Mailinglist Archive: opensuse (4053 mails)

< Previous Next >
Re: [SLE] Which CD is the Live CD?
  • From: Ron Cordell <roncordell@xxxxxxxxxxxxxxxx>
  • Date: Wed, 29 Aug 2001 10:55:23 -0400
  • Message-id: <200108291455.f7TEtNI07869@xxxxxxxxxxxxxxx>
I did that, but it still can't find it. What specifies the path to aic7xxx?
It appears that the kernel is looking in a different place than the
2.4.4-4GB/drivers tree.

-ronc

On Wednesday 29 August 2001 10:50 am, Harrell, Tim wrote:
> add aic7xxx to INITRD_MODULES in /etc/rc.config.
> Run SuSEconfig and mk_initrd (and lilo) just to make sure.
>
> If that doesn't work when you reboot, try the old one instead.
>
>
> Tim Harrell
>
> -----Original Message-----
> From: Ron Cordell [mailto:roncordell@xxxxxxxxxxxxxxxx]
> Sent: Wednesday, August 29, 2001 3:42 PM
> To: 'SuseLinux'
> Subject: Re: [SLE] Which CD is the Live CD?
>
>
> The problem isn't as grave as I thought. Since this machine used an
> Adaptec
> SCSI adapter card, the issue is that when the kernel boots, it is
> attempting
> to load the module "aic7xxx" and can't find it. I looked in the
> /lib/modules/linux-2.4.4-4GB/drivers/scsi directory and see that there
> is an
> aic7xxx driver there, one called aic7xxx_old, and another called
> aic7xxx/aic7xxx. So, where do one of these need to be placed so that
> kernel
> finds it when loading?
>
> -ronc
>
> On Wednesday 29 August 2001 10:29 am, Harrell, Tim wrote:
> > you should be able to mount the partition of interest
> >
> > eg, assuming root partition was on /dev/hda..
> >
> > mount /dev/hda /mnt (assuming default ext2 fs)
> >
> > cd /mnt
> >
> > root filesystem as was should be there
> >
> >
> > Tim Harrell
> >
> > -----Original Message-----
> > From: Ron Cordell [mailto:roncordell@xxxxxxxxxxxxxxxx]
> > Sent: Wednesday, August 29, 2001 2:52 PM
> > To: suse-linux-e@xxxxxxxx
> > Subject: Re: [SLE] Which CD is the Live CD?
> >
> >
> > OK, I've got the rescue system going. From there I should be able to
> > move the
> > files of interest on the main drive elsewhere and then re-install
>
> SuSE.
>
> > I
> > can't seem to determine how to mount the filesystems of the old system
> > and
> > undo what I did. Any ideas here?
> >
> > -ronc
> >
> > On Wednesday 29 August 2001 09:23 am, Ron Cordell wrote:
> > > I did a stupid thing and updated the kernel image on my fileserver
> >
> > without
> >
> > > thinking, from 2.4.0-4GB to 2.4.4-4GB. While this worked fine on two
> >
> > other
> >
> > > machines, I installed the wrong image on the fileserver, and now of
> >
> > course,
> >
> > > it won't boot, getting "Kernel Panic" messages.
> > >
> > > I think that the default kernel image on the SuSE 7.1 update/kernel
> >
> > ftp
> >
> > > directory is for i686 machines, while I needed to use the i386 image
> >
> > on
> >
> > > this machine - it is a Pentium 266.
> > >
> > > In any case, I can't seem to determine which CD out of the 7 is the
> >
> > Live
> >
> > > CD. I need to boot into Linux, mount the root file system, and
>
> install
>
> > the
> >
> > > correct kernel. Which CD is it?
> > >
> > > Any other advice and name calling is welcome.
> > >
> > > -ronc

< Previous Next >
References