Mailinglist Archive: opensuse (3106 mails)

< Previous Next >
Re: [opensuse] Would like explanation from networking guru
  • From: Art Fore <art.fore@xxxxxxxxxxx>
  • Date: Fri, 16 Feb 2007 15:56:19 +0800
  • Message-id: <1171612579.23425.17.camel@xxxxxxxxxxxxxxxxxxx>
On Fri, 2007-02-16 at 14:38 +0700, Fajar Priyanto wrote:
> On Friday 16 February 2007 14:20, Art Fore wrote:
> > > > default 192.168.11.1 0.0.0.0 UG 0 0 0
> > > > eth1
> > > >
> > > > eth0 is winxp, eth1 is linux
> > >
> > > And 192.168.11.1 is the gateway between Linux network and Windows
> > > network? There you go.
> >
> > How do you get that 192.168.11.1 is gateway to the Windows network? I
> > had to delete the default 10.18.32.1 gateway for eth0 so I could get to
> > the internet via eth1 wireless from linux. Windows goes to eth0 via
> > vnic0 bridged network. If it were going to eth1, I would not be able to
> > logon to the corporate network, and by the same token, If I remove the
> > default eth1 192.168.11.1 route, I cannot get to the internet, but
> > windows still can via eth0, However, can still get to the samba server
> > on the 10.18.32.0 netowrk. Please explain.
>
> UG = default gateway
> Actually as long as you have PC that acts as gateway in your network, you can
> arrange the routing to anywhere in your company network using those gateways
>
> The command is:
> ip route add 192.168.11.0/24 via 192.168.11.1
> ip route add blabla/bla via blabla
> so on...
>
OK, if I delete the default 192.168.11.1 UG route and no longer have a
default gateway, I can still get to the samba server on the windows
network (eth0), but not the internet on the wireless (eth1) from linux..
Cannot get to the internet from linux on the windows network in any case
though as I am not logged on from Linux, and internet access from the
windows (eth0) is only available via a webproxy (which is in the Texas &
I am Taiwan) available only if you are logged on to the windows domain.
The only machine I do get access to is the local samba server from
Linux, that part which I understand, just not how I get to it when Linux
is on eth1 and it is on eth0 network.

Art

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups