Mailinglist Archive: opensuse (389 mails)

< Previous Next >
Re: [opensuse] how to determine actual SATA speed ?
  • From: Per Jessen <per@xxxxxxxxxxxx>
  • Date: Fri, 22 Mar 2019 07:14:37 +0100
  • Message-id: <q71ugd$mbf$>
Andrei Borzenkov wrote:

21.03.2019 21:31, Per Jessen пишет:
Andrei Borzenkov wrote:

21.03.2019 14:44, Per Jessen пишет:
# dmesg | grep -i sata
[3.552297] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0
[3.552459] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30b8

This just tells you that controller (probably, ULi) was found. If
there are no "SATA link up" messages, are you sure your disks are
actually connected to this controller?

No, but they are connected to _something_. :-)

Your controller runs in IDE emulation mode, so no SATA specific

Ah, I see. Must be a BIOS setting. Thanks.

Per Jessen, Zürich (1.5°C) - virtual servers, made in Switzerland.

To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups