Mailinglist Archive: opensuse (4547 mails)

< Previous Next >
Re: [SLE] SuSE 9.1 multiple IP woes (desperate!)
  • From: Jeff Fulmer <jeff@xxxxxxxxxx>
  • Date: Mon, 24 May 2004 08:07:59 -0400
  • Message-id: <20040524120759.GA18517@xxxxxxxxxxxxx>
On Sun, May 23, 2004 at 10:06:29PM +0200, Hartmut Meyer wrote:
> Hi,
>
> On Saturday 22 May 2004 17:30, Vince Littler wrote:
>
> > 1] If sysconfig can actually support mutiple IP in all the ways which
> > posters on the topic are trying to use it, so that if they did something
> > before without a script, they still can, and if they did something before
> > with a script, the script either still works or can be easily changed, then
> > SUSE need to put out some comprehensive documentation QUICKLY.
> >
> > 2] If 1] does not apply, then SUSE should QUICKLY put up a YOU patch to
> > revert sysconfig to 9.0.
>
> From /var/lib/YaST2/you/mnt/i386/update/9.1/patches/yast2-network-51427
>
> --- snip -----
> Longdescription.english:
> Fixes saving changes in ISDN internet service providers,
> for example toggling Dial on Demand. Also allows entering 4
> WEP keys and re-adds support for multiple IP addresses per
> interface.
> --- snap -----
>
> ==> run YOU.

I applied yast2-network-2.9.43-0.2.i586.rpm and it had no effect. On the
boot none of the additional interfaces comes up. But if I run
network restart *after* I log back in from the reboot, then all the
additional IP addresses come up.

However now that I've applied the patch, I get this message in the
boot.msg log:

Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: 3Com Corporation 3c905 100BaseTX [Boomerang]
eth0 configuration: eth-id-00:60:08:9a:8f:70
eth0 IP address: 69.55.227.107/24
IP address: 69.55.227.108/24
IP address: 69.55.227.109/24
IP address: 69.55.227.110/24
IP address: 69.55.227.111/24
IP address: 69.55.227.112/24
IP address: 69.55.227.113/24
IP address: 69.55.227.114/24
IP address: 69.55.227.115/24
done eth1 device: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet
Controller (rev 81)
eth1 configuration: eth-id-00:0c:f1:fa:71:d7
eth1 IP address: 69.55.227.101/24
IP address: 69.55.227.102/24
IP address: 69.55.227.103/24
IP address: 69.55.227.104/24
IP address: 69.55.227.105/24
IP address: 69.55.227.106/24
doneSetting up service network . . . . . . . . . . . . . .
. .done

Based on that message, you would *think* the additional IP addresses
came up on the boot. They did not. I had to run "network restart" in
order to bring them up. I've now lost two weeks on this problem.

Jeff

--
#include <stdio.h>
int main(){int a[]={74,117,115,116,32,97,110,111,116,104,101,114,32, \
67,32,104,97,99,107,101,114,10,0}; int *b=a;while(*b>0)putchar(*b++);}

< Previous Next >