Mailinglist Archive: opensuse (1108 mails)

< Previous Next >
Re: [opensuse] kernel versions
On 21/08/18 13:20, don fisher wrote:
On 08/20/2018 08:01 PM, Basil Chupin wrote:
On 20/08/18 12:47, don fisher wrote:
One success:-) I was able to boot the Leap 15 installation DVD if I selected F5 and Safe Settings. I now need to find out exactly what this sets so I can try these settings on the other kernels I have had problems with. And maybe isolate what hardware appears inconsistent.

Don


<quote>

F5Kernel

     If you encounter problems with the regular installation, this menu offers to disable a few potentially problematic functions. If your hardware does not support ACPI (advanced configuration and power interface) select No ACPI to install without ACPI support. No local APIC disables support for APIC (Advanced Programmable Interrupt Controllers) which may cause problems with some hardware. Safe Settings boots the system with the DMA mode (for CD/DVD-ROM drives) and power management functions disabled.

     If you are not sure, try the following options first: Installation—ACPI Disabled or Installation—Safe Settings. Experts can also use the command line (Boot Options) to enter or change kernel parameters.

 >/quote>

https://doc.opensuse.org/documentation/leap/startup/html/book.opensuse.startup/cha.boot_parameters.html
Did you read my last post? I tried all of the suggested parameters and isolated the problem to acpi=off.

Yes I did.

I am a bit tired now and am not sure how to proceed from here. In the old days I would have built a kernel and run it under gdb. I assume one can still do that, but have not checked.

Alright, so now you can boot the DVD and start the installation process. Therefore, install Leap 15.0 and don't start fooling around with any "building" kernels stuff -- just first install 15.0 and get it running. Worry about new kernels LATER, OK?

Now, a word of advice: that laptop of yours (you haven't confirmed my post asking if it was Alienware 13 R3 as per that Wikipedia page) would have the ability to use UEFI. What I suggest is that you turn that off in the BIOS and install Leap 15.0 in "legacy" mode.

Also, when you reach the installation part where the choice is made which partition will be used to install Leap and where /home will be created and that the file system BTRFS will be used to format the partition CHOOSE THE EXPERT OPTION and make your own choices about formatting etc. For example, I format the "/" partition in ext4 and do not have a separate "/home" somewhere outside the "/". But that is ME -- do whatever you want, just, please, get Leap 15 installed and running so that we can get with on with worrying about new kernels, OK? :-)

BC

--

There comes a time in the affairs of a man when he has to take
the bull by the tail and face the situation.
W C Fields



--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
This Thread
Follow Ups