Mailinglist Archive: opensuse (2912 mails)

< Previous Next >
Re: [SLE] Connexant Modem Driver for SuSe Linux
  • From: Dave Barton <bmcs@xxxxxxxxxxxxx>
  • Date: Tue, 22 Feb 2005 06:49:06 +1100
  • Message-id: <1109015345.5935.17.camel@xxxxxxxxxxx>
On Tue, 2005-02-22 at 04:02, Per Jessen wrote:
> Dave Barton wrote:
>
> > Yes, it's a shame he did that, because I have the same issue on SuSE 9.0
> > and was hoping someone might have been able to offer a solution.
> >
> > My D-Link usb modem shows up as:
> >
> > HWClass=modem
> > Model=Conexant Systems (Rockwell) Modem
> > Configured=yes
> > Available=yes
> > Needed=no
> > Active=unknown
> > Bus=0x86
> > Slot=0x103
> > BaseClass=0x102
> > VendorID=u0572
> > DeviceID=1300
> > VendorName=Conexant Systems (Rockwell), Inc.
> > RevisionName=1.00
> > UnixDevice=/dev/ttyACM0
>
> What happens if you use slip or ppp on /dev/ttyACM0 ? It looks like you
> have the right modules loaded - acm in particular.
>
> > Unfortunately, non of the standard dial-up tools can access this modem.
>
> what sort of errors are you seeing?
>
>
> /Per Jessen, Z├╝rich

When I try to use slip or ppp on /dev/ttyACMO I get the message that the
modem can't be accessed.

Dave



< Previous Next >