Mailinglist Archive: opensuse (4634 mails)

< Previous Next >
[opensuse] 10.2 netraid problem
  • From: Coach-X <coachx@xxxxxxx>
  • Date: Fri, 15 Dec 2006 16:41:30 -0500
  • Message-id: <4583168A.20900@xxxxxxx>
Upgraded a working SuSE 9.3 system to 10.2 System is HP with integrated
Netraid, running raid level 5. All went well, but during boot I see a
lot of these errors:

<6> sdc:<6>attempt to access beyond end of device
<6>attempt to access beyond end of device
<6>sdb: rw=0, want=71119511, limit=35566480
<3>Buffer I/O error on device sdb2, logical block 851200

After 10 minutes or so the system will boot and seems to run normally.

Yast partitioner sees the raid as sda, but also sdb, sdc and sdd.
Cant do anything with them as the error says sdb/c/d are not readable by
parted. Nothing in fstab except sda. This same setup ran under 9.3
without this issue. Any help trying to locate the root of this problem
would be appreciated.
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
This Thread
  • No further messages