes the wifi connection gets another hw-address, and hence another ip address... Rather inconvenient. Dmesg spits out the following: [ 1306.573949] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1306.576314] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 1306.576327] cfg80211: World regulatory domain updated: [ 1306.576341] cfg80211: DFS Master region: unset [ 1306.576341] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1306.576347] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1306.576352] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1306.576355] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1306.576359] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1306.576362] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1306.576366] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1306.576370] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1306.576373] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1307.277503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1622.583086] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1622.585585] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 1622.585603] cfg80211: World regulatory domain updated: [ 1622.585611] cfg80211: DFS Master region: unset [ 1622.585611] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1622.585618] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1622.585623] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1622.585626] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1622.585630] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1622.585634] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1622.585637] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1622.585641] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1622.585644] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1623.287611] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1938.580273] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1938.587515] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 1938.587571] cfg80211: World regulatory domain updated: [ 1938.587604] cfg80211: DFS Master region: unset [ 1938.587604] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1938.587617] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1938.587633] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1938.587654] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1938.587666] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1938.587676] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1938.587687] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1938.587694] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1938.587705] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1939.294771] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2083.905735] fuse init (API version 7.23) [ 2254.629486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2254.631800] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 2254.631815] cfg80211: World regulatory domain updated: [ 2254.631823] cfg80211: DFS Master region: unset [ 2254.631823] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2254.631828] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2254.631833] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2254.631836] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2254.631840] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2254.631844] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2254.631847] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2254.631850] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2254.631853] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2255.303333] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ================================================================ ever going. What is going on here, and what can be done? Of course I did some googling, but I didn't find anything alike... Regards, Jogchum -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org