Mailinglist Archive: opensuse (1839 mails)

< Previous Next >
[opensuse] fglrxinfo hangs, cannot use OpenGL.
  • From: "defiant @dslextreme.com" <defiant@xxxxxxxxxxxxxx>
  • Date: Sat, 18 Sep 2010 10:15:49 -0700
  • Message-id: <AANLkTikNOfFFDGCfXouYuMSo3F-GvmBsBARTwrZ59aj3@xxxxxxxxxxxxxx>
Good day,

This is the output of LIBGL_DEBUG=verbose fglrxinfo

libGL: XF86DRIGetClientDriverName: 8.77.5 fglrx (screen 0)
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 5, (OK)
ukiOpenByBusid: ukiOpenMinor returns 5
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0


Seems to be hanging on PC:2:0:0

Ouput of:

cat Xorg.0.log | grep PCI
[ 16.954] (--) PCI:*(0:2:0:0) 1002:9588:1462:0990 ATI Technologies
Inc RV630 [Radeon HD 2600XT] rev 0, Mem @ 0xc0000000/268435456,
0xff4f0000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 17.137] (II) Primary Device is: PCI 02@00:00:0
[ 17.143] (WW) fglrx: No matching Device section for instance
(BusID PCI:0@2:0:1) found
[ 17.247] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 17.247] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 17.312] (II) fglrx(0): PCIE card detected
[ 18.987] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 18.987] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 18.987] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 20.239] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 20.239] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0


Output of:

cat Xorg.0.log | grep fglrx
[ 16.998] (II) LoadModule: "fglrx"
[ 16.999] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 17.020] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 17.021] (II) Loading sub module "fglrxdrm"
[ 17.021] (II) LoadModule: "fglrxdrm"
[ 17.021] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 17.021] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 17.137] (WW) Falling back to old probe method for fglrx
[ 17.143] (WW) fglrx: No matching Device section for instance
(BusID PCI:0@2:0:1) found
[ 17.144] (II) fglrx(0): pEnt->device->identifier=0x8021b0
[ 17.148] (II) fglrx(0): === [atiddxPreInit] === begin
[ 17.149] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 17.149] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes
(32 bpp pixmaps)
[ 17.149] (==) fglrx(0): Default visual is TrueColor
[ 17.149] (**) fglrx(0): Option "DPMS" "true"
[ 17.149] (==) fglrx(0): RGB weight 888
[ 17.149] (II) fglrx(0): Using 8 bits per RGB
[ 17.149] (==) fglrx(0): Buffer Tiling is ON
[ 17.149] (II) Loading sub module "fglrxdrm"
[ 17.149] (II) LoadModule: "fglrxdrm"
[ 17.150] (II) Reloading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 17.248] (==) fglrx(0): NoAccel = NO
[ 17.248] (**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
[ 17.248] (--) fglrx(0): Chipset: "ATI Radeon HD 2600 XT" (Chipset = 0x9588)
[ 17.248] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0990)
[ 17.248] (==) fglrx(0): board vendor info: third party graphics
adapter - NOT original ATI
[ 17.248] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 17.248] (--) fglrx(0): MMIO registers at 0xff4f0000
[ 17.248] (--) fglrx(0): I/O port at 0x0000c000
[ 17.248] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 17.254] (II) fglrx(0): AC Adapter is used
[ 17.269] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 17.272] (II) fglrx(0): VESA BIOS detected
[ 17.272] (II) fglrx(0): VESA VBE Version 3.0
[ 17.272] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 17.272] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 17.272] (II) fglrx(0): VESA VBE OEM Software Rev: 10.53
[ 17.272] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 17.272] (II) fglrx(0): VESA VBE OEM Product: RV630
[ 17.272] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 17.312] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 17.312] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 17.312] (II) fglrx(0): PCIE card detected
[ 17.312] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 17.312] (WW) fglrx(0): board is an unknown third party board,
chipset is supported
[ 17.313] (II) fglrx(0): Using adapter: 2:0.0.
[ 17.345] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000,
MCFBSize = 0x20000000)
[ 17.510] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[ 17.510] (II) fglrx(0): RandR 1.2 support is enabled!
[ 17.510] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 17.510] (==) fglrx(0): Center Mode is disabled
[ 17.511] (==) fglrx(0): Active stereo disabled
[ 18.587] (II) fglrx(0): Finished Initialize PPLIB!
[ 18.590] (II) fglrx(0): Output DFP1 using monitor section
aticonfig-Monitor[0]-0
[ 18.590] (II) fglrx(0): Output DFP2 has no monitor section
[ 18.590] (II) fglrx(0): Output CRT1 has no monitor section
[ 18.590] (II) fglrx(0): Output CRT2 has no monitor section
[ 18.590] (II) fglrx(0): Output TV has no monitor section
[ 18.590] (II) fglrx(0): Output CV has no monitor section
[ 18.590] (II) fglrx(0): Connected Display0: CRT1
[ 18.590] (II) fglrx(0): Display0: Failed to get EDID information.
[ 18.986] (II) fglrx(0): Cannot get EDID information for CRT1
[ 18.986] (II) fglrx(0): Output DFP1 disconnected
[ 18.986] (II) fglrx(0): Output DFP2 disconnected
[ 18.986] (II) fglrx(0): Output CRT1 connected
[ 18.986] (II) fglrx(0): Output CRT2 disconnected
[ 18.986] (II) fglrx(0): Output TV disconnected
[ 18.986] (II) fglrx(0): Output CV disconnected
[ 18.986] (II) fglrx(0): Using exact sizes for initial modes
[ 18.986] (II) fglrx(0): Output CRT1 using initial mode 1600x1200
[ 18.986] (II) fglrx(0): DPI set to (96, 96)
[ 18.986] (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.986] (II) fglrx(0): Adapter ATI Radeon HD 2600 XT has 2
configurable heads and 1 displays connected.
[ 18.986] (==) fglrx(0): PseudoColor visuals disabled
[ 18.986] (==) fglrx(0): NoDRI = NO
[ 18.986] (==) fglrx(0): Capabilities: 0x00000000
[ 18.986] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 18.986] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 18.986] (==) fglrx(0): UseFastTLS=0
[ 18.986] (==) fglrx(0): BlockSignalsOnLock=1
[ 18.987] (II) fglrx(0): doing swlDriScreenInit
[ 18.987] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 18.987] (II) fglrx(0): [uki] DRM interface version 1.0
[ 18.987] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 18.987] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 18.987] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9879e38000
[ 18.987] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 18.987] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 18.987] (II) fglrx(0): swlDriScreenInit done
[ 18.987] (II) fglrx(0): Kernel Module Version Information:
[ 18.987] (II) fglrx(0): Name: fglrx
[ 18.987] (II) fglrx(0): Version: 8.77.5
[ 18.987] (II) fglrx(0): Date: Aug 25 2010
[ 18.987] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 18.987] (II) fglrx(0): Kernel Module version matches driver.
[ 18.987] (II) fglrx(0): Kernel Module Build Time Information:
[ 18.987] (II) fglrx(0): Build-Kernel UTS_RELEASE:
2.6.34.7-0.2-desktop
[ 18.987] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 18.987] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 18.987] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 18.987] (II) fglrx(0): [uki] register handle = 0x00004000
[ 19.019] (II) fglrx(0): Display width adjusted to to 1664 due to
alignment constraints
[ 19.019] (II) fglrx(0): DRI initialization successfull
[ 19.019] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a8000
[ 19.019] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[ 19.019] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664)
(front color buffer - assumption)
[ 19.019] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[ 19.020] (==) fglrx(0): Backing store disabled
[ 19.020] (**) fglrx(0): DPMS enabled
[ 19.020] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 19.020] (**) fglrx(0): Textured Video is enabled.
[ 19.023] (II) fglrx(0): GLESX enableFlags = 94
[ 19.023] (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
[ 19.023] (II) fglrx(0): GLESX is enabled
[ 19.030] (II) fglrx(0): UVD2 feature is available
[ 19.033] (II) fglrx(0): Enable composite support successfully
[ 19.033] (WW) fglrx(0): Option "AccelMethod" is not used
[ 19.033] (WW) fglrx(0): Option "VendorName" is not used
[ 19.033] (WW) fglrx(0): Option "ModelName" is not used
[ 19.033] (II) fglrx(0): X context handle = 0x1
[ 19.033] (II) fglrx(0): [DRI] installation complete
[ 19.033] (==) fglrx(0): Silken mouse enabled
[ 19.033] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 19.033] (II) fglrx(0): Disabling in-server RandR and enabling
in-driver RandR 1.2.
[ 19.033] (II) fglrx(0): Cannot get TV Format. Set all TV geometry
value to zero!
[ 19.033] (II) fglrx(0): Cannot get TV Format for trying to adjust
horizontal position after horizontal size changed.
[ 20.296] (II) AIGLX: Loaded and initialized
/usr/X11R6/lib64/modules/dri/fglrx_dri.so
[ 20.296] (II) fglrx(0): Enable the clock gating!
[ 20.296] (II) fglrx(0): Setting screen physical size to 423 x 317
[ 20.392] (II) fglrx(0): Restoring Recent Mode via PCS is not
supported in RANDR 1.2 capable environments
[ 20.474] (II) fglrx(0): Cannot get EDID information for CRT1
[ 48.108] (II) fglrx(0): Cannot get EDID information for CRT1
[ 48.773] (II) fglrx(0): Cannot get EDID information for CRT1
[ 56.075] (II) fglrx(0): Cannot get EDID information for CRT1


Any help appreciated.

Many thanks,

Matt
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups