November 2001 - openSUSE Users - openSUSE Mailing Lists

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

[SLE] LILO - files
by sander.van.vugt＠azlan.nl 06 Sep '04

06 Sep '04

Hi, I'dd like to know what the following files in the directory /boot are about. Can anyone give me a clue or point me to some documentation? - boot.b - chain.b - map - System.map-2.2.14 - chos.* Thanks in advance, Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is adressed. Any views or opinions presented are solely those of the author and do do not necessarily represent those of the Azlan Holdings bv and/or subsidairy. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************* -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

4 3

Triple Booting and Time Travel..
by lee 31 Aug '03

31 Aug '03

Before I do research on how to do this, it is possible to do this right, > on a 2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting > the other? I'm already dual booting fwiw.. > > Thank you for your time. Speaking of time, please check yours. Your email showed up with a date of March 2, 1999... Thanks, Stan Yes, I'm a time traveler you see, I'm only in this time segment now to check on a few stock investments I had in mind...thanx for the tip Stan.. Lee :-)

3 2

LILO & triple booting
by lee 23 Aug '03

23 Aug '03

Before I do research on how to do this, it is possible to do this right, on a 2 drive box, with SUSE 8.0 on 1 drive, Debian and 98se splitting the other? I'm already dual booting fwiw.. Thank you for your time.

5 4

Dell 2650/Perc3 Raid Controller easy switch??
by shado＠mc.net 25 Apr '03

25 Apr '03

I am currently using a Dell 2650 Poweredge server without a raid controller. It's using the standard adaptec onboard SCSI as it stands. I'm wondering if anyone has installed the Perc3 raid controller and had the Linux install just pop right up (assuming the megaraid module was loading)? I wouldn't need to reformat if all I was doing was switching controllers and hardware mirroring, right? Thanks, Rich shado(a)mc.net

2 1

APC Back-UPS CS 350VA USB and SuSE 7.3
by Christopher D. Reimer 24 Feb '03

24 Feb '03

Greetings! I'm thinking about getting an APC Back-UPS CS 350VA USB to automatically shutdown my small file/DSL/firewall server (AOpen micro-ATX motherboard, Cyrix M2-333Mhz, 128MB, 10GB IDE hard drive, SCSI cdrom drive, and no monitor). Does anyone have any experience with this particular UPS? Does the stock SuSE 7.3 kernel support a USB UPS or do I have to hack and patch the kernel to make it work? Recommend a similar model with serial support for under $100 USD? Thanks! Christopher Reimer

4 3

Emergency need lilo su command I've been hacked
by Rowan Reid 26 Nov '02

26 Nov '02

Sorry for the cross post All of a sudden my root password doesn't work. Looks like I've been hacked (though the last time I ran YOU was three weeks ago) it's a Firewall/Web system with ports 80,22,postgres open. Anyways I need to know the command to boot lilo to super user mode. Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

4 6

Kernel panic has me panicked, help
by Rowan Reid 28 Oct '02

28 Oct '02

Last two days I have had the following kernel panic twice. Prior to this I have never had a problem. The first time I had the problem I was running YOU and while retrieving the update list the server crashed. I have also included log snippets pertaining to the problem. Kernel Panic: Aiee killing interrupt handler In interrupt handler not syncing. <messege log snippet> WINDOW=5902 RES=0x00 ACK URGP=0 Oct 24 02:12:20 s3a-www kernel: IN=eth1 OUT= MAC=00:04:75:b1:3d:6c:00:60:49:01:5a:de:08:00 SRC=209.73.225.94 DST=**.**.76.66 LEN=40 TOS=0x00 PREC=0x00 TTL=120 ID=8915 DF PROTO=TCP SPT=80 DPT=54049 W INDOW=0 RES=0x00 ACK RST URGP=0 Oct 24 02:18:45 s3a-www kernel: IN=eth1 OUT= MAC=00:04:75:b1:3d:6c:00:60:49:01:5a:de:08:00 SRC=65.192.24.190 DST=**.**.76.66 LEN=78 TOS=0x00 PREC=0x00 TTL=104 ID=65496 PROTO=UDP SPT=18200 DPT=137 LE N=58 Oct 24 02:34:38 s3a-www syslogd 1.4.1: restart. Oct 24 02:34:39 s3a-www /etc/hotplug/usb.rc[446]: modprobe: Can't locate module evdev Oct 24 02:34:39 s3a-www /etc/hotplug/usb.rc[446]: modprobe: Can't locate module joydev Oct 24 02:34:43 s3a-www kernel: klogd 1.4.1, log source = /proc/kmsg started. Oct 24 02:34:43 s3a-www kernel: Inspecting /boot/System.map-2.4.18 Oct 24 02:34:44 s3a-www kernel: Loaded 11742 symbols from /boot/System.map-2.4.18. Oct 24 02:34:44 s3a-www kernel: Symbols match kernel version 2.4.18. Oct 24 02:34:44 s3a-www kernel: Loaded 10 symbols from 2 modules. Oct 24 02:34:44 s3a-www kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 24 02:34:44 s3a-www kernel: 00:08.0: 3Com PCI 3c905C Tornado at 0x6100. Vers LK1.1.16 Oct 24 02:34:44 s3a-www kernel: 00:09.0: 3Com PCI 3c905C Tornado at 0x6200. Vers LK1.1.16 Oct 24 02:34:44 s3a-www sshd[532]: Server listening on 192.168.1.1 port 22. Oct 24 02:34:44 s3a-www sshd[532]: Server listening on 65.45.76.66 port 22. Oct 24 02:34:50 s3a-www /usr/sbin/cron[713]: (CRON) STARTUP (fork ok) Oct 24 02:34:51 s3a-www smpppd[745]: smpppd version 0.73 started Oct 24 02:35:32 s3a-www kernel: ip_tables: (C) 2000-2002 Netfilter core team Oct 24 02:35:33 s3a-www kernel: ip_conntrack (512 buckets, 4096 max) </message log snippet> </boot.msg log snippet> Inspecting /boot/System.map-2.4.18 Loaded 11742 symbols from /boot/System.map-2.4.18. Symbols match kernel version 2.4.18. Loaded 5 symbols from 1 module. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.18 (root@lnx-s3a-np) (gcc version 2.95.3 20010315 (SuSE)) #11 SMP Wed Aug 14 01:52:38 PDT 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000004000000 (usable) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>On node 0 totalpages: 16384 <4>zone(0): 4096 pages. <4>zone(1): 12288 pages. <4>zone(2): 0 pages. <4>No local APIC present or hardware disabled <4>Kernel command line: auto BOOT_IMAGE=lnz-2.4.18 ro root=302 <6>Initializing CPU#0 <4>Detected 200.458 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 399.76 BogoMIPS <4>Memory: 61172k/65536k available (1311k kernel code, 3980k reserved, 405k data, 256k init, 0k highmem) <4>Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) <4>Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) <4>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 16384 (order: 4, 65536 bytes) <7>CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0 <5>Intel Pentium with F0 0F bug - workaround enabled. <7>CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000 <7>CPU: After generic, caps: 008001bf 00000000 00000000 00000000 <7>CPU: Common caps: 008001bf 00000000 00000000 00000000 <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <7>CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0 <7>CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000 <7>CPU: After generic, caps: 008001bf 00000000 00000000 00000000 <7>CPU: Common caps: 008001bf 00000000 00000000 00000000 <4>CPU0: Intel Pentium MMX stepping 03 <4>per-CPU timeslice cutoff: 159.74 usecs. <5>SMP motherboard not detected. <5>Local APIC not detected. Using dummy APIC emulation. <4>Waiting on wait_init_idle (map = 0x0) <4>All processors have done init_idle <4>PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=0 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <6>Limiting direct PCI/PCI transfers. <6>Activating ISA DMA hang workarounds. <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled <4>block: 128 slots per queue, batch=32 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX3: IDE controller on PCI bus 00 dev 39 <4>PIIX3: chipset revision 0 <4>PIIX3: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio <4>hda: ST36530A, ATA DISK drive <4>hdc: NEC CD-ROM DRIVE:273, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 12715920 sectors (6511 MB) w/448KiB Cache, CHS=13456/15/63, (U)DMA <4>hdc: ATAPI 4X CD-ROM drive, 256kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>Partition check: <6> hda: [PTBL] [791/255/63] hda1 hda2 <4>floppy0: no floppy controllers found <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 28M <7>agpgart: no supported devices found. <6>[drm] Initialized tdfx 1.0.0 20010216 on minor 0 <6>[drm] Initialized radeon 1.1.1 20010405 on minor 1 <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 4096 bind 4096) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Freeing initrd memory: 562k freed <4>VFS: Mounted root (ext2 filesystem). <4>reiserfs: checking transaction log (device 03:02) ... <4>Warning, log replay starting on readonly filesystem <4>reiserfs: replayed 1 transactions in 2 seconds <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 256k freed <6>Adding Swap: 192740k swap-space (priority 42) Kernel logging (ksyslog) stopped. </boot.msg log snippet> Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

2 1

Top output not adding up.
by Rowan Reid 17 Oct '02

17 Oct '02

I copy pasted my top out put below. Not sure if that was a good idea or not. My question is why is it showing 58Megs of ram being used but the % memory usuage barely adds up to 30% also could someoone guide me in understanding what the pri ni and such are thanks 2:38am up 23 days, 15:25, 2 users, load average: 0.00, 0.00, 0.00 42 processes: 41 sleeping, 1 running, 0 zombie, 0 stopped CPU states: 0.7% user, 0.7% system, 0.0% nice, 98.4% idle Mem: 61992K av, 58900K used, 3092K free, 0K shrd, 13432K buff Swap: 192740K av, 9364K used, 183376K free 22804K cached PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 1227 wwwrun 9 0 5568 2260 1972 S 0.0 3.6 0:09 httpd 804 wwwrun 9 0 5360 2088 2068 S 0.0 3.3 0:10 httpd 26105 ***** 11 0 2104 2060 1872 S 0.0 3.3 0:01 sshd 26103 root 9 0 1732 1672 1504 S 0.0 2.6 0:00 sshd 26122 root 9 0 1640 1640 1252 S 0.0 2.6 0:00 bash 26106 ***** 9 0 1544 1544 1168 S 0.0 2.4 0:00 bash 26121 root 9 0 1116 1116 792 S 0.0 1.8 0:00 su 421 root 9 0 1056 1036 412 S 0.0 1.6 0:12 klogd 805 root 9 0 1208 1028 988 S 0.0 1.6 0:00 bash 26174 root 14 0 976 976 776 R 1.3 1.5 0:03 top 937 root 9 0 1332 876 748 S 0.0 1.4 0:14 nmbd 533 root 9 0 852 700 664 S 0.0 1.1 0:14 sshd 596 root 9 0 1308 688 572 S 0.0 1.1 0:00 sendmail 590 mail 9 0 1192 684 596 S 0.0 1.1 0:00 sendmail 938 root 8 0 1068 576 496 S 0.0 0.9 0:00 smbd 418 root 9 0 580 560 468 S 0.0 0.9 0:03 syslogd 802 root 8 0 4232 548 532 S 0.0 0.8 0:02 httpd 796 root 9 0 872 508 508 S 0.0 0.8 0:00 login 733 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 734 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 735 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 736 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 737 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 738 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 739 root 9 0 536 496 396 S 0.0 0.8 0:00 nscd 6891 root 8 0 492 436 416 S 0.0 0.7 0:00 inetd 713 root 8 0 484 424 384 S 0.0 0.6 0:00 cron 557 at 9 0 432 380 344 S 0.0 0.6 0:00 atd 798 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 799 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 800 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 801 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 803 root 9 0 448 380 380 S 0.0 0.6 0:00 mingetty 500 bin 9 0 432 348 348 S 0.0 0.5 0:00 portmap 765 root 8 0 504 248 232 S 0.0 0.4 0:00 smpppd 1 root 8 0 76 64 44 S 0.0 0.1 0:05 init 2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd 3 root 19 19 0 0 0 SWN 0.0 0.0 0:00 ksoftirqd_CPU0 4 root 9 0 0 0 0 SW 0.0 0.0 0:13 kswapd 5 root 9 0 0 0 0 SW 0.0 0.0 0:00 bdflush 6 root 9 0 0 0 0 SW 0.0 0.0 0:12 kupdated 9 root 9 0 0 0 0 SW 0.0 0.0 0:00 kreiserfsd Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2