Mailinglist Archive: opensuse (4547 mails)

< Previous Next >
Re: [SLE] more Digital Camera issues with SUSE 9.0 upgrades
  • From: Stanley Long <slong@xxxxxxxxxxxxx>
  • Date: Fri, 21 May 2004 09:58:45 -0800
  • Message-id: <1085162325.3556.25.camel@xxxxxxxx>
On Fri, 2004-05-21 at 03:28, Patrick Shanahan wrote:
> * Stanley Long <xx@xxxxx> [05-21-04 00:54]:
> > SuSE 9.0 with apt-get upgrades was recognizing the usb digital camera at
> > /dev/sda1 until the upgrade last weekend.
> >
> > Now the usb system does not beep after camera is turned on.
> >
> > YAST sees and identifies the camera, but I can't mount it:
> > mount -t vfat /dev/sda1 /mnt/camera
> > mount: /dev/sda1 is not a valid block device
> >
> > /var/log/messages shows:
> > kernel: hub.c: new USB device 00:11.2-2, assigned address 12
> > kernel: usb.c: USB device 12 (vend/prod 0x4cb/0x112) is not
> > claimed by any active driver.
> > modprobe: modprobe: Can't open dependencies file
> > /lib/modules/2.4.21-202-athlon/modules.dep
> > (No such file or directory)
> >
> > There is not a 2.4.21-202 directory, but now there is a -215 directory.
> > ls -l /lib/modules/2.4.21-_________
> > -215-athlon
> > -override-athlon
> >
> > I just now did another apt-get upgrade to see if anything changed. There
> > was only one upgrade: SuSE/9.0-i386/update cvs 1.11.6-81 [518kB]
> >
> > Where do I go from here?
>
> You need to restart your system since you have installed a new kernel,
> 215 vs 202.
>
Yep, you and Guillermo are right.
Everything else worked, until I wanted to examine some pictures.

Thanks much for getting me straightened out.
Maybe I should shut this CAD box down more often :-)

> Then, if your camera is still not recognized, with the camera on and
> attached to system, as root issue: /sbin/rchotplug restart
> and wait, it takes a couple of minutes.
> --
> Patrick Shanahan Registered Linux User #207535
> http://wahoo.no-ip.org @ http://counter.li.org
> HOG # US1244711


< Previous Next >
Follow Ups