Mailinglist Archive: opensuse (958 mails)

< Previous Next >
Re: [opensuse] Jelly Comb touchpad not working
04.05.2019 0:23, Marc Chamberlin пишет:
Hi -  I recently purchased a cute combo USB/Bluetooth keyboard/touchpad
from Jelly Comb

I do not see any such product on their site.

and when I plugged it in to my OpenSuSE Leap 15.0 system
x64 with a KDE desktop, I only got partial joy from it. The keyboard
works fine but the touchpad is unhappy and not responding to my
caresses. The KDE desktop system settings utility for touchpads simply
thumbs it's nose at it and says "No touchpad found" I tried installing
the xf86-input-synaptics package but that didn't do squat.

I did a bit of Googling around to see if I could learn what to do to
make it happy but not coming up with much. Here is some info that I have
about it.

dmesg reports the following when the keyboard is plugged in -

[ 1175.023751] usb 3-5.1.5: new low-speed USB device number 8 using
xhci_hcd
[ 1175.151134] usb 3-5.1.5: New USB device found, idVendor=258a,
idProduct=6a88
[ 1175.151138] usb 3-5.1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1175.151141] usb 3-5.1.5: Product: USB KEYBOARD
[ 1175.151143] usb 3-5.1.5: Manufacturer: SINO WEALTH
[ 1175.155208] input: SINO WEALTH USB KEYBOARD as
/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.0/0003:258A:6A88.0007/input/input18
[ 1175.211986] hid-generic 0003:258A:6A88.0007: input,hidraw0: USB HID
v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-5.1.5/input0
[ 1175.222147] input: SINO WEALTH USB KEYBOARD as
/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.1/0003:258A:6A88.0008/input/input19
[ 1175.280026] hid-generic 0003:258A:6A88.0008:
input,hiddev96,hidraw1: USB HID v1.10 Mouse [SINO WEALTH USB KEYBOARD]
on usb-0000:00:14.0-5.1.5/input1
[ 1176.029415] SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=98:90:96:e4:28:bd:00:31:46:49:36:a1:08:00 SRC=185.61.150.201
DST=205.151.255.18 LEN=44 TOS=0x00 PREC=0x00 TTL=70 ID=32417 PROTO=TCP
SPT=60074 DPT=21 WINDOW=32120 RES=0x00 SYN URGP=0 OPT (02040200)

The relevant portion from  doing a cat /proc/bus/input/devices


I: Bus=0003 Vendor=258a Product=6a88 Version=0110
N: Name="SINO WEALTH USB KEYBOARD"
P: Phys=usb-0000:00:14.0-5.1.5/input0
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.0/0003:258A:6A88.0007/input/input18
U: Uniq=
H: Handlers=sysrq kbd leds event12
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=258a Product=6a88 Version=0110
N: Name="SINO WEALTH USB KEYBOARD"
P: Phys=usb-0000:00:14.0-5.1.5/input1
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.5/3-5.1.5:1.1/0003:258A:6A88.0008/input/input19
U: Uniq=
H: Handlers=kbd mouse0 event13
B: PROP=0
B: EV=17
B: KEY=2a000000000 0 1f0000 1000302000000 3838d801d001 1e000000000000 0
B: REL=143
B: MSC=10


It is not a touchpad. Touchpad is supposed to support absolute position
event, while this looks like mouse with two wheels and additional buttons.

I am not even sure whether this refers to your touchpad or some other
mouse emulation on this keyboard.

Does cursor respond to any strokes?


and

xinput -list
? Virtual core pointer                          id=2    [master
pointer  (3)]
?   ? Virtual core XTEST pointer                id=4    [slave 
pointer  (2)]
?   ? Microsoft Microsoft IntelliMouse® Explorer        id=10  
[slave  pointer  (2)]
?   ? SINO WEALTH USB KEYBOARD                  id=9    [slave 
pointer  (2)]
? Virtual core keyboard                         id=3    [master
keyboard (2)]
    ? Virtual core XTEST keyboard               id=5    [slave 
keyboard (3)]
    ? Power Button                              id=6    [slave 
keyboard (3)]
    ? Power Button                              id=7    [slave 
keyboard (3)]
    ? AT Translated Set 2 keyboard              id=11   [slave 
keyboard (3)]
    ? SINO WEALTH USB KEYBOARD                  id=8    [slave 
keyboard (3)]
    ? SINO WEALTH USB KEYBOARD                  id=12   [slave 
keyboard (3)]

the Microsoft Microsot IntelliMouse Explorer is simply for another mouse
I have in order to have a mouse available temporarily while I try and
solve this problem. Anyone got an idea on how to make my new touchpad
work? Thanks...

    Marc...



--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups
References