Hey there. Im trying to set up Suse 8.2AMD64on a Tyan Tiger K8W motherboard with dual opteron 242s. I have two RAID arrays going on, one off of an HPT37x2 controller, and another off of an SiL 3114 SATA controller. The problem I am having is with the Intel Gigabit Ethernet on-board. During the setup, the card is recognized, and I can give it an IP. After setup, during boot, when it tries to bring the interface up, it fails right away. When I get into Suse, and do an ifconfig, the interface does not appear. Sometimes im able to give it an IP, but I can not ping anything on the network, only itself. I looked for drivers, and found some off of Intels Website. I try installing according to the instructions, but when told to do insmod, it fails with "relocation overflow of type 10". I think this is because it is not a 64bit driver. Anyways, was wondering if anyone has gotten this board or card to work under 8.2. I would like to stick to 8.2, because it is so far, the only 64bit linux that will support both of my RAID cards above. Unless someone has gotten both cards to work under something else like 9.0 or 9.1 Thanks John Barbieri