Mailinglist Archive: opensuse (2831 mails)

< Previous Next >
  • From: steve <mail@xxxxxxxxxxxx>
  • Date: Mon, 3 Jul 2006 01:26:08 +0200
  • Message-id: <200607030126.08185.mail@xxxxxxxxxxxx>
On Monday 03 July 2006 01:07, Gerold van Dijk wrote:
> I used YaST2 to configure 2 network interfaces under SuSE 10.0, to be
> functioning as an Internet Gateway for my LAN.
> I enabled IP Forwarding, checked the IP addresses and the Firewall
> settings, but it will NOT do the NAT job!
> Please Help!!??
> Regards,
> gerold@xxxxxxxxxxxx

Had the same problem. Not much info there but if you are using a router
connected to the Internet like a broadband connection, then you must NAT the
router address to your lan router box first. Like our router is
192,168.0.254. We NAT that (choose your flavour of ports) to and
then to our lan at etc. etc.

Check the headers for your unsubscription address
For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
Also check the archives at
Please read the FAQs: suse-linux-e-faq@xxxxxxxx

< Previous Next >