Mailinglist Archive: opensuse (2912 mails)

< Previous Next >
dvd::rip and vcd's
  • From: Colin Murphy <Colin@xxxxxxxxxxxxxxx>
  • Date: Sat, 5 Feb 2005 10:42:21 +0000
  • Message-id: <200502051042.21392.Colin@xxxxxxxxxxxxxxx>
While I am able to write avi type files as .iso images I have been unable to
create any vcd type discs with dvd::rip on my Suse 9.2 box. This is the
output box.

Job 'Burn CD ' failed.

Executed command: rm
-f /home/NewUser/Ripping/unnamed/avi/003/unnamed_1.vcd.bin; ln
-s /home/NewUser/Ripping/unnamed/avi/003/unnamed_1.vcd /home/NewUser/Ripping/unnamed/avi/003/unnamed_1.vcd.bin
&& dr_exec cdrdao write --device ATA:0,1,0 --device 0,1,0 --speed 4 --driver
generic-mmc --eject
--overburn /home/NewUser/Ripping/unnamed/avi/003/unnamed_1.vcd.cue &&
rm /home/NewUser/Ripping/unnamed/avi/003/unnamed_1.vcd.bin && echo
DVDRIP_SUCCESS

[...]

ERROR: Cannot open SCSI device '0,1,0': Cannot open '/dev/pg1'

Now, I have done a some research, as much as I can understand, and I realise
that this has something to do with my configuration of the writing device. I
am confused by the new way of addressing such devices in the 2.6 kernel that
I now have, the ATA: and ATAPI: devices.

cdrdao first:-

NewUser@linux:~> cdrdao scanbus --device ata:
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@xxxxxxxx>
[...]
Using libscg version 'schily-0.8'

ATA:1,1,0 _NEC , DVD_RW ND-2500A , 1.06

and

NewUser@linux:~> cdrdao scanbus --device atapi:
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@xxxxxxxx>
[...]
Using libscg version 'schily-0.8'

ATA:1,1,0 _NEC , DVD_RW ND-2500A , 1.06

regardless of what device type I call I get the ATA: device back, but with
cdrecord:-

NewUser@linux:~> cdrecord dev=ATAPI: -scanbus
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this
version.
scsidev: 'ATAPI:'
devname: 'ATAPI'
scsibus: -1 target: -1 lun: -1
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) *
0,1,0 1) '_NEC ' 'DVD_RW ND-2500A ' '1.06' Removable CD-ROM
0,2,0 2) *
[...]
0,7,0 7) *

and

NewUser@linux:~> cdrecord dev=ATA: -scanbus
[...]
scsidev: 'ATA:'
devname: 'ATA'
scsibus: -1 target: -1 lun: -1
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(okir@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx '@(#)scsi-linux-sg.c 1.83
04/05/20 Copyright 1997 J. Schilling').
scsibus1:
1,0,0 100) *
1,1,0 101) '_NEC ' 'DVD_RW ND-2500A ' '1.06' Removable CD-ROM
1,2,0 102) *
[...]
1,7,0 107) *

I get different results, ATAPI:0,1,0 and ATA:1,1,0 . So which is the correct
one to configure in dvd::rip and how to configure them?

Currently I have :-

'cdrecord command' > cdrecord dev=ATAPI:0,1,0
'cdrdao command' > cdrdao write --device ATA:0,1,0

though I have tried other combinations with no success.

So, what is the secret?




--
Colin Murphy, a man for all seasons, especially pepper.

< Previous Next >
This Thread
  • No further messages