Mailinglist Archive: opensuse (3831 mails)

< Previous Next >
[opensuse] Re: openSuSE 10.2 crashing too often
  • From: Eberhard Roloff <tuxebi@xxxxxx>
  • Date: Tue, 09 Jan 2007 10:56:49 +0100
  • Message-id: <envot4$j3n$1@xxxxxxxxxxxxx>
Martin Mielke wrote:

> I have superkaramba installed and already use some plugins (the almost
> omnipresent LiquidWeather and some others). None of the plugins for
> monitoring will display the info I need (CPU temp, HDD rpm's, etc) even
> after executing sensors-detect as root and getting some "Succeed!"
> messages for some sensors...
>
> Any ideas on this?

Maybe your motherboard/bios does not deliver the relevant data?
I frequently experience this with cheapo boards where the manafacturers
restricted the bios in this respect.
Did you follow exactly the advice that sensors-detect gave you?
This is especially important in regard to execute the given "modprobe xxx"
commands before running "sensors", otherwise it will not work.

What is the output, if you run "sensors" from the commandline?
ex. on my system this reads like this:

###start of sensors output###
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.60 V (min = +0.00 V, max = +3.84 V)
+12V: +12.28 V (min = +7.78 V, max = +0.00 V) ALARM
+3.3V: +3.36 V (min = +0.42 V, max = +0.74 V) ALARM
+5V: +5.04 V (min = +3.65 V, max = +4.56 V) ALARM
-12V: +6.06 V (min = +0.14 V, max = -12.20 V) ALARM
V5SB: +5.08 V (min = +0.97 V, max = +1.02 V) ALARM
VBat: +0.16 V (min = +2.56 V, max = +1.17 V) ALARM
fan1: 0 RPM (min = -1 RPM, div = 128) ALARM
CPU Fan: 2872 RPM (min = -1 RPM, div = 2) ALARM
fan3: 0 RPM (min = 292 RPM, div = 128) ALARM
M/B Temp: +32°C (high = +65°C, hyst = +0°C) sensor = thermistor
CPU Temp: +25.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor
vid: +1.525 V (VRM Version 9.0)
alarms:
beep_enable:
### end of sensors output ###

only after you get some relevant output from "sensors" on the commandline I
would recommend you to look into graphical frontends to read the data in a
more friendly way.

regards
Eberhard


--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
References