March 2018 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] cubox-i / leap 42.3: problems with automatic module loading after upgrade
by Miklos Vajna 13 Apr '19

13 Apr '19

Hi, Just asking if this is only me or it's a wider problem: I recently updated my cubox-i with zypper, pulling in kernel-default-4.4.114, and after reboot the box boots, but several drivers are missing, so there is no wired ethernet, no mmcblk, etc. After booting and waiting for a while, dmesg starts to complain about driver detection did not finish in time (sadly I don't have the backtrace at hand, it already went out of the buffer of the serial console). For now I worked around the problem this way: - download the repo-oss (ie. non-update) kernel-default-4.4.76 rpm on an other machine, copied it to an usb stick - install the old kernel-default from the usb stick - copy the /boot from the root fs to the usb stick - use the other machine to update the /boot on the mmcblk device where u-boot reads it So is this only me or do other cubox-i users see the same? Thanks, Miklos

2 3

[opensuse-arm] Raspberry Pi 1 and 2 boot failed - Initramfs unpacking failed: write error
by Kasimir _ 17 Apr '18

17 Apr '18

Both abort the boot process with the message: "Initramfs unpacking failed: write error" Raspberry Pi 1: - Image: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2018.03.19-Build1.1.raw.xz - Console output: https://paste.opensuse.org/5939196 Raspberry Pi2: - Image: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2018.03.19-Build1.1.raw.xz - Console output: https://paste.opensuse.org/77297849 N��r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0��Ǩ�

5 7

[opensuse-arm] libieee.a not being found
by Russell Standish 03 Apr '18

03 Apr '18

I'm getting the error message on ARM builds: 326s] /usr/lib64/gcc/aarch64-suse-linux/7/../../../../aarch64-suse-linux/bin/ld: cannot find -lieee See https://build.opensuse.org/package/live_build_log/home:hpcoder1/ecolab/open… libieee is part of glibc, so should always be available. The dependency is coming in through the TCL linker flags. Something is askew with the ARM build service. -- ---------------------------------------------------------------------------- Dr Russell Standish Phone 0425 253119 (mobile) Principal, High Performance Coders Visiting Senior Research Fellow hpcoder(a)hpcoders.com.au Economics, Kingston University http://www.hpcoders.com.au ---------------------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Chromebook builds disabled?
by Daniel Bischof 30 Mar '18

30 Mar '18

Hi, checked for changes in https://build.opensuse.org/package/view_file/openSUSE:Factory/u-boot-snow/u… yesterday, and there's an update that may fix the ongoing boot issues on my Chromebook (Snow). However, the JeOS-images for Snow haven't been rebuilt for more than one month: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Chr… Intention or mistake? Best regards, --D. --- Daniel Bischof <suse-bugz(a)bischof.org> -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] mono-core build fails for AArch64 in OBS only
by Guillaume Gardet 27 Mar '18

27 Mar '18

Hi, mono-core build fails for AArch64 in OBS due to an unhandled exception. Log: [1] Locally it builds fine with "osc build", both chroot and KVM. Any idea what could be wrong with the OBS workers? Guillaume [1]: https://build.opensuse.org/build/openSUSE:Factory:ARM/standard/aarch64/mono… -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] _constraints file for kiwi images?
by Guillaume Gardet 27 Mar '18

27 Mar '18

Hi, Some ARM images are failing to build because they run out of disk space. Is the _constraints file working for kiwi image builds in OBS? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Factory ARM packages failing due to wrong rpmlint errors on licenses
by Guillaume Gardet 22 Mar '18

22 Mar '18

Hi, Currently, some packages are failing in Factory ARM (aarch64 and armv6 only, armv7 seems to be ok) because of wrong rpmlint errors on licenses such as : invalid-license (Badness: 100000) GPL-2.0-or-later I guess rpmlint used on OBS workers for aarch64 and armv6 should be updated? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] File openSUSE...Current.raw.xz.sha256 used to have filename of ...raw.xz in it
by Freek de Kruijf 21 Mar '18

21 Mar '18

I used to download files with names openSUSE...Current.raw.xz.sha256 and found in line 4 not only the sha256 sum but also the name of the image with the date and Build number followed the sha256 sum. At least for Tumbleweed-ARM-JeOS for Raspberry Pi 1 and 2 this is no longer the case. Only the sha256 sum is present. For the Raspberry Pi 3 this still is the case. Is it possible to include that name in the ...Current.raw.xz.sha256 files? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] After zypper dup to TW20180305 and reboot zypper no longer works
by Freek de Kruijf 12 Mar '18

12 Mar '18

I used image openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.aarch64-2018.02.02- Build1.2.raw.xz to build a new Raspberry Pi 3B system and performed a "zypper dup --no-recommends" to TW20180305. Even before a reboot zypper does not work anymore. It stops on a segmantation fault. The basic system seems to work OK. However using git gives a coredump of git. Also wget. However rsync, which I installed before the upgrade still works. So I downloaded strace-4.21-1.1.aarch64.rpm and used rsync to get it in the RPi3. I installed it and used "strace zypper se git" to get an strace. Did not give a clue to me about what caused the segmentation fault. Last part is: write(3, "2018-03-12 12:02:53 <1> rpi3tumh"..., 164) = 164 openat(AT_FDCWD, "/dev/null", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4 openat(AT_FDCWD, "/var/lib/YaST2/cookies", O_RDONLY) = -1 ENOENT (No such file or directory) mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0xffff870a6000 mprotect(0xffff870a7000, 8388608, PROT_READ|PROT_WRITE) = 0 clone(child_stack=0xffff878a3820, flags=CLONE_VM|CLONE_FS|CLONE_FILES| CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID| CLONE_CHILD_CLEARTID, parent_tidptr=0xffff878a3fe0, tls=0xffff878a4600, child_tidptr=0xffff878a3fe0) = 1045 ppoll(NULL, 0, {tv_sec=0, tv_nsec=4000000}, NULL, 0) = 0 (Timeout) ppoll(NULL, 0, {tv_sec=0, tv_nsec=8000000}, NULL, 0) = 0 (Timeout) ppoll(NULL, 0, {tv_sec=0, tv_nsec=16000000}, NULL, 0 <unfinished ...>) = ? +++ killed by SIGSEGV (core dumped) +++ Bug report: https://bugzilla.opensuse.org/show_bug.cgi?id=1084796 I do have coredumps and can produce a full strace. Please advice. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] http://download.opensuse.org/ports/aarch64/debug/tumbleweed is missing
by Andreas Schwab 11 Mar '18

11 Mar '18

... and the last published snapshot is Build20170831. This may be related. Andreas. -- Andreas Schwab, SUSE Labs, schwab(a)suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different." -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4

[opensuse-arm] rock64
by Matwey V. Kornilov 10 Mar '18

10 Mar '18

Hello, I will receive my rock64 board soon. https://www.pine64.org/?page_id=7147 I would like to run some openSUSE on it. There are no upstream support but lets see what we could do. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

8 58

[opensuse-arm] initrd.vmx bloated
by Matwey V. Kornilov 09 Mar '18

09 Mar '18

Hi, initrd.vmx is almost 100MB big in JeOS-espressobin.aarch64-2018.03.07-Build3.4 (and other images). It is almost 1GB when uncompressed and the image is not bootable due ot it. There are 500 MB of /usr/lib/locale files inside initrd. Could somebody drop them out of initrd? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] JeOS-efi.aarch64-2018.03.07-Build2.1.raw: Invalid FAT entry
by Matwey V. Kornilov 07 Mar '18

07 Mar '18

Hello, I am trying to use openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64-2018.03.07-Build2.1.raw to run Rock64. I use manually compiled u-boot 2018.01-rc2-02249-g19e31fac0d-dirty and see the following: => load mmc 1:1 0x02000000 efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi MMC: block number 0x100008005 exceeds max(0x1dacc00) MMC: block number 0x100008005 exceeds max(0x1dacc00) Invalid FAT entry 6144 bytes read in 11 ms (544.9 KiB/s) This didn't happen when we used kiwi-7 to build JeOS at Factory. Can it be some issue with FAT16/FAT32? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5