Mailinglist Archive: opensuse (4053 mails)

< Previous Next >
Re: [SLE] Lan question
  • From: "Craig Sampson" <craig@xxxxxxxxxxx>
  • Date: Thu, 09 Aug 2001 17:36:54 +0800
  • Message-id: <20010809093327.6CB4CE655B@xxxxxxxxxxxx>
ntop might be closer to what you want. As I recall it shows
percentages of bandwidth used by individual machines in real time.
I'm not sure if there is a logging function but there might be.

Cheers,
Craig



On Thu, 9 Aug 2001 10:05:40 +0200, Felipe Blanco wrote:

>First of all, thanx Terence ;)
>tor,thanx for the info,but my router is not propietary,its property
of the
>carrier , in this case BT.
>And this way they doesnt give any access to the router. :(
>Mmmm,after i try nload like Jaakko said i must say that doesnt make
what i
>want
>This is the output of nload
>Device: eth0
>----------------
>Total In: 2259.93 MB
Total Out:
>1195.70 MB
>Current In: 8.05 kBit/s
Current Out:
>0.67 kBit/s
> (min 4.03, avg 18.31, max 54.90)
(min 0.00,
>avg 64.21, max 631.36)
>
>This info i can watch it in iptraf....and more detailed but not
like i want
>:(
>Imagine...a network with 50 workstations...i want to know in a
period of
>time what machine demands more bandwith....not the total of the
bandwith
>demanded every time.
>
>Thanx all for the answers
>
>----- Original Message -----
>From: "Tor Sigurdsson" <tosi@xxxxxxxxxxxxxxxxxxxx>
>To: "Felipe Blanco" <iolistas@xxxxxxxxxxxxx>
>Cc: <suse-linux-e@xxxxxxxx>
>Sent: Wednesday, August 08, 2001 9:05 PM
>Subject: Re: [SLE] Lan question
>
>
>>
>> Hi,
>>
>> As you have a cisco router, it's a pice of cake :)
>>
>> Here is a simulated session:
>>
>> user@host:~ > telnet router
>> Trying 192.168.0.254...
>> Connected to router.
>> Escape character is '^]'.
>>
>>
>> User Access Verification
>>
>> Password:
>> router>ena
>> Password:
>> router#conf te
>> Enter configuration commands, one per line. End with CNTL/Z.
>> router(config)#int eth0
>> router(config-if)#ip accounting output-packets
>> router(config-if)#^Z <--- here I press control and Z
>> router#wr mem
>> router#sh ip acco
>> Source Destination Packets
Bytes
>> 10.0.0.1 100.200.100.1 97
11762
>> 10.0.0.2 200.200.100.100 50
14436
>>
>> Accounting data age is 2
>> router#exit
>>
>>
>> As you can see, it's simplicity itself. The "ip accounting
output-packets"
>> entry only has to be set once. To stop accounting, use "no ip..."
>>
>> To clear the accounting cache use "clear ip acco" at the
"router#" prompt.
>>
>> -tosi
>>
>>
>> ann mi vikudagur 08  g£st 2001 17:43 skrifa ir £:
>> > I have a lan with up to 50 hosts,most of them are windoze...
>> > All go out through a cisco 2610 ....
>> >
>> > I know there is one person in my office that spend most of the
time
>> > downloading big files,like movies,videos and other stuff that
have a lot
>of
>> > size..
>> > When this person starts the "party" the connection gets slow
and slow...
>> >
>> > My answer is ...is there anyway to find out what machine is
"eating"
>most
>> > percent of bandwith ??
>> >
>> > The incoming traffic pass through a ethernet in a fw,so i only
need a
>tool
>> > like iptraf or something like this...to know wich of the 50
hosts is
>> > demanding more bandwith than others
>> >
>> > I dont know if i explain well the question,my english is not
like a
>native
>> > , i know!
>> >
>> > Thanx :)
>>
>> --
>> To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
>> For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
>> Also check the FAQ at http://www.suse.com/support/faq and the
>> archives at http://lists.suse.com
>>
>
>
>--
>To unsubscribe send e-mail to suse-linux-e-unsubscribe@xxxxxxxx
>For additional commands send e-mail to suse-linux-e-help@xxxxxxxx
>Also check the FAQ at http://www.suse.com/support/faq and the
>archives at http://lists.suse.com
>
>


============================================
Craig Sampson

Professional Systems Integration Pty Ltd

Email: craig@xxxxxxxxxxx
Phone: (08) 9444 5587
Fax : (08) 9444 5175
============================================



< Previous Next >
Follow Ups
References