Mailinglist Archive: opensuse (4547 mails)

< Previous Next >
Re: [SLE] Help needed for Intel PRO/Wireless 2100
  • From: jim barnes <j10152@xxxxxxxxx>
  • Date: Fri, 21 May 2004 22:15:25 -0600
  • Message-id: <40AED3DD.9060405@xxxxxxxxx>
Trey Sizemore wrote:
On Fri, 2004-05-21 at 22:41, jim barnes wrote:



80940_80940.zip worked for me with a stock install. Don't know about later driver releases. Maybe your driver didn't update as you thought it had.

Lots of info here on the subject: (if you haven't already)

ipw2100.sourceforge.net/


Thanks, I now have the interface up (eth1) and have it set for static
IP. It sees the access point according to KWiFiManager and I have a
good signal strength. However, I don't have a valid connection to the
internet...I can't ping and mozilla can't find sites.

Could this be that since I have been accessing the net via eth0 I need
to now say use eth1?


I believe it will default to eth1

Back to yast and make sure default route points to your access point's IP.

-or- edit /etc/sysconfig/network/route to contain "default 192.168.0.1" without the quotes. And then >rcnetwork restart as root.

>route will show the details.



< Previous Next >