October 2014 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] CuBox
by Peter Czanik 24 Oct '14

24 Oct '14

Hi, Anybody still using CuBox? I mean the old one: https://en.opensuse.org/HCL:CuBox openSUSE 12.2 seems to be a bit old :( Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] [PATCH] Disable Exynos cpufreq modules
by Dirk Müller 24 Oct '14

24 Oct '14

3 3

[opensuse-arm] zram
by David Byte 23 Oct '14

23 Oct '14

Is there a chance of getting our Rpi kernel to build with zram enabled (as a module) for factory? When I first built my Rpi a year ago, I had it and it does make a significant difference in performance. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] libGL.so.1 w/xfce4 on opensuse 13.1
by David Byte 22 Oct '14

22 Oct '14

I am fighting mightily trying to not do something very nasty to get xfce4 to work on the 13.1 factory build. I have removed the Mesa packages and installed raspberrypi-gfx, but when I try to start xfce4-session I get file not found for libGL.so.1 I fixed this once about a year ago, but did not document what I did (duh). Can someone provide a little insight? David Byte Sr. Technology Strategist, OEM SUSE dbyte(a)suse.com (P)918.528.4422 www.suse.com https://www.suse.com/partners/integrated-systems/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] openSUSE JeOS Factory Build 207 not booting on Raspberry Pi
by Alex Armstrong 19 Oct '14

19 Oct '14

Greetings, I had a chance to test JeOS Factory Build 207.2 (13-Sep-14) on the Pi this weekend and found it didn't boot. U-boot loads. It looks for /uEnv.txt, fails to find it. U-boot next looks for, and finds /boot.scr. It reads and executes the scrip. Then this happens: ----- switch to partitions #0, OK mmc is current device ** File not found boot/linux.vmx ** SCRIPT FAILED: continuing... ** Bad Partition specification mmc 0:0:2 ** ** Bad Partition specification mmc 0:0:2 ** ** Bad Partition specification mmc 0:0:2 ** U-Boot> ----- There is a linux.vmx at the top level of the boot partition - so maybe a script path problem? -A -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 19

Re: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
by Matwey V. Kornilov 18 Oct '14

18 Oct '14

You said that the system did not boot. So I checked. It boots for me. There is difference between the first and the sequential boots, so I checked that it was able to reboot successfully. HDMI is not related here. 2014-10-18 20:51 GMT+04:00 <lists(a)lazygranch.com>: > I wrote over the SDHC with a different disty, though I can load opensuse again. But before I do that, I want to be clear what I'm supposed to document. > > First I presume this is just with the image, that is, don't upgrade. > > So the idea is if I boot twice, the HDMI returns? > > So the plan is to load the image, use the ncurses installer, and save whatever is dumped via the serial port while it boots. Then do I use the reboot command? Or do I hit the reset button. Assuming it boots, I then save the serial port dump. > > Sorry for the top post, but I'm on a smartphone. > > Original Message > From: Matwey V. Kornilov > Sent: Saturday, October 18, 2014 2:53 AM > To: opensuse-arm(a)opensuse.org > Subject: [opensuse-arm] Re: no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz > > > Hi > > openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw > > second-boots fine, just checked. Could you show full log of the first boot? > > > 14.10.2014 05:17, lists пишет: >> On Mon, 13 Oct 2014 01:19:16 -0700 >> lists <lists(a)lazygranch.com> wrote: >> >>> The title says it all. No HDMI on this specific build. >>> openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz >>> >>> Otherwise, it boots/runs. I'm going to flog it a bit more. >> >> This image seems to have other problems. I used zypper update, then >> issued the reboot command. The display on the serial port got to >> "starting kernel" and just froze there. >> >> I did a reboot by hand (i.e. hold the boot button and apply power). >> --------------------------------------------- >> U-Boot 2013.04 (Mar 17 2014 - 15:34:07) >> >> I2C: ready >> DRAM: 512 MiB >> WARNING: Caches not enamusb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, >> HB-ISO Rx, HB-ISO Tx, SDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 >> musb-hdrc: 28/31 max ep, 16384/16384 memory >> USB Peripheral mode controller at 47401000 using PIO, IRQ 0 >> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, >> SoftConn) musb-hdrc: MHDRC RTL version 2.0 >> musb-hdrc: setup fifo_mode 4 >> musb-hdrc: 28/31 max ep, 16384/16384 memory >> USB Host mode contnot set. Validating first E-fuse MAC >> cpsw, usb_ether >> Hit any key to stop autoboot: 0 >> mmc0 is current device >> SD/MMC found on device 0 >> 1950 bytes read in 6 ms (317.4 KiB/s) >> Running bootscript from mmc0 ... >> ## Executing script at 80200000 >> kerneladdr=0x802000004504224 bytes read in 609 ms (7.1 MiB/s) >> ** File not found initrd ** >> 21959 bytes read in 24 ms (892.6 KiB/s) >> ## Flattened Device Tree Tree in pla885c6 >> >> Starting kernel ... >> >> ------------------------------ >> Again, nothing happens. To be sure, I went to the HDMI port, just to >> see if the display got transferred there, and again, nothing. >> >> At this point, I'm going to halt testing and wait until someone thinks >> there is an image with HDMI support. >> > > > -- > To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org > -- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] no HDMI on openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz
by lists 18 Oct '14

18 Oct '14

The title says it all. No HDMI on this specific build. openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz Otherwise, it boots/runs. I'm going to flog it a bit more. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] opensuse 13.1: JeOSes are broken
by Matwey V. Kornilov 18 Oct '14

18 Oct '14

Hi, Could someone look after JeOSes in openSUSE:13.1:Ports? They are failed with the following output: [ 90s] Problem: nothing provides /usr/bin/python needed by wpa_supplicant-2.0-3.1.1.armv7hl [ 90s] Problem: yast2-firstboot-3.0.1-2.1.4.noarch requires yast2 >= 2.16.23, but this requirement cannot be provided [ 90s] Problem: nothing provides /usr/bin/python needed by bind-utils-9.9.3P2-2.1.1.armv7hl [ 90s] [ 90s] Problem: nothing provides /usr/bin/python needed by wpa_supplicant-2.0-3.1.1.armv7hl [ 90s] Solution 1: do not install wpa_supplicant-2.0-3.1.1.armv7hl [ 90s] Solution 2: break wpa_supplicant-2.0-3.1.1.armv7hl by ignoring some of its dependencies [ 90s] [ 90s] Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): c [ 90s] Sep-22 15:12:27 <1> : EXEC [rm -f /usr/src/packages/KIWIROOT-tbz/screenrc.smart*] [ 90s] + ECODE=4 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] iMX USB Loader tool (for iMX.5/6 or Vybrid board)
by Guillaume Gardet 16 Oct '14

16 Oct '14

Hi, I added a wiki page on the iMX USB Loader tool: https://en.opensuse.org/openSUSE:Imx_usb_loader It allows to load a binary file in RAM using USB or UART and to execute it. It can be used to unbrick your iMX.5/6 or Vybrid board. Or just to try a new u-boot. It is available on hardware OBS project and should be added to Factory soon. I tested it successfully on a Sabre Lite board (iMX.6) using USB. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Beaglebone black with no HDMI output
by Alexjan Carraturo 15 Oct '14

15 Oct '14

Hi to all I try to setup openSUSE 13.1 on my Beaglebone Black. I follow the procedure described in this page: https://en.opensuse.org/HCL:BeagleBone_Black I choose the XFCE image (openSUSE-13.1-ARM-XFCE-beaglebone.armv7l-1.12.1-Build40.18). This works and it's cool; easy and powerful. The system start, and the yast configuration works (via serial console). But, even if the system seems to be perfectly working and the hdmi cable it`s connected to monitor, the monitor said me "No Signal" Someone have advice to let the monitor hdmi work correctly? I tried another image (openSUSE-Factory-ARM-E17-beaglebone.armv7l-1.12.1-Build224.4) but this doesn't boot and stops here Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 2261 bytes read in 14 ms (157.2 KiB/s) Running bootscript from mmc0 ... ## Executing script at 82000000 switch to partitions #0, OK mmc0 is current device 5575752 bytes read in 353 ms (15.1 MiB/s) 57450503 bytes read in 3350 ms (16.4 MiB/s) 33138 bytes read in 33 ms (980.5 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x551448 ] ## Loading init Ramdisk from Legacy Image at 88080000 ... Image Name: Initrd Created: 2014-10-10 6:33:40 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 57450439 Bytes = 54.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b171 Starting kernel ... Thanks in advance bye Alexjan -- Alexjan Carraturo -- Twitter/Facebook/Identica/flickr: axjslack Personal site: http://axjslack.wordpress.com -- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

7 18