Mailinglist Archive: opensuse (2459 mails)

< Previous Next >
Re: [opensuse] [OT] unstable system - still trying to identify the culprit.
  • From: kanenas@xxxxxxxxxxxxx
  • Date: Sun, 2 Mar 2008 12:45:28 -1000
  • Message-id: <200803021245.28348.kanenas@xxxxxxxxxxxxx>
On Sunday 02 March 2008 09:58:00 am Per Jessen wrote:
Per Jessen wrote:
Now you can run kernel compilation from script, that will compile,
than 'make mrproper' and than again compile for hours to see how it
works in long run, ie. how it handles real thermal stress, but at
least you know that mprime was at least part of the problem, if not
the only problem. I agree with you that thermal problem should be put
on rest for now.

I'll set up the machine to run kernel compiles all night, it's already
running in fact.

Well. That didn't take long. About 35minutes. Crash.

I was running the following:

cd /usr/src/linux
while true
do
make mrproper
zcat /proc/config.gz >.config
make -j6
done

plus a little homegrown memory-exerciser that really just exercises
memory in a straight forward way.


/Per Jessen, Z├╝rich

so far you have changed power supply, mobo and perhaps the cpu fan.
most probably the replacement components are not at fault. the major
components that have still not been physically replaced are:
cpu, ram, disk, disk cables, os. You need to try an alternate on each item.
If you have a spare hard drive, wipe it out, get a new cable and install
windoze without any RAID software. If you meet with success, try 10.3 without
the RAID, then with the RAID. If you still have crashes with new disk, cables
and os, try a new memory stick. If that fails as well, you will have enough
documentation to argue for a free cpu replacement.
If you still have a problem, call an exorcist.
and please keep us posted.
good luck,
d.

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >