Mailinglist Archive: opensuse (4547 mails)

< Previous Next >
suse 9.1 kernel-module-pcmcia-wireless card problem
  • From: shane@xxxxxxxx
  • Date: Sat, 29 May 2004 14:16:22 -0600
  • Message-id: <1085861782.40b8ef964d994@xxxxxxxxxxxxx>

Any help please!!!!!!!!!
SuSE 9.1 boots normally for the most part. I insert (or boot with) my d-link
or Orinoco wireless card and get this.


May 29 10:12:50 linux cardmgr[1611]: socket 0: Anonymous Memory
May 29 10:12:50 linux cardmgr[1611]: executing: 'modprobe memory_cs 2>&1'
May 29 10:12:50 linux cardmgr[1611]: + FATAL: Module memory_cs not found.
May 29 10:12:50 linux cardmgr[1611]: modprobe exited with status 1
May 29 10:12:50 linux cardmgr[1611]:
module /lib/modules/2.6.4-54.5-default/pcmcia/memory_cs.o not available
May 29 10:12:50 linux cardmgr[1611]: bind 'memory_cs' to socket 0 failed:
Invalid argument
May 29 10:13:41 linux cardmgr[1611]: exiting

No Network, so I excute as root:

linux:~ # rcpcmcia restart
Shutting down PCMCIA FATAL: Module ds is in use.
FATAL: Module pcmcia_core is in use.
failed
Starting PCMCIA done
linux:~ #

Then I have network, and syslog says this:


May 29 10:13:42 linux kernel: PCI: Found IRQ 10 for device 0000:00:0a.0
May 29 10:13:42 linux kernel: PCI: Sharing IRQ 10 with 0000:00:0d.0
May 29 10:13:42 linux kernel: Yenta: CardBus bridge found at 0000:00:0a.0
[1558:8501]
May 29 10:13:42 linux kernel: Yenta: Using INTVAL to route CSC interrupts to
PCI
May 29 10:13:42 linux kernel: Yenta: Routing CardBus interrupts to PCI
May 29 10:13:42 linux kernel: Yenta: ISA IRQ mask 0x08d8, PCI irq 10
May 29 10:13:42 linux kernel: Socket status: 30000010
May 29 10:13:42 linux kernel: PCI: Found IRQ 10 for device 0000:00:0a.1
May 29 10:13:42 linux kernel: Yenta: CardBus bridge found at 0000:00:0a.1
[1558:8501]
May 29 10:13:42 linux kernel: Yenta: Using INTVAL to route CSC interrupts to
PCI
May 29 10:13:42 linux kernel: Yenta: Routing CardBus interrupts to PCI
May 29 10:13:42 linux kernel: Yenta: ISA IRQ mask 0x08d8, PCI irq 10
May 29 10:13:42 linux kernel: Socket status: 30000006
May 29 10:13:43 linux cardmgr[3493]: watching 2 sockets
May 29 10:13:43 linux kernel: cs: IO port probe 0x0c00-0x0cff: clean.
May 29 10:13:43 linux kernel: cs: IO port probe 0x0820-0x08ff: clean.
May 29 10:13:43 linux kernel: cs: IO port probe 0x0800-0x080f: clean.
May 29 10:13:43 linux kernel: cs: IO port probe 0x03e0-0x04ff: excluding
0x4d0-0x4d7
May 29 10:13:43 linux kernel: cs: IO port probe 0x0100-0x03af: clean.
May 29 10:13:43 linux kernel: cs: IO port probe 0x0a00-0x0aff: clean.
May 29 10:13:43 linux cardmgr[3494]: socket 0: D-Link DWL-650
May 29 10:13:43 linux kernel: eth0: Station identity 001f:0009:0001:0004
May 29 10:13:43 linux kernel: eth0: Looks like an Intersil firmware version
1.4.9
May 29 10:13:43 linux kernel: eth0: Ad-hoc demo mode supported
May 29 10:13:43 linux kernel: eth0: IEEE standard IBSS ad-hoc mode supported
May 29 10:13:43 linux kernel: eth0: WEP supported, 104-bit key
May 29 10:13:43 linux kernel: eth0: MAC address 00:40:36:A7:17:4C
May 29 10:13:43 linux kernel: eth0: Station name "Prism I"
May 29 10:13:43 linux kernel: eth0: ready
May 29 10:13:43 linux kernel: eth0: index 0x01: Vcc 3.3, irq 3, io
0x0100-0x013f
May 29 10:13:45 linux kernel: eth0: Error -110 setting multicast list.
May 29 10:13:45 linux last message repeated 2 times
May 29 10:13:45 linux kernel: eth0: New link status: Connected (0001)
May 29 10:13:55 linux kernel: eth0: no IPv6 routers present



< Previous Next >
This Thread
  • No further messages