Adaptec 2110S SCSI RAID and SuSe 9.0 AMD64
I have been messing around with the install of SuSe AMD64 and can not get this thing to work at all. I had to use the switch "idle=poll" and that got the install program to stop hanging at the hardware detect section. Now the problem that I have come across is that when ever I try to load the drivers for my Adaptec 2110S SCSI RAID controller the system crashes with a really long error message. I was wondering if anyone has found a fix for this. I have tried all sorts of things to get this to work but have had no success as of yet. Please advice on this issue. Thanks. Oh in case it matters my system specs are as follows: AMD Athlon64 3200+ Gigabyte K8NNXP bios revision F12 2 x 512MB Corsair DDR433 memory ATI Radeon 9800 Pro TDK DVD+/-RW drive Lite-On 52x CD-Rom Adaptec 2110S U160 SCSI RAID Controller 4 x 18.6GB IBM U160 SCSI HD (RAID 5) Message sent via MyMail - http://MyMail.CableONE.net
On Wed, 4 Feb 2004 14:19:01 -0700
I have been messing around with the install of SuSe AMD64 and can not get this thing to work at all. I had to use the switch "idle=poll" and that got the install program to stop hanging at the hardware detect section. Now the problem that I have come across is that when ever I try to load the drivers for my Adaptec 2110S SCSI RAID controller the system crashes with a really long error message. I was wondering if anyone has found a fix for this. I have tried all sorts of things to get this to work but have had no success as of yet. Please advice on this issue.
2110S is not supported on 64bit right now sorry. Either ask Adaptec for a 64bit driver or use a different SCSI controller. -Andi
participants (2)
-
Andi Kleen
-
sprousew@cableone.net